CYCPLUS Z3 Bike Computer Mount Instruction Manual

1. Product Overview

The CYCPLUS Z3 is a lightweight and sturdy aluminium alloy bracket designed for integrated handlebars, providing a secure and centered mounting solution for your bike computer, bike lights, and sports cameras. Its design aims to enhance viewing comfort and road riding safety.

Figure 1: CYCPLUS Z3 Bike Computer Mount

The ZD1 is an optional expansion bracket (sold separately) that can be used in conjunction with the Z3 to mount additional accessories.

2. Specifications

Figure 2: Z3 Product Dimensions

Figure 3: ZD1 Expansion Bracket Dimensions and Packing List

3. Installation Guide

Follow these steps to install your CYCPLUS Z3 bracket and attach accessories.

3.1 Z3 Bracket Installation

1. Position the Z3: Mount the Z3 bracket with its attachment points aligned to the integrated handlebar's screw holes.
2. Adjust and Secure: Remove the existing integrated handlebar screw(s) if necessary. Adjust the bracket's position for optimal viewing. Insert the provided M5 screw(s) into the holes and tighten them securely using the 3mm hexagonal wrench. Prioritize using the handlebar's integrated screws if available.
3. Attach Device: Once the Z3 is securely mounted, snap your compatible bike computer, bike light, or action camera into the designated mount.

Figure 4: Detailed Z3 Installation Steps

3.2 ZD1 Expansion Bracket Installation (Optional)

The ZD1 expansion bracket (sold separately) allows for mounting additional accessories like bike lights or action cameras.

1. Attach ZD1 to Z3: Align the ZD1 expansion bracket with the hanging points on the underside of the Z3 main bracket.
2. Secure ZD1: Use the provided M5 screws and 3mm hexagonal wrench to securely fasten the ZD1 to the Z3.
3. Mount Accessories: Attach your bike light or action camera to the ZD1's mounting points.

Figure 5: Z3 with ZD1 showing two hanging points for accessories

• The front hanging point is recommended for sports cameras, offering a wider field of view.
• The middle hanging point provides higher strength and stability, recommended for bike lights or flashlights.
• If using both a camera and a bike light, it is recommended to pair them with the ZD1 extension bracket.

4. Operation

The CYCPLUS Z3 mount is designed for straightforward attachment and detachment of your cycling accessories.

• Attaching Devices: Gently align your compatible bike computer, bike light, or action camera with the corresponding mount on the Z3 or ZD1 bracket. Press firmly until it clicks into place, ensuring a secure fit.
• Detaching Devices: To remove a device, typically a quarter-turn or a release mechanism (depending on the device) will allow it to be detached from the mount.

Figure 6: Attaching a bike computer

Figure 7: Bike light mounted on Z3

Figure 8: Action camera mounted on Z3

The centered design of the mount positions your devices optimally for comfortable viewing and easier operation, enhancing road riding safety.

Figure 9: Centered design for comfortable riding

5. Maintenance

To ensure the longevity and optimal performance of your CYCPLUS Z3 mount, follow these simple maintenance guidelines:

• Cleaning: Wipe the mount regularly with a soft, damp cloth to remove dust, dirt, and sweat. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or material.
• Screw Tightness: Periodically check all screws (especially those securing the mount to the handlebar and the ZD1 expansion bracket, if used) to ensure they remain tight. Loose screws can lead to instability or loss of accessories during rides.
• Inspection: Inspect the aluminium alloy and nylon reinforced fiberglass components for any signs of wear, cracks, or damage. If any damage is observed, discontinue use and consider replacement.
• Storage: When not in use for extended periods, store the mount in a clean, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

• Mount feels loose or unstable:
  • Ensure all screws securing the Z3 to the handlebar are tightened properly.
  • Verify that the Z3 is compatible with your specific integrated handlebar model and that the screw hole distance matches the 30mm requirement.
• Device (computer, light, camera) does not fit or is loose on the mount:
  • Confirm that your device uses a compatible Garmin-style quarter-turn mount or a standard action camera/bike light interface.
  • Ensure the device is correctly aligned and fully clicked into place.
• Cannot install the Z3 bracket on my handlebar:
  • The Z3 is designed for most integrated handlebars. It is NOT suitable for round tube handlebars or split handlebars. Refer to Figure 10 for visual guidance.
  • Check the center distance of your handlebar's screw holes; it must be compatible with the 30mm spacing of the Z3.

Figure 10: Handlebar Compatibility

7. User Tips

• Check Handlebar Type: Before purchasing, always verify that your bicycle has an integrated handlebar with compatible screw hole spacing (30mm center distance) to ensure proper fitment.
• Optimal Accessory Placement: For best results when using the ZD1 expansion bracket, consider mounting your action camera on the front hanging point for a wider view and your bike light on the middle hanging point for enhanced stability.
• Secure Fastening: Always ensure all screws are tightened firmly but do not overtighten to avoid stripping threads. A snug fit is sufficient to prevent movement.

8. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the manufacturer or the seller directly through their official channels. Keep your purchase receipt as proof of purchase.