1. Product Overview
The SMAEL 8108 is a versatile digital sports watch designed for durability and functionality. It features a clear digital display, multiple modes including stopwatch and alarm, and is built to withstand various activities with its shock-resistant and waterproof design.

Button Functions:
The watch features four primary buttons:
- LIGHT (A Key): Activates the EL backlight.
- MODE (B Key): Cycles through different operational modes.
- RESET (C Key): Used for resetting values or accessing sub-settings.
- START/STOP (D Key): Used to start/stop functions or adjust values.

2. Setup and Initial Configuration
Setting Time and Date:
- From the Normal Time Display Mode, press the MODE (B) button three times to enter the Time and Date Setting Mode. The "Seconds" will start flashing.
- Press the START/STOP (D) button to reset the seconds to zero.
- Press the RESET (C) button. The "Hours" will start flashing.
- Press the START/STOP (D) button to adjust the hour. Repeatedly pressing D will cycle through hours and also toggle between 12-hour and 24-hour formats.
- Press the RESET (C) button. The "Minutes" will start flashing.
- Press the START/STOP (D) button to adjust the minutes.
- Press the RESET (C) button. The "Month" will start flashing.
- Press the START/STOP (D) button to adjust the month.
- Press the RESET (C) button. The "Date" will start flashing.
- Press the START/STOP (D) button to adjust the date.
- Press the RESET (C) button. The "Week" (day of the week) will start flashing.
- Press the START/STOP (D) button to adjust the day of the week.
- Once all settings are complete, press the MODE (B) button to exit the Time and Date Setting Mode and return to the Normal Time Display Mode.
3. Operating Instructions
Mode Switching:
Press the MODE (B) button to cycle through the watch's functions in the following order:
Normal Time Display Mode → Chronograph Mode → Alarm Mode → Time Setting Mode → Normal Time Display Mode
EL Backlight:
In any mode, press the LIGHT (A) button to illuminate the display with the EL backlight for approximately 3 seconds.
Chronograph (Stopwatch) Mode:
- From the Normal Time Display Mode, press the MODE (B) button once to enter Chronograph Mode. The display will show "00:00:00".
- Press the START/STOP (D) button to start the stopwatch.
- To pause the stopwatch, press the START/STOP (D) button again.
- To resume timing, press the START/STOP (D) button.
- To record a split time (lap time) while the stopwatch is running, press the RESET (C) button. The current split time will be displayed. The stopwatch continues to run in the background.
- To return to the running stopwatch display after viewing a split time, press the RESET (C) button again.
- To stop the stopwatch completely, press the START/STOP (D) button.
- To reset the stopwatch to "00:00:00" after it has been stopped, press the RESET (C) button.
- To exit Chronograph Mode and return to Normal Time Display Mode, press the MODE (B) button.
Alarm Mode:
Setting the Alarm Time:
- From the Normal Time Display Mode, press the MODE (B) button twice to enter Alarm Mode.
- Press the RESET (C) button. The "Hours" digit of the alarm time will start flashing.
- Press the START/STOP (D) button to adjust the alarm hour. Be mindful of AM/PM indicators if using 12-hour format.
- Press the RESET (C) button again. The "Minutes" digit of the alarm time will start flashing.
- Press the START/STOP (D) button to adjust the alarm minutes.
- Once the alarm time is set, press the MODE (B) button to exit the Alarm Setting Mode and return to the Alarm Mode display.
Turning Alarm and Hourly Chime ON/OFF:
- While in Alarm Mode (after pressing MODE (B) twice), press the START/STOP (D) button to toggle the Alarm ("ALM") and Hourly Chime ("SIG") functions.
- If the "ALM" icon is displayed, the alarm is ON. If the "SIG" icon is displayed, the hourly chime is ON. If both are displayed, both are ON. If neither is displayed, both are OFF.
4. Maintenance and Care
- Water Resistance: The watch is rated 5ATM/50M waterproof, meaning it can withstand rain and water splashes. You can wear it while bathing or washing your car.
- Important Water Resistance Note: Do NOT operate any buttons while the watch is submerged in water. This can compromise the water resistance seal.
- Cleaning: Wipe the watch regularly with a soft, dry cloth to remove dirt and sweat. For stubborn grime, a slightly damp cloth can be used, followed by drying.
- Storage: Store the watch in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Battery: The watch includes a battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a professional to ensure water resistance is maintained.
5. Troubleshooting
- Display is blank or dim: The battery may be low or depleted. Replace the battery.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not specified for this model). If the issue persists after a battery change, contact customer support.
- Time is inaccurate: Re-set the time following the "Setting Time and Date" instructions. If the problem continues, the battery might be weak or the movement may require servicing.
- Water appears inside the watch: Immediately stop using the watch and seek professional repair. Do not attempt to dry it yourself, as this can cause further damage.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | SMAEL |
| Model Number | 8108 |
| Display Type | Digital |
| Movement | Electronic / Digital |
| Case Material | Plastic |
| Case Shape | Rectangle |
| Case Thickness | 18mm |
| Dial Diameter | 47mm |
| Dial Window Material Type | Hardlex |
| Band Material Type | PU |
| Band Width | 22mm |
| Band Length | 24.5 cm |
| Clasp Type | Buckle |
| Water Resistance Depth | 5Bar (50 meters) |
| Features | Luminous, Back Light, Shock Resistant, Repeater, Complete Calendar, DIVER, Alarm, Week Display |
| Battery Included | Yes |
| Boxes & Cases Material | Plastic |

7. User Tips
- Readability: The EL backlight is very useful in low-light conditions. Don't hesitate to use it when needed.
- Water Resistance: While the watch is waterproof for daily use, avoid pressing buttons underwater to prevent water ingress.
- Durability: The shock-resistant design makes it suitable for active lifestyles, but extreme impacts should still be avoided.
- Time Format: Remember you can switch between 12-hour and 24-hour formats during time setting by repeatedly pressing the D button when the hour is flashing.
8. Warranty and Support
For any issues, warranty claims, or technical support, please contact the seller or manufacturer directly. Keep your purchase records for reference.
A user manual in PDF format is also available for download: User Manual (PDF)