JIKONG JK-B1A8S10P

Contents

JIKONG Smart BMS JK-B1A8S10P + 3.2inch LCD Display User Manual

Intelligent Active Balanced Battery Management System for 4S-8S Lifepo4, Li-Ion, and LTO Batteries

1. Product Overview

The JIKONG Smart BMS JK-B1A8S10P is an intelligent active balancing Battery Management System designed for high-capacity series lithium battery packs. It provides comprehensive management and protection for 4S-8S Lifepo4, Li-Ion, and LTO batteries.

Key features include voltage acquisition, high current active balancing (1A), overcharge, over-discharge, overcurrent, and over-temperature protection. It also integrates a coulomb meter, Bluetooth communication, and optional GPS remote functionality. The system is designed to ensure battery consistency, extend battery life, and improve overall performance.

The protection board utilizes energy transfer active balancing technology with independent intellectual property rights, achieving a maximum continuous 1A balance current. This technology significantly improves battery consistency, extends range, and delays battery aging.

A mobile APP (Android and iOS compatible) allows users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth. The compact design and full functionality make it suitable for various applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

2. Functional Characteristics

  • LED Bluetooth Status Indicator: Provides visual feedback on Bluetooth connection status.
  • APP Bluetooth Remote Operation: Control and monitor the BMS via a mobile application.
  • Battery Capacity Calculation: Accurate tracking of battery capacity.
  • High Precision Voltage Acquisition (±3mV): Ensures accurate cell voltage monitoring.
  • High Precision Current Acquisition: Monitors charge and discharge currents with high accuracy.
  • Support Information Screen Display: Compatible with an external 3.2-inch LCD display for real-time data.
  • Accurate Time Logging: Records operational data for analysis.
  • Optional Interfaces: Support for RS485, CAN, GPS communication, and UART.
  • Optional Heating Function: Prevents performance degradation in low temperatures.
  • Optional Battery Parallel Function: For energy storage applications.
  • Optional ACC Detection Function: Enables discharge based on ACC signal.
  • Comprehensive Protection: Overcharge, overvoltage, overcurrent (charge/discharge), over-temperature, low-temperature, and short circuit protection.
  • Intelligent Sleep: Reduces self-consumption when idle.
  • Emergency Switch: Provides temporary operation during critical events.
JIKONG BMS with key features listed

Figure 1: JIKONG BMS JK-B1A8S10P with key functional characteristics.

3. Setup and Installation

3.1. Packing List

Before installation, please verify that all components are present:

  • BMS x 1
  • Sampling line x 1 (70cm long)
  • NTC (Temperature Sensor) x 1 (40cm long)
  • Switch x 1 (50cm long)
  • 3.2 inch Display x 1 (if selected)
Packing list for JIKONG Smart BMS

Figure 2: Included components in the package.

3.2. Wiring Instructions

The JK-B1A8S-10P series protection board is suitable for 3-8 series lithium battery packs. The wiring method varies depending on the number of cells in your battery pack. Always ensure all cables are connected correctly before powering on the BMS.

  1. Connect all balance cables to the battery cells.
  2. Insert the balance cable into the BMS.
  3. Connect the B-line (total negative electrode) and the P-line (total positive electrode) to the battery.
Wiring diagram for 8-string cells

Figure 3: Wiring diagram for an 8-string cell configuration. Ensure B- and P- connections are correct, and balance wires are connected sequentially from B1 to B8.

Wiring diagram for 4-string cells

Figure 4: Wiring diagram for a 4-string cell configuration. Follow the same principles as the 8-string diagram for B-, P-, and balance wire connections.

3.3. Device Activation

Before powering on the protection board, double-check that the balance cable is properly connected and that the P- and B- lines are correctly connected. Ensure the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or damage.

The protection board does not have a power-on control switch. It is designed for charging activation mode, meaning the charger voltage must be 2V higher than the battery voltage. After battery assembly, connect the charger to activate the protection board.

Alternatively, if you have the optional display screen and button, you can activate the BMS by inserting the cable into the display interface and pressing the button.

4. Operating Instructions

4.1. Mobile APP Operation

The JIKONG Smart BMS supports a mobile APP for Android and iOS. Scan the QR code below to download the APP. Android devices require Android 7 or higher.

QR code for JIKONG mobile APP

Figure 5: QR code to download the JIKONG mobile APP.

The APP allows you to:

  • Monitor real-time battery status (voltage, current, temperature, SOC, etc.).
  • Modify working parameters of the protection board.
  • Control charge and discharge switches.
  • View cell voltages and balance status.
Mobile APP and PC software interface for JIKONG BMS

Figure 6: Multi-screen display options including mobile APP, PC software, and dedicated home storage display.

4.2. Active Equalization

The BMS features active equalization to transfer energy from higher-voltage cells to lower-voltage cells, ensuring voltage balance. Users can set the balance trigger pressure difference (mV) in the APP. When the voltage difference between any two battery strings exceeds the set value, equalization automatically activates. It deactivates when the difference falls below the set value. The default balance current is 1A, adjustable based on battery capacity. If not needed, the balancing function can be disabled in the APP.4.3. Display Screen Function

The BMS is pre-equipped with a display interface. Users can connect an optional JIKONG display screen (e.g., 3.2-inch LCD display) to conveniently view battery information such as voltage, current, temperature, and number of strings.

JIKONG BMS with 3.2-inch LCD Display

Figure 7: JIKONG Smart BMS with its 3.2-inch LCD display.

