Introduction
Welcome to the Black Shark Bkb02 Inductive Magnetic Switch Wireless Gaming Keyboard user manual. This guide provides detailed instructions on setting up, operating, and maintaining your new keyboard to ensure optimal performance and longevity. The Bkb02 features a multifunctional knob, three-mode connectivity, quick trigger response, and customizable RGB lighting, designed for both gaming and productivity.
This keyboard incorporates advanced "Tesla" inductive switches, offering precise 0.1mm stroke adjustment for instant trigger and rapid recovery, providing a low-latency experience crucial for e-sports. Its robust construction and versatile connectivity options make it a powerful tool for various applications.
Key Features
- Inductive Magnetic Switches: "Tesla" inductor shaft with 0.1mm precision stroke adjustment for instant trigger and rapid recovery. Bidirectional inductor for stability and linearity, unaffected by temperature or vibration.
- Three-Mode Connectivity: Seamless switching between Wired (USB), 2.4G Wireless, and Bluetooth connections. Compatible with Windows, MacOS, iOS, and Android devices.
- Multifunctional Knob: Easily adjust volume (rotate left/right) and mute (press).
- RGB Lighting: Customizable Neon cool RGB light effects with Black Shark's exclusive drive for personalized settings.
- PBT Keycaps: Coarse sand PBT material, non-slip, non-oiling, and micro-transparent for enhanced RGB effect.
- Hard GAS Structure: Five-layer internal structure (positioning plate, silencer sandwich cotton, shaft lower pad, shaft seat silencer bottom cotton, bottom shell silencer cotton) to eliminate empty sound and ensure stable typing.
- Quick Trigger (RT) & Dynamic Key (DKS): RT sensitivity as low as 0.1mm for quick trigger and emergency stop. DKS function allows setting different key press and lift states for varied responses.
- Hot-Swap Capability: Supports Tesla Inductive switches for easy customization (Note: only supports Tesla Inductive switch series).
- Long Battery Life: Up to 120 hours of endurance.
- 87-Key Standard Layout: Practical layout for both gaming and general use.
Package Contents
Please check the package for the following items:
- Black Shark Bkb02 Wireless Gaming Keyboard
- 2.4G Wireless Receiver
- USB Data Cable (USB-C)
- User Manual (this document)
- Shaft Key Puller
- Transparent Keyboard Cover
- Supplementary Keycaps (for "Three-Body" version)
Setup Guide
1. Charging the Keyboard
Before first use, it is recommended to fully charge the keyboard. Connect the supplied USB-C data cable to the keyboard's USB-C port and the other end to a power source (e.g., computer USB port, USB wall adapter).
2. Connecting the Keyboard
The Black Shark Bkb02 supports three connection modes: Wired, 2.4G Wireless, and Bluetooth.
Use the three-stage switch located on the keyboard's side/back to select your desired mode:
- Wired Mode: Slide the switch to the leftmost position. Connect the USB-C data cable directly to your computer.
- Bluetooth Mode: Slide the switch to the middle position.
- On your device (computer, laptop, tablet, phone), enable Bluetooth.
- Search for available Bluetooth devices and select "Black Shark Bkb02" (or similar name).
- Follow any on-screen prompts to complete pairing.
- 2.4G Wireless Mode: Slide the switch to the rightmost position.
- Locate the independent 2.4G receiver (usually stored in a compartment on the keyboard).
- Plug the 2.4G receiver into an available USB port on your computer.
- The keyboard should automatically connect.
The keyboard is compatible with Windows, MacOS, iOS, and Android operating systems.
Operating Instructions
Multifunctional Knob
The knob located on the top right of the keyboard provides quick control over audio settings:
- Rotate Right: Turn up the volume.
- Rotate Left: Turn down the volume.
- Press: Mute/unmute audio.
Function (FN) Key Combinations
Use the FN key in combination with other keys to access various shortcuts and controls:
- FN + F1: Computer screen brightness reduction.
- FN + F2: Computer screen brightness increase.
- FN + F3: Previous track.
- FN + F4: Play/Pause media.
