konsenda 4K3301P2

Contents

4K 3x3 HDMI Video Wall Controller User Manual

Model: 4K3301P2 | Brand: konsenda

1. Introduction

The konsenda 4K 3x3 HDMI Video Wall Controller is designed to split a single HDMI or DVI high-definition image signal into up to nine blocks. These blocks are then assigned to nine video display units (such as LCD TVs or rear projection units) to form a large, dynamic video wall. This controller supports various splicing modes, allowing for flexible display configurations.

Important Note: This product is designed for horizontal screen configurations only; vertical screen setups are not supported.

2. Package Contents

Please check the package carefully to ensure all items are present and in good condition:

  • 1 x 4K 3x3 HDMI Video Wall Controller
  • 1 x DC Power Adapter
  • 1 x IR Remote Control (batteries not included)
  • 1 x User Manual
Product Packaging: Video Wall Controller, User Manual, Remote Control, Power Adapter
Figure 2.1: Product Packaging Contents

3. Features

  • Supports one DVI input or one HDMI input.
  • Input supports HDMI 1.4 and HDCP 1.4.
  • Input format: RGB/YUV 24bit.
  • Output format: RGB 4:4:4 24bit.
  • Supports 3x3 stitching, offering easy operation and plug-and-play functionality.
  • Input resolution support: 1920x1080P at 25/30/50/60Hz, 3840x2160P at 24/30Hz.
  • Output resolution support: 1920x1080P at 60Hz.
  • Supports up to 9 HDMI outputs.
  • Includes SPDIF audio output via optical fiber.
  • Supports RS232 control.
  • Remote control functionality.
  • Powered by DC 12V / 2A.

4. Specifications

AttributeValue
Model Number4K3301P2
Brand Namekonsenda
TypeHDMI-Compatible Cables
Connector ADVI, HDMI-Compatible
Connector BHDMI-Compatible
GenderMale-Female
ApplicationSpeaker, Computer, Multimedia, Monitor, Projector, Television, TV box, Amplifier
Outer Diameter3
CertificationCE, RoHS
OriginMainland China
Package TypeDouble Blister
Package Length20 cm
Package Width10 cm
Package Height5 cm
Package Weight0.8 kg

5. Setup Instructions

Follow these steps to set up your 4K Video Wall Controller:

  1. Connect Input Source: Connect your HDMI or DVI source device (e.g., computer, media player) to the 'HDMI IN' or 'DVI IN' port on the controller using a high-quality HDMI or DVI cable.
  2. Connect Display Units: Connect each of your display units (TVs, monitors) to the 'OUT1' through 'OUT9' HDMI ports on the controller using high-quality HDMI cables. Ensure all 19 pins of the HDMI cables are wired and shielded to prevent sync issues.
  3. Connect Power: Plug the DC Power Adapter into the 'DC 12V' port on the controller and then into a power outlet.
  4. Power On: Power on the controller and all connected display units.
  5. Configure Display Mode: Use the remote control or the 'MODE' button on the controller to select your desired video wall splicing mode (e.g., 3x3, 2x2, etc.).
Connection diagram for 4K Video Wall Controller showing input, 9 outputs, and power
Figure 5.1: Connection Diagram and Application Scenes
Diagram showing 1 HDMI input and 9 HDMI outputs for a 3x3 video wall
Figure 5.2: Support for 1 HDMI Input and 9 HDMI Outputs

6. Operating Instructions

6.1. Display Modes

The controller supports 13 different splicing and joining modes, allowing you to configure your video wall according to your needs. These modes include:

  • 1x1, 1x2, 1x3, 1x4
  • 2x1, 2x2, 2x3, 2x4
  • 3x1, 3x2, 3x3
  • 4x1, 4x2

You can easily switch between these modes using the IR remote control or by pressing the 'MODE' button on the controller unit.

Diagram illustrating 13 different video wall splicing and joining modes
Figure 6.1: 13 Kinds of Splicing and Joining Modes

6.2. Screen Rotation (180°)

The controller features a 180° screen rotation function, allowing you to flip the image of individual HDMI outputs. This is useful for adjusting screens to achieve thinner bezels, enhancing the visual comfort of your video wall. This rotation function is supported for each channel, but it is not available in 1x1 mode.

To adjust border orientation and rotate images, press the "180°Flip" button on the remote control. This feature is applicable for more than 2 screens, not for 1x1 mode.

Diagram showing independent 180 degree flip for each channel, specifically in 2x2 mode
Figure 6.2: Independent 180° Flip for Each Channel (Note: Only in 2x2 mode)
Instructions for adjusting border orientation and rotating images using the 180°Flip button on the remote
Figure 6.3: Adjust Border Orientation and Image Rotation

6.3. Audio Output

The controller utilizes HD splicing technology to provide independent SPDIF stereo audio output. This allows you to connect the audio output to external sound systems or headphones for an immersive audio-visual experience.

Diagram showing independent audio output connection to an audio system
Figure 6.4: Independent Audio Output Setup

6.4. Control Methods

The device can be controlled via:

  • Push-Buttons: Manual buttons on the unit for basic functions.
  • IR Remote Control: For convenient control from a distance.
  • RS232: For advanced remote control and integration with control systems.
Image showing both push-button and IR remote control methods for the video wall controller
Figure 6.5: Push-Button and Remote Control Switch

7. Maintenance

To ensure optimal performance and longevity of your video wall controller, please observe the following maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the unit. Do not use liquid or aerosol cleaners.
  • Ventilation: Ensure the unit is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
  • Power: Disconnect the power adapter when the unit is not in use for extended periods.
  • Cable Management: Keep all cables neatly organized and avoid sharp bends or excessive tension.
  • Environment: Avoid exposing the unit to extreme temperatures, humidity, or direct sunlight.

8. Troubleshooting

  • No Video Output:
    • Check all HDMI/DVI cable connections to ensure they are secure.
    • Verify that the input source is powered on and outputting a signal.
    • Ensure the correct input is selected on the controller.
    • Confirm that all display units are powered on and set to the correct HDMI input.
  • Poor Picture Quality or Sync Issues:
    • Use qualified HDMI cables with all 19 pins wired and shielded. Poor quality cables are a common cause of sync issues.
    • Ensure the input resolution is compatible with the controller's capabilities (up to 4K 30Hz in, 1080P 60Hz out).
  • No Audio Output:
    • The controller supports PCM 2CH stereo audio only from the Aux or Digital Toslink port.
    • If the input is 4K 30Hz, there might be no audio in some cases. Try setting the input resolution to 1080P.
    • Check audio cable connections to your external audio system.
  • Remote Control Not Working:
    • Ensure batteries are correctly inserted and not depleted.
    • Point the remote directly at the IR receiver on the controller.
    • Remove any obstructions between the remote and the controller.
  • 180° Rotation Not Working:
    • Remember that 180° rotation is not supported in 1x1 display mode.
    • Ensure you are pressing the correct '180°Flip' button on the remote.

9. User Tips

  • Cable Quality: Always use high-quality, fully wired, and shielded HDMI cables for all connections to ensure stable signal transmission and prevent common sync issues.
  • Resolution Management: While the controller supports 4K 30Hz input, the output is 1080P 60Hz. If you experience audio problems with 4K 30Hz input, try reducing the source resolution to 1080P.
  • Professional Displays: For the best video wall experience, it is recommended to use professional video wall displays.
  • Horizontal Orientation: This controller is specifically designed for horizontal screen setups. Attempting vertical screen configurations may lead to unexpected results.

10. Warranty and Support

This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official konsenda support website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.