Manuals+

Xnbada WS2811 COB RGBCW

WS2811 FCOB SPI RGBCCT LED Light Strip Instruction Manual

Model: WS2811 COB RGBCW

Important Safety Instructions

⚠ DANGER

Please note that this product cannot be directly connected to AC voltage of 110V or 220V. The voltage must be reduced to the required DC voltage for the light strip through a transformer.

⚠ CAUTION

This Bag Contains Moisture and Electrostatic Sensitive Devices.

  1. Storage Temperature: -40~+80℃, Operating Temperature: -25~+60°C.
  2. Installation surface must be Smooth, Clean and Dry.
  3. The Part of LED Components can not be fixed on the Surface of the Sharp edge.
  4. Strip Should not be collided or crushed.
  5. Strip can be cut following the cutting lines.

⚠ WARNING

TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAY PENS. THIS BAG IS NOT A TOY.

The packaging materials need to be separated and placed in the classified garbage bin.

Specifications

Feature Detail
Input Voltage DC24V
IC Type FCOB RGBCCT WS2811 IC
Theoretical Power 29W/m
FPCB Width 12mm
LED Quantity 840 LEDs/M
IC Quantity 24 ICs/M
Cutting Length Every 70 LEDs
Individually Addressable Every 70 LEDs can be uniquely controlled
Color Rendering Index (CRI) Ra＞90
Operation Temperature -20℃ to +45℃
Storage Temperature -20℃ to +60℃
View Angle 180°
Luminous Flux 249-2000 (units not specified, likely Lumens)
Power Generation Switch
Is Batteries Included No
Nominal Voltage 24V
LED Chip Model SMD5050
Average Life (hrs) More than 50000 hours
Certification CCC, CE, FCC
Power Source DC
Origin Mainland China
Strip type COB
Power Consumption (W/m) 11.52W/m
Occasion LIVING ROOM
LEDs Number/M 840
LED Chip Brand Epistar
Waterproof No
Color Temp(K) RGB+CCT

Package Contents

  • 1 * FCOB 840Leds/m RGBCCT IC LED Strip

Note: Power Supply and Controller are not included and must be purchased separately.

Setup Instructions

To ensure proper functionality and safety, please follow these steps carefully:

  1. **Prepare Components:** To operate the LED strip, you must have a compatible LED Controller and a suitable LED Power Supply. These are sold separately.
  2. **Voltage Matching:** Ensure the voltage of your LED Power Supply matches the required voltage of the LED strip. For this DC24V LED strip, a 24V LED Power Supply is required. Using an incorrect voltage can damage the strip.
  3. **Connect LED Strip to Controller:** Connect the LED strip to the LED Controller. Pay close attention to the data input and power connections.
    Diagram showing LED strip connections to a female connector with WS2811 IC, voltage adding wire, cuttable points, and data direction.
    Figure 1: LED Strip Connection Diagram. Note the WS2811 IC, voltage adding wire, cuttable sections, and data flow direction indicated by arrows.
    Wiring diagram showing a controller connected to a power supply and multiple LED strips. It illustrates both parallel and series connections for power distribution.
    Figure 2: Example Wiring Diagram for LED Strip System. This diagram shows how to connect the LED strip to a controller and power supply, including options for distributing power to multiple segments.
  4. **Connect Power Supply to Controller:** Finally, connect the LED Power Supply to the LED Controller.
  5. **Installation Surface:** Ensure the installation surface is smooth, clean, and dry for optimal adhesion of the double-sided tape.
    Images showing the flexibility of the LED strip, its cuttable sections, and the double-sided tape for installation.
    Figure 3: Installation Features. The LED strip is flexible, cuttable at marked points, and features strong double-sided tape for easy installation.
  6. **Cutting the Strip:** The LED strip can be cut along the designated cutting lines. Ensure to cut only at these marked points to avoid damaging the circuit. The remaining part of the LED strip can still function normally.

Operating Instructions

Once properly installed and connected, the LED strip can be operated via its compatible controller. The WS2811 IC allows for individual addressability, enabling a wide range of dynamic lighting effects.

  • **Power On/Off:** Use the controller to turn the LED strip on or off.
  • **Color and Brightness Adjustment:** Adjust colors, brightness, and color temperature (RGB+CCT) using the controller.
    Images showing the LED strip displaying various colors including RGB, cool white (CW), and warm white (WW).
    Figure 4: Color and Temperature Blending. The strip supports RGB, Cool White (CW), and Warm White (WW) for a perfect blend of color and temperature.
  • **Dynamic Effects:** Utilize the controller's features to activate various dynamic lighting effects, including dream color patterns and music synchronization (requires a controller with music sync function).
    Video 1: Dynamic Lighting Effects. This video demonstrates the various color changes and dynamic patterns achievable with the WS2811 RGBCCT LED strip.
    Image of two people playing guitars with LED strip lights in the background, illustrating music synchronization.
    Figure 5: Music Synchronization. The lights can follow the music, flickering and changing with the rhythm (requires a compatible controller).
  • **Controller Compatibility:** The strip supports multiple controllers for advanced programming and effects, such as SP63AE, SP108E, K-1000C, Arduino Uno, and Raspberry Pi.
    Image showing various compatible controllers for the LED strip, including SP63AE, SP108E, K-1000C, Arduino Uno, and Raspberry Pi.
    Figure 6: Compatible Controllers. The LED strip supports various controllers for advanced customization and programming.

Maintenance

  • **Cleaning:** Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
  • **Inspection:** Periodically inspect the strip for any signs of damage, loose connections, or wear.
  • **Avoid Moisture:** As the strip is not waterproof, ensure it is kept away from moisture and liquids.
  • **Temperature Control:** Operate and store the strip within the specified temperature ranges to prolong its lifespan.

Troubleshooting

LED strip does not light up:
  • Check if the power supply is correctly connected and providing the correct DC24V output.
  • Ensure the LED controller is properly connected to both the power supply and the LED strip.
  • Verify that the data input and power wires are connected to the correct terminals on the strip and controller.
  • Confirm that the controller is powered on and sending signals.
Incorrect colors or flickering:
  • Check the data connection between the controller and the LED strip. A loose connection can cause erratic behavior.
  • Ensure the controller's settings match the WS2811 IC type and the number of LEDs/ICs.
  • Insufficient power supply can cause flickering or incorrect colors, especially over longer runs. Consider adding voltage injection points or a more powerful supply.
Part of the strip is not working:
  • If a segment of the strip is not lighting up, it might be due to a cut made outside the designated cutting lines or physical damage.
  • Check for any visible damage to the FPCB (Flexible Printed Circuit Board) or individual LEDs.
  • Remember that every 0.5 meter may have solder joints, which is normal and not a quality problem.

User Tips

  • For longer installations, consider using power injection at multiple points along the strip to maintain consistent brightness and color accuracy.
  • Experiment with different controllers to unlock the full potential of the addressable RGB+CCT features.
  • Plan your installation carefully, measuring and cutting the strip to the desired lengths before final adhesion.
  • Always test the LED strip and controller setup before permanently mounting to ensure all components are working as expected.

Warranty and Support

For any issues or questions regarding your WS2811 FCOB SPI RGBCCT LED Light Strip, please contact the seller or manufacturer for support. Keep your purchase receipt as proof of purchase for any warranty claims.

A detailed user manual in PDF format is available for download. You can access it via the following link: User Manual (PDF)