SenCiciMen x9

Contents

SenCiciMen x9 Professional 6-in-1 Multi Hair Styler User Manual

Model: x9

Introduction

Thank you for choosing the SenCiciMen x9 Professional 6-in-1 Multi Hair Styler. This versatile tool is designed to dry, curl, and shape hair using the Coanda effect, minimizing extreme heat damage. Please read this manual thoroughly before use to ensure safe and effective operation.

Important Safety Instructions

WARNING:

  • Stay away from pacemakers, defibrillators, credit cards, and electronic storage media.
  • To reduce the risk of fire, electric shock, and injury, always observe basic precautions when using electrical appliances.
  • This product is not intended for use by persons with physical, sensory, or intellectual disabilities, or persons without relevant experience and knowledge (including children), unless supervised or directed by a guardian to ensure safe use.
  • Do not use this product as a toy. Exercise caution when used by or near children.
  • If this product is used in the bathroom, unplug it after use. Proximity to water can be dangerous even when the product is off.
  • Do not use this product in baths, showers, wash basins, or other water containers.
  • If the power cord is damaged, it must be replaced or repaired by the manufacturer, its service agent, or qualified personnel.
  • This product is equipped with a non-self-reset thermal safety cut-off device to prevent overheating. If the product cuts off, pull the plug from the main power socket to allow it to cool.
  • To avoid accidental reset due to hot cut-off, this product must not be powered by external switch devices such as timers or meters. Do not connect it to a circuit that is opened and closed at regular intervals by a utility company, and do not plug into any outlet where the power is unstable or may be turned off.
  • For additional protection, it is recommended that a residual-current device with a rated leakage current not exceeding 3 mA be installed. Seek advice from the installer.
  • Do not use this product for any purpose other than drying and styling hair.
  • Do not touch the plug or any part of the product with wet hands.
  • Do not pull the cable when disconnecting from the power supply. Hold the plug instead of the cable. Extension cables are not recommended.
  • Do not pull or heavily stress the power cord. Keep the power cord away from heated surfaces. Do not wind the power cord around the product.
  • Do not use any lubricants, detergents, polishes, or air fresheners on any parts of this product.
  • If maintenance or repair is required, contact customer service. Do not disassemble the product, as improper disassembly may cause electric shock or fire.
  • If the product does not operate as designed, is severely impacted, falls, or is damaged from a height, or is placed outdoors or in water, do not use it and contact customer service.

Note:

  • The exhaust port and metal ring may become hot during use. Allow them to cool before touching.

Package Contents

Please verify that all components are present in your package. The contents may vary based on the specific package purchased (4PCS or 6PCS).

4PCS Package Content:

  • 1x Hair Styler (Main Unit)
  • 1x 40mm Drum
  • 1x Soft Brush Comb
  • 1x Anti Hair Flying Nozzle
  • 1x 38mm Cylinder Fluffy Comb
  • 1x Anti-scald Silicone Glove

6PCS Package Content:

  • 1x Hair Styler (Main Unit)
  • 1x 30mm Auto Curling Barrel
  • 1x 40mm Auto Curling Barrel
  • 1x Anti Hair Flying Nozzle
  • 1x Soft Smoothing Brush
  • 1x Firm Smoothing Brush
  • 1x 38mm Cylinder Fluffy Comb
  • 1x Anti-scald Silicone Glove

Product Overview and Attachments

The SenCiciMen x9 Multi Hair Styler utilizes the Coanda effect for efficient and gentle styling without extreme heat. It comes with various attachments for different styling needs.

6-in-1 Multi-Styler with various attachments
Overview of the 6-in-1 Multi-Styler and its attachments.

Main Styler Unit

The core unit provides power and airflow control. Its innovative geometric design allows for easy adjustment of airflow pattern, direction, and intensity by gently rotating the drum.

Diagram showing how to rotate the drum to control airflow
Gently rotate the drum to easily control the airflow.

Attachments:

  • 30mm Curling Barrel: Designed for creating small waves. It allows winding more hair for faster styling and can curl in both clockwise and counterclockwise directions without needing to change the barrel.
  • Image showing 30mm and 40mm curling barrels and their results
    30mm Curling Barrel for small waves and 40mm Curling Barrel for big waves.
  • 40mm Curling Barrel: Ideal for creating big waves. Similar to the 30mm barrel, it supports both clockwise and counterclockwise curling directions without requiring a barrel change.
  • Anti-flying and Dry Hair Nozzle: A multi-functional attachment for quick drying, smoothing, and reducing flyaways. It uses concentrated DC airflow for fast drying and the Coanda effect to minimize frizz, resulting in smooth, straight hair.
  • Diagram illustrating correct and incorrect usage of the anti-flying nozzle
    Correct and incorrect positioning for the anti-flying and dry hair nozzle.
  • Soft Smooth Comb: Features redesigned adjustable comb teeth for flexible styling and enhanced control, allowing for various shaping methods.
  • Image showing soft and hard smooth combs with adjustable teeth
    Adjustable comb teeth on the Soft Smooth Comb and Hard Smooth Comb.
  • Firm Smooth Comb: Provides firmer control for smoothing and shaping hair, similar to the soft comb but with a more rigid structure.
  • 38mm Cylindrical Fluffy Comb: Use this cylindrical comb to wrap hair around and create a fluffy, voluminous effect.
  • Hot Air Brush smoothing out frizz
    Hot Air Brush attachment for smoothing out frizz.

Setup

  1. Attaching Accessories: Align the desired attachment with the main styler unit and twist gently until it clicks securely into place. Ensure it is firmly fastened before use.
  2. Detaching Accessories: Twist the attachment in the opposite direction and pull to remove it from the main unit.