Video 1: Demonstrates the JIKONG BMS and its display interface, showing various settings and monitoring screens.

4.4. Heating Function (Optional)

For low-temperature environments, the BMS supports an optional heating function using a resistance heater or heating film. This prevents charging/discharging issues due to reduced battery activity. The heating current is 20A. Users can enable/disable this function via the APP based on ambient temperature. It is recommended to use a normally closed temperature switch (45°C to 65°C) in the heating circuit as a secondary protection to prevent thermal runaway.4.5. Communication Function (Optional)

The BMS supports optional CAN and RS485 communication. Users can configure the address and communication protocol via the APP or host computer based on their specific requirements and scenarios. Refer to the Jikong Protection Board communication protocol document for detailed information.

Inverter communication protocol setup via host computer

Figure 8: Setting inverter communication protocols via the host computer interface.

5. Maintenance

To ensure optimal performance and longevity of your JIKONG Smart BMS, regular maintenance is recommended:

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion.
  • Software Updates: Keep the mobile APP and BMS firmware updated to the latest versions to benefit from new features and bug fixes.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature range (-30°C to 70°C) and avoid exposure to excessive moisture or dust. The aluminum alloy shell provides good protection against external environmental damage.
  • Cleaning: Gently clean the BMS and display unit with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
  • Parameter Review: Occasionally review the BMS parameters in the APP to ensure they are still appropriate for your battery configuration and usage patterns.

6. Troubleshooting and Protection Functions

The JIKONG Smart BMS is equipped with multiple protection mechanisms to safeguard your battery and system. Understanding these can help in troubleshooting:

6.1. Overvoltage Protection (Charge)

The BMS will stop charging if any cell's voltage exceeds the set overcharge protection voltage. Charging resumes when all cell voltages drop below the overcharge recovery voltage. Default values are configurable via the APP.6.2. Undervoltage Protection (Discharge)

If any cell's voltage falls below the set undervoltage protection voltage during discharge, the BMS will stop discharging. Discharge resumes when all cell voltages rise above the undervoltage recovery voltage. If any cell reaches the automatic shutdown voltage, the BMS will shut down to protect the battery.6.3. Overcurrent Protection (Charge/Discharge)

If the charging or discharging current exceeds the set continuous current for a specified delay, the BMS will trigger overcurrent protection and stop the respective operation. It will resume after the overcurrent release time. The maximum continuous discharge current should not exceed 100A.

6.4. Overtemperature Protection

If the BMS detects a temperature above the set over-temperature protection value (for charge or discharge), it will halt the operation. It resumes when the temperature drops below the recovery value.

6.5. Low Temperature Protection (Charge)

If the BMS detects a temperature below the set low-temperature protection value during charging, it will stop charging. Charging resumes when the temperature rises above the recovery value. For extremely cold regions, consider using the optional heating function.6.6. Short Circuit Protection

The BMS has a standard short circuit protection. If a short circuit is detected, the BMS will stop the operation. It will resume after a set recovery time. If a short circuit occurs during initial connection of a charger or load, increasing the short circuit protection delay in the APP might resolve it, as it could be due to high instantaneous peak currents.6.7. Emergency Switch

In case of issues like over-temperature, over-discharge, overcharge, or cell string drop, activating the emergency switch via the APP will allow the BMS to operate for 30 minutes, providing an emergency use period. This function overrides certain protections temporarily.

7. Product Specifications

7.1. Basic Parameters

ParameterValueUnit
Supply Voltage7.5-36V
Operating Power Consumption<1300mW
Operating Temperature-30-70°C
Max. Number of Collection Strings8String
Max. Balancing Current1A
Max. Charging Current100A
Max. Discharge Current100A
Max. Instantaneous Current200A
Max. Internal Loop Resistance1.0803mΩ
Protective Plate Size (L×W×H)150.9×105.26×15.6mm
Finished Weight364g
Product Parameters Table

Figure 9: Detailed product parameters table.

BMS dimensions diagram

Figure 10: Dimensions of the JIKONG Smart BMS JK-B1A8S-10P.

7.2. Default Parameters (Example for Lifepo4)

The BMS comes with pre-configured default parameters for various battery types. Below are typical default settings for a Lifepo4 battery:

ParameterLifepo4 DefaultUnit
Balancing Initial Voltage3V
Max. Balancing Current1A
Unit Overcharge Voltage3.6V
Single Overcharge Protection Recovery3.55V
Monomer Undervoltage Protection2.6V
Single Undervoltage Protection Recovery2.65V
Automatic Shutdown Voltage2.5V
Trigger Balancing Differential Pressure0.01V
Charging Overcurrent Protection Delay30S
Discharge Overcurrent Protection Delay300S
Short Circuit Protection Delay5uS
Charging Overtemperature Protection70°C
Charging Low Temperature Protection-20°C

8. User Tips

  • Always double-check all wiring connections, especially balance leads and main power cables (P- and B-), before applying power to prevent damage.
  • When first activating the BMS, ensure a charger is connected with a voltage at least 2V higher than the battery pack voltage.
  • For optimal performance and safety, regularly monitor battery parameters via the mobile APP or external display.
  • If experiencing frequent short-circuit protection trips during initial connection of a charger or load, try increasing the short circuit protection delay setting in the APP.

9. Warranty and Support

For detailed warranty information, technical support, or service inquiries, please refer to the official JIKONG documentation or contact your vendor. A comprehensive user manual in PDF format is available for download: JIKONG Smart BMS User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.