- FN + F5: Next track.
- FN + F6: Mute audio.
- FN + F7: Volume reduction.
- FN + F8: Volume increase.
- FN + ↓ (Down Arrow): Decrease keyboard light brightness.
- FN + ← (Left Arrow): Slow down light speed.
- FN + → (Right Arrow): Speed up light.
- FN + S: Cycle through lamp effect modes.
- FN + Win Key: Lock/unlock the Windows key. The 'M' indicator light below the knob will illuminate when locked.
- FN + Esc (Long Press for 5 seconds): Reset the keyboard to factory settings. Use only if necessary.
- FN + Enter: Toggle keyboard light on/off.
Inductive Magnetic Switches and Stroke Adjustment
The "Tesla" inductor shaft allows for precise stroke adjustment, offering a range of 0.2mm to 3.3mm with 0.1mm accuracy. This feature enables customization for different use cases:
- Lower Trigger Stroke: Ideal for gaming, providing faster trigger speed.
- Higher Trigger Stroke: Suitable for office work, offering a slower trigger speed to prevent accidental presses.
The DKS (Dynamic Key) function further enhances control by allowing different key press and lift states to correspond to different key responses, enabling quick triggers and emergency stops with RT sensitivity as low as 0.1mm.
For detailed customization of key sensitivity, lighting, macro functions, and other parameters, use the Black Shark Exclusive Drive software (available for download from the official Black Shark website).
Maintenance
Cleaning
- Use a soft, lint-free cloth to wipe the keyboard surface.
- For dust and debris between keycaps, use compressed air.
- The PBT keycaps are non-oiling; avoid harsh chemicals that could damage the material or legends.
- Use the provided transparent keyboard cover when not in use to prevent dust accumulation.
Keycap and Switch Replacement (Hot-Swap)
The Black Shark Bkb02 features hot-swappable switches, but it only supports Tesla Inductive switches. Do not attempt to install other types of switches as this may damage the keyboard.
- To remove a keycap, use the provided keycap puller. Gently pull upwards until the keycap detaches.
- To remove a switch, use the provided shaft key puller. Carefully grip the switch and pull it straight up.
- To install a new Tesla Inductive switch, align the pins with the holes on the PCB and press down firmly until it clicks into place.
- To install a new keycap, align it with the switch stem and press down gently.
Battery Care
- Avoid exposing the keyboard to extreme temperatures.
- If storing for a long period, charge the battery to about 50% to prolong its lifespan.
- Use the original USB-C cable for charging.
Troubleshooting
Keyboard Not Responding
- Check Connection: Ensure the keyboard is properly connected in Wired, 2.4G, or Bluetooth mode. Verify the mode switch is in the correct position.
- Battery Level: If in wireless mode, check if the battery is charged. Connect the USB-C cable to charge.
- 2.4G Receiver: For 2.4G mode, ensure the receiver is securely plugged into a USB port and the keyboard is switched to 2.4G mode.
- Bluetooth Pairing: For Bluetooth mode, ensure the keyboard is paired correctly with your device. Try re-pairing if necessary.
- Reset Keyboard: Long press FN + Esc for 5 seconds to reset the keyboard.
RGB Lighting Issues
- Toggle Light: Press FN + Enter to ensure the lighting is not turned off.
- Brightness: Adjust brightness using FN + ↑ (Up Arrow) or FN + ↓ (Down Arrow).
- Light Speed/Mode: Adjust light speed with FN + ← (Left Arrow) / → (Right Arrow) and change modes with FN + S.
- Software: Ensure the Black Shark Exclusive Drive software is installed and updated, and check lighting settings within the software.
Keys Not Registering or Double Typing
- Clean Switches: Remove the keycap and switch (if hot-swappable) and clean any debris.
- Replace Switch: If a specific key continues to malfunction, the switch may be faulty. Replace it with a new Tesla Inductive switch.
- Software Settings: Check the Black Shark Exclusive Drive software for any custom key settings or macros that might be interfering.
