IPEGA PG-P5S039

Contents

IPEGA Multi-Functional Horizontal Stand

Model: PG-P5S039

Introduction

Thank you for purchasing the IPEGA PG-P5S039 Multi-Functional Horizontal Stand. This stand is designed to enhance your gaming experience by providing efficient cooling for your PS5 Slim/Pro console, convenient charging for two original controllers, and customizable RGB lighting effects. It also includes a dedicated headphone holder and a USB 3.0 expansion port.

Please note: This product is a stand only and does not include the console, controllers, or headphones.

Package Contents

Please check the package for the following items:

  • Main Stand Base (Left and Right Supports)
  • Cooling Fan Module
  • Headphone Holder
  • Console Fixing Screw
  • EVA Pad (for PS5 Slim Digital Edition)
Disassembled components of the IPEGA PG-P5S039 stand

Image: All components of the stand laid out, including the main base, fan module, headphone holder, and screw.

Setup Instructions

Follow these steps to assemble and set up your multi-functional stand:

  1. Prepare the Console: Place your PS5 Slim/Pro console horizontally. If you have the PS5 Slim Digital Edition, first place the provided EVA pad at the bottom of the console where the stand supports will attach.
  2. Attach Stand Supports: Position the left and right stand supports to align with the bottom casing of your console. Gently press them into place until they securely click.
  3. Install Headphone Holder: Insert the headphone holder into the designated slot on the left stand support.
  4. Secure Console: Locate the screw hole at the bottom of your console. Use the provided console fixing screw to secure the console to the stand base.
  5. Connect Cooling Fan Module: Align the cooling fan module with the ventilation area on the side of your console. Gently push it into place.
  6. Connect Fan Power: Plug the USB cable from the cooling fan module into the corresponding USB port on the stand base. Ensure all connections are firm.
  7. Place Headphones: You can now place your gaming headphones on the installed headphone holder.
  8. Connect Power: Connect the stand's main USB cable to a USB port on your PS5 console or a compatible USB power adapter (5V/2A recommended).

Video: Official product demonstration showing the assembly process, controller charging, fan operation, and RGB lighting effects.

Operating Instructions

Learn how to use the various features of your IPEGA stand:

Controller Charging

  • Insert your PS5 original controllers (including Elite controllers) into the charging ports on the left stand support.
  • A red indicator light will illuminate, signifying that the controller is currently charging.
  • Once the controller is fully charged, the indicator light will turn blue.
  • Charging time for a PS5 controller is approximately 3-5 hours.

Cooling Fans

  • The stand is equipped with three low-noise, high-efficiency cooling fans.
  • Use the fan switch button on the stand base to cycle through three different fan speed levels (Low, Medium, High) or turn the fans off.

RGB Lighting

  • The stand features integrated RGB light strips on the left and right sides of the base.
  • Press the
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.