1. Product Overview
The AZDOME Hardwire Kit OBD is designed to provide continuous power to your dash cam and other compatible devices directly from your vehicle's OBD port. It enables 24-hour parking monitoring, offers multiple protection features, and ensures easy, non-destructive installation.

Key Features:
- 24H Parking Monitoring: Enables automatic time-lapse recording and emergency video saving upon collision detection when the vehicle is off.
- Intelligent Recognition of Auto Start-Stop: Prevents accidental activation of parking monitoring during temporary stops.
- Efficient Power Output: Delivers a maximum output current of 2.5A, compatible with various devices.
- Low Voltage Monitoring: Automatically stops drawing power from the battery if voltage drops below 11.8V ± 0.2V to prevent over-discharge.
- Quick Installation: Plug-and-play setup without additional settings.

Multiple Protection Features:

2. Specifications

| Parameter | Value |
|---|---|
| Brand | AZDOME |
| Input Voltage | 12V-24V (Not applicable to heavy trucks) |
| Output Voltage | 5V |
| Maximum Output Current | 2.5A |
| Low Voltage Protection Voltage | 11.8V ± 0.2V |
| Length | 11.48ft / 3.5m |
Available Port Types:
- OBD01: Type C Port
- OBD02: Mini USB Port
- OBD03: Micro USB Port
Please ensure the selected hardwire kit matches the port type of your dash cam or other device.
3. Setup and Installation
This section provides a general guide for installing the AZDOME Hardwire Kit OBD. For a visual demonstration, please refer to the installation video below.
Installation Steps:
- Wiring: Carefully route the cable from your dash cam to the OBD port. Use a pry tool to tuck the cable along the headliner and A-pillar for a clean, hidden installation.
- Locate the OBD Interface: The OBD interface is typically located in the lower left corner of the steering wheel area. Refer to your vehicle's user manual for the exact location.
- Connect the OBD Cable: Plug the hardwire kit's OBD connector into your vehicle's OBD port.
- Connect to Dash Cam: Plug the appropriate USB connector (Type C, Micro USB, or Mini USB) into your dash cam.

Common OBD Port Locations:

- Area A: Most models from General Motors, Volkswagen, Ford, Toyota, Hyundai, Citroën, and many others.
- Area B: Honda Volkswagen Touran, imported Lexus, and similar models.
- Area C: A few models from Dongfeng Citroën, Dongfeng Peugeot, and others.
- Area D: A few models from Dongfeng Citroën.
- Area E: Very few models from other manufacturers.
Note: OBD interface locations may vary slightly by vehicle model and production year. Consult your vehicle's user manual or a professional technician for precise information.
4. Operating Instructions
24H Parking Monitoring:
Once installed, the hardwire kit enables your dash cam to automatically enter parking monitoring mode after your vehicle is turned off. This typically activates approximately 3 minutes after the vehicle is completely shut down, allowing the OBD interface to detect the ignition status as 'off'. In this mode, the dash cam will record continuously (e.g., time-lapse) or activate upon collision detection, saving emergency video footage.
Low Voltage Protection:
The kit continuously monitors your car battery's voltage. If the voltage drops below 11.8V ± 0.2V, the hardwire kit will automatically cut off power to the dash cam to prevent excessive discharge and ensure your vehicle can start.
Intelligent Auto Start-Stop Recognition:
The hardwire kit intelligently recognizes your vehicle's auto start-stop function, preventing the dash cam from entering parking monitoring mode during brief stops (e.g., at traffic lights), thus avoiding unnecessary recordings and alerts.
5. Maintenance
- Regular Checks: Periodically check the cable connections to ensure they are secure and free from damage.
- Cleaning: Keep the OBD port and cable connectors clean and free of dust or debris.
- Software Updates: Ensure your dash cam's firmware is up to date for optimal performance with the hardwire kit.
6. Troubleshooting
Q: Does my car have an OBD interface? What if it doesn't fit?
A: All passenger cars are equipped with an OBD interface, typically located in the lower left corner of the steering wheel. The OBD interface follows a global standardized protocol, so compatibility issues are rare.
Q: Will using this OBD cable drain my car battery?
A: The OBD cable has minimal power consumption in the static state (only a few microamps). It includes low voltage monitoring that automatically stops drawing power if the battery voltage drops below 11.8V ± 0.2V, protecting your battery from excessive discharge.
Q: How long does it take for parking monitoring to activate after the vehicle is turned off?
A: It takes approximately 3 minutes. After the vehicle is completely turned off for 3 minutes, the OBD interface detects the ignition status as 'off' and sends a signal to activate the parking monitoring function of the dash cam.
Q: Dash cam not turning on or losing power.
- Check all connections to ensure they are secure.
- Verify that the OBD port in your vehicle is functioning correctly.
- Ensure the hardwire kit's port type matches your dash cam.
7. User Tips
- This hardwire kit is generally considered very convenient and easier to install than traditional fuse box connections.
- Some users have noted that the low voltage cut-off might occur at 12V rather than the stated 11.8V.
- Consider purchasing an OBD2 Y-splitter if you frequently need to use the OBD port for diagnostics in a workshop, allowing both the camera and diagnostic tools to be connected simultaneously.
- The kit has been reported to work well with various dash cam brands beyond AZDOME, such as Wolfbox G840s and DDPAI, provided the port type matches.
8. Warranty and Support
For detailed warranty information and customer support, please refer to the official AZDOME website or contact the manufacturer directly.
A user manual in PDF format is available for download: AZDOME Hardwire Kit User Manual (PDF)
Manufacturer: Shenzhen Lingdu Auto Eletronics Co., Ltd
Website: www.azdome.hk
Email: info@dome.hk