1. Introduction
This manual provides instructions for the proper setup, operation, maintenance, and troubleshooting of your FGHGF Power Adaptor and/or Charging Base, designed for use with compatible Proscenic robot vacuum cleaner models. Please read this manual thoroughly before use to ensure optimal performance and safety.
2. Setup
2.1 Package Contents
Depending on your purchase, your package may include:
- 1x Charging Base
- 1x Power Adaptor
2.2 Charging Base Placement
For optimal performance and robot docking, position the charging base carefully:
- Place the charging base against a wall on a hard, flat surface.
- Ensure there is at least 0.5 meters (approximately 1.6 feet) of clear space to the right side of the charging base.
- Ensure there is at least 1.5 meters (approximately 4.9 feet) of clear space in front of the charging base.
- Connect the power adaptor cable to the DC input port on the back of the charging base.

2.3 Power Adaptor Connection
Plug the power adaptor into a standard wall outlet. Ensure the connection is secure.

3. Operating Instructions
3.1 Charging the Robot Vacuum
To charge your Proscenic robot vacuum cleaner (models 880T, 880L, D500, D550, GT320), gently place it onto the charging base. Ensure the charging contacts on the robot align with those on the base. The robot should indicate that it is charging (refer to your robot vacuum's specific manual for charging indicators).
3.2 Direct Power Adaptor Use (if applicable)
If your robot vacuum supports direct charging via the power adaptor without the base, connect the DC barrel connector of the power adaptor directly into the robot's charging port. Ensure a secure connection.
4. Maintenance
4.1 Cleaning
- Regularly wipe the charging contacts on both the charging base and the robot vacuum with a clean, dry cloth to ensure good electrical connection.
- Wipe the exterior of the charging base and power adaptor with a dry cloth. Do not use liquid cleaners, sprays, or solvents, as these can damage the components.
4.2 Storage
When not in use for extended periods, disconnect the power adaptor from the wall outlet and store the charging base and adaptor in a cool, dry place away from direct sunlight and moisture.
5. Troubleshooting
- Robot not charging:
- Ensure the power adaptor is securely plugged into both the wall outlet and the charging base.
- Verify that the wall outlet is functional by plugging in another device.
- Clean the charging contacts on both the robot vacuum and the charging base to remove any dust or debris that might obstruct the connection.
- Ensure the robot is correctly docked on the charging base, with contacts fully aligned.
- Power adaptor not working:
- Check the power adaptor cable for any visible damage or kinks.
- Try plugging the adaptor into a different wall outlet.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | FGHGF |
| Model Number | FOR Proscenic 880T/880L/D500/D550/GT320 |
| Material | Metal, ABS Plastic |
| Vacuum Part Type | BRUSHES (Accessory) |
| Charging Base Input | 24V 600mA |
| Package Length | 30 cm |
| Package Width | 20 cm |
| Package Height | 18 cm |
| Package Weight | 0.52 kg |
7. User Tips
- For consistent charging, ensure the charging base is placed on a hard, flat surface, not on thick carpets or rugs that might interfere with the robot's docking.
- Keep the area around the charging base clear of any small objects, cables, or furniture that could prevent the robot from successfully returning to its dock.
- Periodically check and clean the metal charging contacts on both the base and the robot vacuum to prevent charging issues caused by dust buildup.
8. Warranty and Support
This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your original purchase or contact the seller directly. If you encounter any issues that cannot be resolved using the troubleshooting guide, please reach out to the manufacturer's customer support for assistance.