Ainavi SW-10

Contents

AINAVI SW-10 800W 10-Inch Slim Under-Seat Active Car Subwoofer Instruction Manual

Model: SW-10 | Brand: Ainavi

Introduction

Thank you for choosing the AINAVI SW-10 800W 10-inch Slim Under-Seat Active Car Subwoofer. This product is designed to enhance your car audio experience with powerful bass in a compact form factor. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your subwoofer.

Video: AINAVI SW-10 Subwoofer Product Overview

Product Features

  • High Power Output: 800 Watts peak power for deep, impactful bass.
  • Compact Design: Slim profile allows for under-seat or car trunk installation, saving space.
  • Built-in Amplifier: Features a Class AB amplifier for efficient power delivery.
  • Personalized Aesthetics: Unique skull speaker protector and dynamic blue LED ambient light ring that illuminates when the car is started.
  • Versatile Inputs: Supports both Low Level RCA and High Level inputs for compatibility with various car audio systems.
  • Adjustable Controls: Includes Gain, Bass Boost (0db to 12db), and Crossover (Low Pass Filter: 50Hz-150Hz) controls for fine-tuning sound.
  • Protection Circuits: Equipped with Thermal Protection, Short Protection, and Overload Protection circuits for safety and durability.
  • Status Indicator: Green Power/Red Protect LED for easy monitoring of operational status.
  • Durable Construction: Aluminum alloy exterior for enhanced heat dissipation and longevity.
  • Wide Compatibility: Designed to be compatible with a wide range of car audio systems.
AINAVI SW-10 Subwoofer with 800W, 10-inch, and Built-in Class AB amplifier labels

Image: Key features of the AINAVI SW-10 Subwoofer.

Six advantages of the AINAVI subwoofer: 800 Watts, Aluminum exterior, stereo surround sound, simple remote control tuning, pure copper wire, compatible with 99% of systems.

Image: Summary of the subwoofer's advantages.

Package Contents

Please check the package for the following items:

  • AINAVI SW-10 Active Subwoofer
  • RCA Audio Cable
  • 12V Power Cable
  • GND Cable (Ground Cable)
  • High to Low Level Converter
  • Power Fuse
  • REM Cable (Remote Turn-On Cable)
  • Remote Control for tuning
AINAVI SW-10 Subwoofer with dimensions and a visual list of included accessories: RCA Audio Cable, 12V Power Cable, GND Cable, High to Low Level Converter, Power Fuse, REM Cable.

Image: Subwoofer dimensions and included accessories.

Specifications

Detailed technical specifications for the AINAVI SW-10 subwoofer:

ParameterValueParameterValue
Product ModelSW-10LVR Low Input Sensitivity300mv
RMS Power220 WattsBass Boost0db to 12db
Peak Power800 WattsLow Pass Filter50Hz-150Hz
THD Total Harmonic Distortion<0.4%Load4Ω
SNR Signal To Noise Ratio>90dbFuse Rating25A
Frequency Response20Hz-500HzActive Bass10 inch
High Frequency Input Sensitivity0.9VDimensions (L*W*H)343x260x82mm
Voltage12 VItem Weight6kg
MaterialAluminum AlloyCertificationCE
Table of product parameters for the AINAVI SW-10 subwoofer.

Image: Product Parameters Table.

Setup and Installation

Placement

The slim design of the AINAVI SW-10 allows for flexible placement options. Common locations include:

  • Under-Seat Mount: Ideal for discreet installation and maximizing cabin space. Ensure there is adequate clearance and ventilation.
  • Car Trunk Mount: Provides a secure location, especially if more space is available.

Always ensure the subwoofer is securely mounted to prevent movement during driving, which could cause damage or injury. Avoid placing it in areas where it might obstruct vehicle controls or passenger movement.

AINAVI subwoofer installed under a car seat, demonstrating its slim profile and discreet placement.

Image: Subwoofer installed under a car seat.

Two images showing the AINAVI subwoofer installed under a seat and in a car trunk, along with a graphic indicating compatibility with various car types.

Image: Placement options and car compatibility.

Wiring Diagram

Proper wiring is crucial for the performance and safety of your subwoofer. Refer to the diagram below for connecting the subwoofer to your car's electrical system and audio source. It supports both High and Low Level inputs.

Detailed wiring diagram for connecting the AINAVI SW-10 subwoofer to a car stereo/radio, showing connections for power, ground, remote, and high/low level inputs.

Image: Comprehensive wiring diagram for the AINAVI SW-10 Subwoofer.

