1. Introduction
Thank you for choosing the JENABOM 3.6V Cordless Screwdriver. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.
1.1 Safety Information
- Always wear appropriate personal protective equipment, such as safety glasses, when operating the screwdriver.
- Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
- Avoid accidental starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
2. Package Contents
Your JENABOM Cordless Screwdriver package may include the following items, depending on the set purchased (14pcs, 26pcs, or 47pcs):
- JENABOM 3.6V Cordless Screwdriver
- USB Charging Cable
- Carrying Case
- Various Screwdriver Bits (Phillips, Flathead, Torx, Hex, etc.)
- Drill Bits (for 26pcs/47pcs sets)
- Sockets (for 47pcs set)
- Flexible Shaft Extension (for 26pcs/47pcs sets)

Figure 2.1: Cordless Screwdriver with various set configurations.

Figure 2.2: Comprehensive view of the accessory set.
3. Product Overview
Familiarize yourself with the components of your JENABOM Cordless Screwdriver:

Figure 3.1: Labeled diagram of the screwdriver components.
- Durable Chuck: Holds screwdriver bits and drill bits securely.
- LED Headlamp: Illuminates the work area for better visibility.
- Rotary Switch: Used to select the operating mode or lock the tool.
- Positive and Negative Switch: Controls the rotation direction (forward/reverse).
- Switch Button: Activates the screwdriver.
- Handle: Ergonomically designed for comfortable grip.
- Pilot Lamp: Indicates power status or charging status.
4. Setup
4.1 Initial Charging
Before first use, fully charge the screwdriver's internal battery. Connect the provided USB charging cable to the screwdriver's USB port and to a compatible USB power source (e.g., wall adapter, laptop, car charger, power bank). The pilot lamp will indicate charging status and turn off or change color when fully charged.

Figure 4.1: USB fast charging options.
4.2 Handle Rotation
The screwdriver features a rotating handle for versatile use in different spaces. To switch between the straight grip and grab grip (pistol grip):
- Locate the "PUSH" button on the side of the screwdriver.
- Press and hold the "PUSH" button.
- Rotate the fuselage of the screwdriver to your desired grip position.
- Release the "PUSH" button to lock the handle in place.

Figure 4.2: Handle rotation mechanism.
4.3 Bit Installation
To install a screwdriver bit or drill bit:
- Ensure the screwdriver is off and the positive/negative switch is in the neutral (locked) position.
- Insert the desired bit into the durable chuck until it clicks into place.
- Pull gently on the bit to ensure it is securely seated.
To remove a bit, pull the chuck collar forward and pull the bit out.
5. Operating Instructions
5.1 Basic Operation
- Select Direction: Use the positive and negative switch to select forward (for driving screws) or reverse (for removing screws). The middle position locks the tool.
- Position Tool: Place the bit onto the screw head or drilling point.
- Activate: Press the switch button to start the screwdriver. The LED headlamp will automatically illuminate the work area.
- Control Speed: The screwdriver operates at a fixed speed of 200 RPM. Apply steady pressure.
- Deactivate: Release the switch button to stop the screwdriver.

Figure 5.1: Screwdriver in use.
5.2 Using the Flexible Shaft Extension
For reaching screws in tight or awkward spaces, attach the flexible shaft extension:
- Install the flexible shaft into the screwdriver's chuck as you would a regular bit.
- Insert the desired screwdriver bit into the end of the flexible shaft.
- Maneuver the flexible shaft to access the screw.
- Operate the screwdriver as usual.

Figure 5.2: Using the flexible shaft extension.
6. Maintenance
6.1 Cleaning
- Always disconnect the screwdriver from any charging source before cleaning.
- Use a soft, damp cloth to wipe down the exterior of the tool. Do not use harsh chemicals or abrasive cleaners.
- Keep the ventilation openings clear of dust and debris to prevent overheating.
- Clean the chuck regularly to ensure proper bit seating.
6.2 Storage
- Store the screwdriver and its accessories in the provided carrying case in a dry, cool place, away from direct sunlight and moisture.
- Ensure the battery is partially charged (around 50%) before long-term storage to prolong battery life.
- Keep out of reach of children.
6.3 Battery Care
- Do not expose the battery to extreme temperatures.
- Avoid fully discharging the battery frequently.
- Recharge the battery when its performance noticeably decreases.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Screwdriver does not turn on. | Battery is discharged. Direction switch is in the locked (middle) position. | Charge the battery. Move the direction switch to forward or reverse. |
| Insufficient power/slow operation. | Low battery charge. | Recharge the battery fully. |
| Bit slips or strips screw head. | Incorrect bit size for screw. Bit not fully inserted into chuck. Excessive pressure. | Use the correct size and type of bit. Ensure the bit is securely seated in the chuck. Apply steady, moderate pressure. |
| Handle does not lock in position. | "PUSH" button not fully released. | Ensure the "PUSH" button is fully released after rotating the handle. |
8. Specifications

Figure 8.1: Key features of the JENABOM Cordless Screwdriver.
| Feature | Specification |
|---|---|
| Brand | JENABOM |
| Type | Cordless Screwdriver |
| Rated Voltage | 3.6V |
| Battery Capacity | 1800mAh (Li-ion) |
| Power Source | Battery |
| Motor Type | Brushless |
| Max. Torque | 3.5 N.m |
| No-load Speed | 200 RPM |
| Charging | USB Fast Charging |
| Features | LED Light, Rotation Handle, Durable Chuck, Positive/Negative Switch |
| Use | Home DIY |
| Screwdriver Length | Approx. 17 cm / 6.69 in |
| Package Weight | 0.584 kg |
| Package Dimensions (L x W x H) | 17 cm x 14 cm x 6 cm |

Figure 8.2: Screwdriver dimensions and speed.
9. User Tips
- Match the Bit: Always use the correct size and type of screwdriver bit for the screw head to prevent stripping the screw or damaging the bit.
- Pre-drill for Hard Materials: When working with harder woods or materials, consider pre-drilling a pilot hole to make driving screws easier and prevent wood splitting.
- Battery Life: For optimal battery longevity, avoid storing the screwdriver in extremely hot or cold environments. Charge it regularly, but avoid leaving it on the charger indefinitely once full.
- Flexible Shaft Use: The flexible shaft is excellent for tight spots, but remember it may reduce torque slightly. For very stubborn screws, use the screwdriver directly.
10. Warranty and Support
Your JENABOM Cordless Screwdriver is designed for reliability and performance. For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for warranty validation.