Specifications
| Feature | Detail |
|---|---|
| Model | Bkb02 |
| Connection Modes | 2.4G Wireless, Bluetooth Wireless, Wired (USB-C) |
| System Support | Windows, MacOS, iOS, Android |
| Endurance (Battery Life) | 120 hours |
| Weight | 962g |
| Charging Interface | USB-C, supports C-to-C charging |
| Wireless Receiver | Independent 2.4G receiver |
| Switch Type | Tesla Inductive Axis (Magnetic Switch) |
| Key Number | 84 keys + 1 knob key |
| Keycap Material | PBT side through five-sided thermal sublimation |
| Polling Rate | Wired 1kHz |
| Stroke Adjustment Range | 0.2mm - 3.3mm (0.1mm accuracy) |
| Features | Hot-Swap (Tesla Inductive switches only), RGB Lighting, Hard GAS Structure, Dynamic Key (DKS), Quick Trigger (RT) |
Internal Structure Overview
The keyboard features a multi-layered "Hard GAS structure" for enhanced typing feel and sound dampening:
- Key cap
- Luminous logo
- CNC Metal Knob
- Theme Metal Decorative Sheet
- Shaft
- Upper cover
- Magnetic attraction receiver
- Magnetic receiver storage bin
- Positioning plate
- Silencer quilted
- Shaft lower pad
- Motherboard PCB
- Bottom cotton of axle seat
- Battery
- Bottom shell silencing cotton
- Bottom shell
"Tesla" Inductance Axis vs. Magnetic Axis Comparison
| Feature | "Tesla" Inductor Shaft | Magnetic Shaft |
|---|---|---|
| Induction mode | Bidirectional active | One-way passive |
| With or without dead zones | None | None |
| Temperature drift effect | No interference | Interfered |
| Magnetic disturbance | No interference | Interfered |
| Overflow/demagnetization phenomenon | None | There are |
| Scheme power consumption | Low | High |
| Requires frequent manual calibration | No need | Need |
| The same type of shaft hot plug versatility | Strong | Weak |
| Principle | The inductor shaft adopts a bidirectional active mode and the board adopts a chip coil mode. The chip connection coil intelligently transmits and captures the inductive signal and accurately analyzes the signal difference to calculate the displacement change. It can intelligently respond to environmental changes, automatically adjust signal parameters, and continuously maintain top measurement accuracy. | The magnetic shaft adopts one-way sensing mode. The Hall element can only respond to magnetic flux changes and output signals, but does not have the function of intelligent adaptation according to environmental changes. It limits its adaptability and accuracy stability in complex environments. |
| Advantages and disadvantages | The inductor shaft achieves high-precision displacement measurement with a highly integrated chip, a unique aluminum core design to ensure hot-plug accuracy, and a self-calibration mechanism to cope with environmental changes and dimensional tolerances. However, the relatively high cost and technical complexity have certain requirements for its technical innovation capabilities, relatively low power consumption. | The magnetic axis can be matched with different types of Hall devices, providing designers with flexibility to adapt to various application scenarios and performance requirements. However, the magnetic axis control is complex, the induction characteristics between devices are different and sensitive to temperature, and there is temperature drift. The power consumption is relatively large. |
Warranty and Support
For warranty information, technical support, and driver downloads (Black Shark Exclusive Drive software), please visit the official Black Shark website or contact your retailer. Keep your purchase receipt for warranty claims.
Official product video for visual guidance:
User Tips
No specific user tips were available from provided reviews or Q&A. However, here are some general tips for mechanical keyboard users:
- Experiment with Stroke Adjustment: Take time to find your preferred trigger stroke setting using the Black Shark Exclusive Drive software. A lower setting is often preferred for fast-paced gaming, while a slightly higher setting can reduce typos during typing.
- Customize RGB: Explore the various RGB lighting effects and customization options through the software to match your setup or mood.
- Regular Cleaning: Dust and debris can affect switch performance. Regular cleaning with compressed air and a soft brush will keep your keyboard in top condition.
- Secure Wireless Connection: When using 2.4G wireless, ensure the receiver is placed in a clear line of sight to the keyboard to minimize interference.