Key Connections:

  • Power (V+): Connect to the car battery (positive terminal) via the included 12V Power Cable and Power Fuse.
  • Ground (GND): Connect to a clean, unpainted metal surface on the car chassis using the GND Cable.
  • Remote (REM): Connect to the remote turn-on lead from your car stereo/radio. This cable signals the subwoofer to turn on/off with your car's audio system.
  • Audio Input: Choose between RCA Input (Low Level) or High Level Input, depending on your car stereo's output. Use the High to Low Level Converter if your stereo only has speaker-level outputs.

Ensure all connections are secure and properly insulated to prevent short circuits.

Rear panel of the AINAVI SW-10 subwoofer showing various input and control ports, including High/Low level inputs, RCA input, remote control port, and fuse.

Image: Subwoofer rear panel connections.

Operating Instructions

Initial Power On

Once properly installed and wired, turn on your car's ignition and car stereo. The subwoofer should power on automatically via the REM connection. The Green Power LED will illuminate, indicating it is operational. If the Red Protect LED illuminates, refer to the Troubleshooting section.

Remote Control Tuning

Use the included remote control to adjust the subwoofer's settings for optimal sound. The remote typically allows adjustment of:

  • Volume/Gain: Controls the overall output level of the subwoofer. Start with a low setting and gradually increase.
  • Bass Boost: Enhances low-frequency response. Use sparingly to avoid distortion.
  • Low Pass Filter (LPF): Adjusts the upper frequency limit the subwoofer will play. Typically set between 80Hz-120Hz to blend with your main speakers.
Image showing the AINAVI subwoofer and a hand holding a remote control for tuning volume and gain settings.

Image: Remote control tuning for the subwoofer.

LED Ambient Lighting

The subwoofer features a dynamic blue LED ambient light ring around the speaker. This lighting activates when the subwoofer powers on, adding a visual flair to your car's interior, especially at night.

Close-up of the AINAVI subwoofer's skull design with blue LED ambient lighting activated.

Image: Subwoofer with blue LED ambient lighting.

Comparison image showing the AINAVI subwoofer with its LED lighting off and then on, highlighting the blue illumination.

Image: LED lighting off vs. on.

Maintenance

To ensure the longevity and optimal performance of your AINAVI SW-10 subwoofer, follow these maintenance guidelines:

  • Cleaning: Regularly wipe the exterior of the subwoofer with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
  • Ventilation: Ensure that the subwoofer's ventilation areas are not blocked. Proper airflow is essential for heat dissipation, especially for the built-in amplifier.
  • Cable Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion. Loose connections can lead to poor performance or electrical issues.
  • Environmental Conditions: Avoid exposing the subwoofer to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

Troubleshooting

If you encounter issues with your subwoofer, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No Power / Green LED OffBlown fuse, loose power/ground/remote wire, no power from car stereo.Check the 25A fuse, ensure all power, ground, and remote connections are secure. Verify car stereo is providing a remote signal.
No Sound OutputLoose RCA/High Level input cables, low gain setting, incorrect crossover setting, car stereo output issue.Check audio input cables. Increase gain on subwoofer. Adjust LPF. Ensure car stereo is sending audio signal.
Distorted SoundGain set too high, bass boost too high, damaged speaker, poor power connection.Reduce gain and/or bass boost. Check wiring for secure connections. If distortion persists, consult a professional.
Red Protect LED OnOverheating, short circuit, overload.Turn off the system and allow it to cool. Check speaker wires for shorts. Reduce volume. Ensure adequate ventilation.
Weak BassLow gain, incorrect phase setting, LPF too low, poor enclosure.Increase gain. Experiment with the phase switch (0° or 180°). Increase LPF. Ensure subwoofer is securely mounted.

User Tips

Here are some general tips to enhance your experience with the AINAVI SW-10 subwoofer:

  • Start with Flat Settings: When first setting up, set all equalizer and bass boost controls on your car stereo and the subwoofer to flat or minimum. Gradually adjust for desired sound.
  • Phase Adjustment: Experiment with the phase switch (0° or 180°) on the subwoofer. One setting will typically sound louder and more impactful, indicating it's in phase with your main speakers.
  • Crossover Tuning: The Low Pass Filter (LPF) is crucial. Set it to where your main speakers start to roll off their bass. A common starting point is 80Hz-100Hz. This ensures a smooth transition between your subwoofer and other speakers.
  • Secure Mounting: Always ensure the subwoofer is firmly secured. A loose subwoofer can rattle, produce poor bass, and become a safety hazard.
  • Listen for Distortion: If you hear any distortion, immediately reduce the volume or gain settings. Playing distorted audio can damage the subwoofer.

Warranty and Support

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.