KNOA MS-1500W

Contents

KNOA MS-1500W Digital Display Power Supply User Manual

Model: MS-1500W | Brand: KNOA

1. Introduction

The KNOA MS-1500W is a high-power digital display switching power supply (SMPS) designed for various applications requiring adjustable DC voltage and current. It features a digital display for precise monitoring of output parameters and offers multiple protection mechanisms. This manual provides essential information for the safe and effective use of your power supply.

2. Safety & Warnings

Important Safety Information:

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

3. Product Overview

The MS-1500W is a robust power supply with a digital display for real-time voltage and current readings. It supports both 110VAC and 220VAC input and provides a wide range of adjustable DC output voltages.

KNOA MS-1500W Digital Display Power Supply with key features highlighted

Figure 1: KNOA MS-1500W Digital Display Power Supply. Features include adjustable voltage/current, multiple protection, and 50/60Hz operation.

Key components include high-performance electrolytic capacitors, a pure copper transformer for safety, and a FeSiAl pure copper magnetic ring for stable performance.

Internal components of the MS-1500W power supply, showing capacitors, transformer, and magnetic ring

Figure 2: Internal view highlighting imported chips, brand capacitors, pure copper transformer, and FeSiAl magnetic ring for stable output.

The unit also features temperature-controlled fans for efficient cooling during operation.

Rear view of the power supply showing two temperature control fans

Figure 3: Rear view of the power supply with temperature control fans.

4. Specifications

AttributeValue
Model NumberMS-1500W
Brand NameKNOA
TypePower Supply
Output Power1500W (>500W)
Rated Capacity>1000VA
Input Voltage110VAC / 220VAC (selectable), operating range 180-264V
Output Voltage (DC)Adjustable from 0V up to 200V (depending on model: 0-12V, 15V, 24V, 27V, 30V, 36V, 48V, 60V, 68V, 72V, 85V, 90V, 100V, 110V, 150V, 200V)
Output Current0-125A (adjustable)
Output Frequency47-63Hz
Output TypeSINGLE
Dimensions (L×W×H)248mm × 135mm × 70mm
Packaged Weight1.9KG
CertificationCE, RoHS
OriginMainland China

5. Setup

5.1 Initial Inspection

Before first use, carefully remove all protective films and packaging materials from the device. Inspect the power supply for any visible damage. Do not use if the unit appears damaged.

5.2 Input Voltage Selection

The power supply features a switch to select between 110V and 220V AC input. Ensure this switch is set correctly according to your local mains voltage before connecting the power supply to an AC source. The default setting is typically 220V.

Image showing the 110V/220VAC input voltage selection switch

Figure 4: 110V/220VAC Input Voltage Switch. Ensure correct selection for your region.

5.3 Wiring Connections

WARNING: High voltage is present. All wiring should be performed by qualified personnel following local electrical codes and safety standards.

Connect the power supply as follows:

  1. AC Input (L, N, GND): Connect your AC mains power to the 'L' (Live), 'N' (Neutral), and 'GND' (Ground) terminals.
  2. DC Output: Connect your load to the 'Output positive' (+V) and 'Output negative' (-V) terminals.
  3. Grounding: Ensure proper grounding by connecting the chassis ground terminal to an earth ground.
Close-up of the power supply terminals showing AC input, GND, output negative, output positive, and adjustment potentiometers

Figure 5: Connection terminals for AC input, ground, and DC output, along with voltage and current adjustment potentiometers.

6. Operation

6.1 Powering On/Off

  1. After ensuring all connections are secure and the input voltage switch is correctly set, connect the power supply to the AC mains.
  2. The digital display will illuminate, showing the current output voltage and current.
  3. To power off, disconnect the power supply from the AC mains.

6.2 Adjusting Output Voltage and Current

The MS-1500W allows for precise adjustment of both output voltage and current. Use a small screwdriver to carefully turn the potentiometers located near the output terminals:

  • Voltage Adjustment: The potentiometer labeled 'V ADJ' or similar controls the output voltage (0-100% adjustable).
  • Current Adjustment: The potentiometer labeled 'A ADJ' or similar controls the output current (10-100% adjustable).

Monitor the digital display while making adjustments to achieve the desired output parameters.

Video 1: Demonstration of voltage and current adjustment on the MS-1500W Digital Display Power Supply.

7. Maintenance

  • Cleaning: Keep the power supply clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
  • Ventilation: Ensure that the ventilation openings and fans are not obstructed to prevent overheating. Regular checks for dust buildup in the fans are recommended.
  • Storage: When not in use, store the device in a dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

  • No Power/Display:
    • Check if the AC input cable is securely connected.
    • Verify that the 110V/220V input voltage switch is set correctly for your region.
    • Ensure the AC mains power source is active.
  • No Output Voltage/Current:
    • Check if the output terminals are correctly wired to the load.
    • Verify that the voltage and current adjustment potentiometers are not set to zero.
    • If the power supply has an overload protection feature, it might have tripped. Reduce the load and restart the unit.
  • Overheating:
    • Ensure adequate ventilation around the power supply. Clear any obstructions from the fans.
    • Reduce the load if the unit is operating at its maximum capacity for extended periods.

If problems persist after attempting these troubleshooting steps, please contact customer support.

9. User Tips

No specific user tips were available from provided reviews or Q&A content. Always ensure proper ventilation and correct input voltage selection for optimal performance and longevity of the power supply.

10. Warranty & Support

For warranty claims, technical support, or service inquiries, please refer to the manufacturer's contact information provided below. Keep your purchase receipt as proof of purchase.

Manufacturer Information:

  • Company Name: SHENZHEN KNOA TECHNOLOGY CO., LTD.
  • Address: Unit 1606, 1, Building B, Jida Garden, 38 Jinyun Road, Nansan Community, Buji Street, Longgang District, Shenzhen, China
  • Email: 294411620@qq.com
  • Telephone: +86 15889456615

EU Authorized Representative:

  • Company Name: MJCM SARL
  • Address: FR-78 avenue des Champs Elysees Bureau 326
  • Email: mjcm190928@gmail.com
  • Website/Telephone: +33-767213611

11. Compliance Information

This product is designed and manufactured to comply with relevant safety and regulatory requirements.

  • For Electrical or Electronic Products: Relating to electrical safety, electromagnetic compatibility.
  • List of Directives: LVD directive 2014/35/EU
  • Test Standards: EN IEC 62368-1:2024/A11:2024

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.