POSEIDON Wireless Tattoo Pen Kit User Manual

1. Introduction

Thank you for choosing the POSEIDON Wireless Tattoo Pen Kit. This manual provides essential information for the safe and effective use of your new tattoo pen. Please read it thoroughly before operation and keep it for future reference.

The POSEIDON Wireless Tattoo Pen is designed for embroidery tattoos, offering quiet stability, a strong motor, and precise needle control. Its ergonomic design ensures comfort during extended use.

2. Safety Information

General Safety Warnings

Always ensure the appliance is clean and sterilized before and after each use to prevent contamination.
Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
Keep the device away from water or other liquids. Do not operate with wet hands.
Use only original or approved accessories and power adapters.
Avoid dropping the device or subjecting it to strong impacts.

Child Safety

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Electrical Safety

The appliance must only be supplied at safety extra-low voltage corresponding to the marking on it.

Packaging Warning

WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAY PENS. THIS BAG IS NOT A TOY.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact customer support.

Tattoo Pen *1
Poseidon Tattoo Cartridge Needles *10 (1205RL/5PCS + 1007CM/5PCS)
5cm Black Bandage*1
Tattoo Clean Pad*4
Tattoo Transfer Paper*4
Tattoo practice leather*1
Tattoo ink cup *20

Full kit contents including tattoo pen, needles, ink, and accessories (Red SKU variant) — Figure 3.1: Example of the full kit contents (Red SKU variant).

Full kit contents including tattoo pen, needles, and accessories (Black SKU variant) — Figure 3.2: Example of the full kit contents (Black SKU variant).

4. Specifications

Functional Specifications

Type-C charging port
On-off switch
Supply voltage display
Tension reduction
Function keys (M)
Duration of use tracking
Tension and relaxation control
Hub movement control

Technical Parameters

Feature	Specification
Model	HM138
Frame Material	Aerospace-grade aluminium alloy
Technology	Five-axis precision CNC machining
Battery	2300 mA (1500mAh)
Motor	Japanese motor, 8V/8000 U/min (8500Rpm)
Principle	Direct-drive long-axis
Hub	4.0 mm
Needle Length	1 mm - 4.2 mm
Voltage Range	4-12 V (Default 8V)
Starting Voltage	8V
Working Frequency	10000RPM
Grip Distance	42 mm
Charge Time	2 - 3 hours
Working Duration	4 - 6 hours
Kit Weight	Approx. 700g

POSEIDON Tattoo Pen Kit highlighting motor speed, stroke length, and working voltage — Figure 4.1: Tattoo Pen Kit with key specifications.

Detailed dimensions and specifications for the battery and tattoo pen — Figure 4.2: Dimensions and technical details of the tattoo pen and battery.

Battery charging and working time information — Figure 4.3: Battery performance overview.

5. Setup and Assembly

Initial Charging

Before first use, fully charge the tattoo pen. Connect the Type-C charging cable to the charging port on the device and a suitable power source. The display will show a charging symbol. A full charge typically takes 2-3 hours.

Assembling the Tattoo Pen

Ensure the tattoo pen is turned off.
Carefully insert a compatible cartridge needle into the pen. The aluminum alloy protective layer at the interface ensures a tight and wear-resistant connection.
Twist the needle cartridge clockwise until it is securely in place.
Adjust the needle length by rotating the grip of the pen.

Video 5.1: Product demonstration showing unboxing, assembly, power on/off, voltage adjustment, and operation.

Close-up of the purple tattoo pen, showing the display and controls — Figure 5.2: Close-up of the tattoo pen display and controls.

6. Operation

Power On/Off

To turn on: Press and hold the power button for 1.5 seconds.
To turn off: Press and hold the power button for 1.5 seconds.

Start/Pause Operation

After powering on, press the power button to activate the motor and start tattooing. The display will show the battery status.
Press the power button again to pause the operation.
Press the power button once more to resume operation.

Voltage Adjustment

Use the '+' and '-' buttons to adjust the voltage. Each press changes the voltage by +/-0.1V.
Press and hold the '+' or '-' button for continuous voltage adjustment.
The voltage range is 4.0V to 12.0V. The default starting voltage is 8V.

Strong Start Mode

After starting the machine, double-click the power button to activate the strong start mode.
In this mode, the machine will operate at its highest speed for 0.5 seconds, then automatically return to the previously set voltage.

Memory Function

The device retains the last active mode and voltage setting when powered off and will restore them upon the next power-on.

Display and Sleep Mode

The display will automatically turn off after 10 seconds of inactivity to conserve battery.
The device will enter sleep mode after 5 minutes of inactivity.

Low Battery Warning

When the battery voltage drops to 7.9V, the battery status symbol on the display will blink as a reminder to recharge.

Timing Function

The device tracks the duration of use while the motor is running. This timing pauses when the machine is paused and resets when the power button is pressed to pause.

Function Keys (M Button)

The 'M' function button allows selection between two options (e.g., needle length adjustment or frequency adjustment).
After pressing the 'M' button, the corresponding setting will be displayed. Use the '+' and '-' buttons to adjust the value.
To exit the setting, press the power button.
Hold the 'M' button for 5 seconds for automatic setup.

Clamping Mode

Press the 'M' function button to toggle between clamping mode and normal mode.
In clamping mode, use the '+' and '-' buttons to set the clamping frequency (e.g., 20NPS10HZ).
Hold the 'M' button for 5 seconds for automatic setup in clamping mode.

Hand in black glove using the tattoo pen on practice leather — Figure 6.1: Demonstrating the tattoo pen in use on practice skin.

7. Maintenance and Care

Cleaning

Always disconnect the power and remove the needle cartridge before cleaning.
Wipe the exterior of the tattoo pen with a soft, damp cloth. For sterilization, use an approved disinfectant wipe.
Do not immerse the device in water or any cleaning solutions.
Ensure all parts are completely dry before reassembly or storage.

Storage

Store the tattoo pen and accessories in a clean, dry place, away from direct sunlight and extreme temperatures.
Keep out of reach of children.

8. Troubleshooting

If you encounter any issues, please refer to the following common problems and solutions:

Error Code / Symptom	Description	Possible Cause	Solution
E1	Motor lock / Overload protection activated	Motor is jammed or under excessive load.	Check for obstructions in the needle mechanism. Reduce pressure during operation. Restart the machine.
E2	Overcurrent protection activated	Excessive current draw, possibly due to a short circuit or component failure.	Turn off the device immediately. Do not attempt to restart. Contact customer support.
Battery status blinks at 7.9V	Low battery warning	Battery charge is low.	Recharge the device using the provided Type-C cable.
Device enters sleep mode unexpectedly	Automatic sleep mode activated	No activity for 5 minutes.	Press the power button to wake the device.

If the problem persists after attempting these solutions, please contact customer support for further assistance.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact the POSEIDON Tattoo Equipment Store directly. Keep your purchase receipt as proof of purchase.

User manual (PDF) can be found at: https://manuals.plus/m/812d73ce8de7411ea04056c78c08132ddab584756abb00483df39a4df184fa4f

Poseidon HM138