Operating Instructions

  1. Power On/Off: Use the power switch located on the main unit to turn the device on or off.
  2. Temperature Settings: Select from High, Medium, or Cold Air settings based on your hair type and desired styling outcome.
  3. Speed Settings: Adjust the airflow speed to Fast, Medium, or Mild according to your preference.
  4. One-Click Cold Air: Activate the cold air function with a single click to set your style and add shine.
  5. Using Curling Barrels (30mm/40mm): The curling barrels utilize the Coanda effect to attract and wrap hair, creating curls and waves. Position the barrel near a section of hair, and the air will automatically wrap the hair around it. The barrels are designed to work in both clockwise and counterclockwise directions without needing to swap attachments.
  6. Using Smooth Combs (Soft/Firm): For straightening and smoothing, attach the desired comb. The adjustable teeth allow for flexible styling. Guide the comb through sections of damp hair to dry and smooth simultaneously.
  7. Using Anti-flying and Dry Hair Nozzle: For quick drying, use the concentrated DC airflow. For smoothing and reducing flyaways, switch to smooth mode, which uses the Coanda effect to direct air and create a sleek finish. Ensure the nozzle is positioned correctly to avoid blocking the vent.
  8. Using 38mm Cylindrical Fluffy Comb: For adding volume and a fluffy effect, wrap sections of hair around the cylindrical comb and apply heat.

Maintenance

Cleaning the Filter:

Regular cleaning of the filter is essential for maintaining optimal performance and preventing overheating. It is recommended to clean the filter once a week to once a month, depending on usage.

  1. Slide the detachable strainer down the handle of the main unit. Note: The filter cannot be entirely removed due to its connection with the power cord.
  2. Use a soft brush or flannelette cloth to gently remove any accumulated dust and debris from the filter screen.
  3. Clean the filter hood using a lint-free cloth or soft brush to remove dust and debris.
  4. Once the strainer is clean, re-install it by aligning the red dot on the filter with the white dot on the handle and pressing the two parts together until they click into place.

Troubleshooting

  • Overheating: If the product suddenly stops operating, it may have activated its thermal safety cut-off due to overheating. Unplug the device immediately and allow it to cool down completely before attempting to use it again.
  • Blockage of Vent: Ensure that the anti-flying and dry hair nozzle is attached correctly and that the airflow arrow is not pointing in the wrong direction. Incorrect positioning can lead to vent blockage and prevent the device from functioning normally. Refer to the diagram in the 'Attachments and Functions' section for correct usage.
  • General Malfunction: If the product does not operate as designed, has been severely impacted, dropped, or damaged, discontinue use immediately and contact customer service for assistance. Do not attempt to repair the device yourself.

Specifications

FeatureSpecification
Brand NameSenCiciMen
Model Numberx9
Item TypeHair Dryer
Max. Power1300W
Motor Speed11000rpm
Voltage210-240V (EU/UK/KR Plug), 110V (US Plug)
Power SourceElectric
Plug StandardEU, UK, KR (220V); US (110V)
MaterialABS
Heating ElementCeramic
Nozzle CoatingCERAMICS
Type of MotorDC
Nozzle TypeAir collecting & scattering
Number of NozzlesOver 5
Number of Heating ModesOver 3 (High, Medium, Cold Air)
Number of Gears≥ 5 (Fast, Medium, Mild)
FunctionAnion, Thermostatic, Hot/cold air, Temperature control, diffuser
PortabilityUnfoldable handle
Included ComponentsComb (various attachments)
High-concerned chemicalNone

User Tips

  • Voltage Compatibility: Always ensure your power outlet voltage matches the device's requirements. The product is available in 220V versions (for EU/UK/KR plugs) and 110V versions (for US plugs). Confirm your specific model's voltage to prevent damage.
  • Attachment Usage: The curling barrels are designed to work in both directions (clockwise and counterclockwise) without needing to swap attachments, simplifying the styling process. Experiment with both directions for varied curl patterns.
  • Filter Cleaning: Regular cleaning of the detachable filter cover is crucial for maintaining optimal airflow, preventing overheating, and prolonging the lifespan of your styler. Adhere to the recommended cleaning schedule.
  • Coanda Effect: To best utilize the Coanda effect for curling, ensure your hair is damp, not soaking wet. The airflow will gently attract and wrap your hair around the barrel.

Warranty and Support

Your SenCiciMen x9 Multi Hair Styler comes with a 1-year warranty from the date of purchase, covering spare parts (excluding the filter) and manual warranty service. This warranty is valid only if the product is used in the country of sale.

Warranty Coverage:

If defects in material, manufacture, or function are found within 1 year of purchase or delivery, the product will be maintained or replaced (at the supplier's option). Any replacement parts will be owned by the supplier. Maintenance or replacement within the warranty period does not extend the product warranty period.

Exclusions from Warranty:

  • Failure to perform recommended product maintenance.
  • Accidental damage or failure due to careless misuse, negligence, rude operation, or any violation of the operation manual.
  • Use of the product for any purpose other than a hair dryer/styler.
  • Parts not assembled or installed according to instructions.
  • Installation errors (except for vendor-installed).
  • Maintenance or alteration not performed by the original manufacturer or its authorized agent.
  • Normal wear and tear (e.g., fuses).

For any questions regarding the scope of the warranty, repair needs, or general support, please contact customer service. Most queries can be handled online by trained staff.

A detailed user manual is also available in PDF format for download or viewing: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.