Product Overview
The TOPUMP TB2PRO is a compact and portable electric tire inflator designed for bicycles and sports balls. It features a high-definition LED display, auto-stop function, and a built-in rechargeable battery for convenient use on the go.
Video: Overview of the TOPUMP TB2PRO features and usage.
Key Features
- High Definition LED Display: Shows real-time pressure, battery level, and pressure unit (BAR/PSI).
- Max 120 PSI & Auto Stop: Inflates up to 120 PSI with ±1PSI accuracy and automatically stops when target pressure is reached.
- Ultra Lightweight & Portable: Weighs only 130g with dimensions of 77x53x32mm, making it smaller than most smartphones.
- Fast Inflation: Can inflate a 700x25C road tire from 0-80 PSI in approximately 50 seconds.
- Built-in 450mAh Battery: Provides power for emergency situations while riding.
- Flexible Air Nozzles: Compatible with both Schrader and Presta valves, fulfilling a wide range of inflation needs.
Packing List
Ensure all items are present in the package:
- Inflator (TOPUMP TB2PRO)
- Waterproof Bag
- Seal Part (Spare)
- Instructions (User Manual)
- Presta Valve Converter
- Pillar (for Schrader valve)
- Cable (Type-C charging cable)
- Hose (Extension air hose)

Image: Contents of the TOPUMP TB2PRO package.
Product Components
Familiarize yourself with the parts of your inflator:
- Nozzle: Air outlet for inflation.
- LED Screen: Displays pressure value, battery level, and pressure unit.
- Power Button & Indicator: Long-press to power on/off, short-press to start/stop inflation.
- '+' Button: Increases target pressure.
- '-' Button: Decreases target pressure.
- Type-C Charging Port: For charging the device.

Image: Detailed view of the inflator's components.
Setup
Air Nozzle Adaptation
The inflator is ready for Presta valves right out of the box. For Schrader valves, you need to adjust the nozzle accordingly. The extension hose can be used directly, regardless of the presence of a pillar in the nozzle. When the target air pressure is above 100 PSI, it is recommended to use the hose to prevent air leakage from the nozzle.
For Presta Valve
The seal part should be inserted with the small hole facing outward. Remove the pillar if it's present.
For Schrader Valve
The seal part should be inserted with the big hole facing outward. Install the pillar into the nozzle.

Image: Nozzle configuration for Presta and Schrader valves.
Connecting the Air Valve
You can connect the inflator directly to the valve or use the extension air hose.
Direct Connection
- Adjust the nozzle mode (Presta or Schrader) as described above.
- Connect the inflator nozzle directly to the tire valve.
- Keep a tight grip on the nozzle while inflating.
Using the Extension Air Hose
- Attach the extension air hose to the inflator's nozzle.
- For Schrader valves, connect the hose directly. For Presta valves, use the included Presta valve converter. For sports balls, use the ball needle.
- Connect the appropriate end of the hose to the tire valve or sports ball.
- Important: For TPU inner tubes with resin valves, always use the extension air hose to prevent valve melting due to overheating.

Image: Connecting the inflator with the air hose for different valve types.
Operating Instructions
1. Power On and Set Target Air Pressure
- Long-press the Power button to turn on the inflator. The LED screen will illuminate, showing the real-time air pressure reading.
- To switch between PSI and BAR units, press the '+' and '-' buttons simultaneously.
- Use the '+' and '-' buttons to adjust your desired target pressure. The set pressure will be displayed for 3 seconds before reverting to the current pressure reading.
2. Inflating
- Short-press the Power button to start inflation.
- The inflator will automatically stop once the target air pressure is reached.

Image: Inflating a bicycle tire with the TOPUMP TB2PRO.

Image: Inflating a basketball with the TOPUMP TB2PRO.
3. Shut Down
- Long-press the Power button to turn off the inflator.
- If the air pump is powered on but not started, and there is no operation within 1 minute, it will automatically shut down.
Charging
Fully charge the inflator before first use. Use a suitable charger (Type-C 5V 2A or 7V 1.5A) to charge the device.
While charging, the battery indicator on the screen will illuminate and flash incrementally. Once fully charged, all battery indicator lights will be illuminated.
Maintenance
General Care
- Keep the inflator dry and clean.
- Store in a cool, dry place away from direct sunlight.
- Avoid dropping or subjecting the device to strong impacts.
Important Notes
- The pump may get hot during operation. Be cautious of burns when using for an extended period.
- When the tire pressure exceeds 80 PSI, the air pump may shut down upon activation. In this case, start the pump before connecting it to the tire, or reduce the tire pressure before inflating.
- It is normal to feel a sense of traction when pulling the inflator off a Presta valve after inflation.
- When inflating, press the pump firmly against the valve. If you hear air leaking, adjust the position or angle until the leak stops.
Troubleshooting
Refer to the table below for common error codes and their solutions:
| Error Code | Description | Solution |
|---|---|---|
| EE2 | Overcurrent Protection | Turn off and restart the device. |
| EE7 | Abnormal Motor Speed | Turn off and restart the device. |
| EE8 | Pressure Gauge Fault | Turn off and restart the device. |
| EE9 | Stall Protection | Turn off and restart the device. |
| E10 | Low Voltage Protection | Insufficient battery, please recharge. |
| HOT | Overtemperature Warning | Avoid prolonged use under direct sunlight. Avoid continuous operation for long periods. Please stop for 10 minutes before resuming inflation. |
Specifications
| Feature | Specification |
|---|---|
| Model | AS200PRO (TB2PRO) |
| Dimensions | 77 × 53 × 32 mm |
| Weight | 130 g |
| Battery Capacity | 450 mAh 7.4 V 3.33 Wh |
| Charging Port | Type-C 5V 2A; 7V 1.5A |
| Rated Current | 2.5 - 7.5 A |
| Max Pressure | 120 PSI |
| Digital Display | Yes |
| Type | Electric |
| Material | Plastic |
Working Performance (when fully charged)
The experimental data below is for reference only:

Image: Performance table for various tire types.
User Tips
- Cool-off Time: The pump can get hot during use. If inflating multiple tires, allow for a short cool-off period between uses to prevent overheating.
- Battery Life for Large Tires: For larger tires (e.g., 29x2.0), the battery might not be sufficient to fully inflate both tires from completely flat. Consider carrying a power bank for extended trips or pre-inflating partially.
- Quick Inflation: The pump is noted for its fast inflation speed, making it convenient for quick top-ups or emergency repairs.
- Portability: Its compact size makes it easy to carry on rides, fitting into small bags or pockets.
- Car Tires: This inflator is designed for bicycle tires and sports balls (max 120 PSI). It is generally not suitable for car tires, which require higher pressure and different valve types.
Warranty and Support
Manufacturer Information
Company: Chengdu Chendian Intelligent Technology Co., Ltd.
Address: No. 88, Tianchen Road, Chengdu, Sichuan, China
Warranty
Free repair or replacement within 2 years for non-user-induced damage.
Contact: support@topump.net
Product Optimization Notice
To continuously improve product functionality and user experience, the design, features, or accessories of the product may be adjusted. The actual item you receive may differ from the description in this manual. Please refer to the physical product as the final reference. The manufacturer reserves the right to modify products without prior notice. Thank you for your understanding and support!