1. Introduction
The OKAM Mini Security Camera is a versatile surveillance device offering 5MP Ultra HD resolution, a 120° wide-angle lens, and advanced detection capabilities. It supports both 4G SIM card connectivity (for specific regions) and 2.4G WiFi, providing flexible deployment options. Key features include two-way audio, PIR motion detection, humanoid detection, infrared night vision, and multiple storage methods. This manual will guide you through the installation, operation, and maintenance of your camera.

2. Package Contents
Please check the package contents carefully upon unboxing. If any items are missing or damaged, contact customer support.
- 1 x OKAM Mini Camera
- 1 x Camera Stand
- 1 x Double-sided Tape
- 1 x Screw Package
- 1 x User Manual
- 1 x Micro USB Cable
Note: Micro SD card and 4G Micro SIM card are NOT included and must be purchased separately.
3. Specifications
| Feature | Specification |
|---|---|
| Product Name | Mini Camera |
| Resolution | 5MP (2K/1080P/720P selectable) |
| Lens Pixel | 5MP |
| Lens Angle | 120° wide angle |
| Video Frame Rate | 30 fps |
| Video Compression | H.265 |
| Two-way Intercom | Supported (built-in microphone and speaker) |
| Infrared Night Vision | Supported (IR-CUT dual filter switching) |
| Motion Detection | PIR, AI Human Body Detection |
| Application | OKAM |
| Image Adjustment | Brightness, contrast, vertical, horizontal adjustable, OSD display |
| Network Support (4G Version) | 3G/4G SIM Card network (WI-FI not supported) |
| Network Support (WiFi Version) | 2.4Ghz WiFi, AP hotspot (4G SIM and 5G network not supported) |
| Memory Expansion | Up to 128GB Micro SD card (not included) |
| Cloud Storage | Subscription required |
| Charging Power Supply | DC 5V/2A |
| Charging Port | Micro USB |
| Battery Capacity | 3000mAh |
| Working Time (Typical) | Up to 60 days (10 triggers per day) |
| Working Time (Low Power Mode) | 24 hours |
| Processor Chip | T31 (High-performance, ultra-low standby power) |
| Material | ABS |
| Color | Black |
4. Setup
4.1 Charging the Camera
Before initial use, fully charge the camera using the provided micro USB cable and a DC 5V/2A power adapter. The charging port is located on the side/back of the camera (refer to Figure 19 for WiFi version ports, Figure 27 for 4G version ports).
4.2 Installing a Micro SD Card (Optional)
The camera supports up to a 128GB Micro SD card for local storage. Locate the Micro SD card slot (refer to Figure 19 for WiFi version ports, Figure 27 for 4G version ports) and insert the card with the contacts facing down until it clicks into place. Ensure the camera is powered off before inserting or removing the card.

4.3 Network Connection
There are two versions of the camera: 4G SIM card version and 2.4G WiFi version. Ensure you have the correct version for your intended use.
4.3.1 4G SIM Card Version
This version works with 3G/4G SIM card networks. It does NOT support WI-FI network connection. Insert a compatible 3G/4G SIM card into the designated slot (refer to Figure 27 for port location). Ensure the SIM card is active and has a data plan.

4.3.2 2.4G WiFi Version
This version connects to a 2.4Ghz WiFi network. It does NOT support 4G SIM cards or 5G networks. Follow the instructions in the OKAM app to connect the camera to your home WiFi network.

4.4 App Installation and Pairing
Download the 'OKAM' application from your device's app store (Android or iOS). Follow the in-app instructions to register an account and add your camera. The app will guide you through the pairing process, which typically involves scanning a QR code on the camera or connecting to its temporary AP hotspot.

4.5 Physical Installation
The camera features a magnetic mount for easy, wire-free installation. It can be placed on a flat surface using the stand or mounted on a wall/ceiling using the included double-sided adhesive pads or screws.


5. Operating Instructions
5.1 Remote Access and Control
Once connected to the network and paired with the OKAM app, you can access and control your camera remotely from anywhere, anytime, using your smartphone or tablet.
5.2 Two-Way Intercom
The camera features a built-in microphone and speaker, enabling two-way voice communication. Use the OKAM app to speak through the camera and listen to audio from its location.

5.3 Motion Detection and Alerts
The camera supports PIR (Passive Infrared) motion detection and advanced AI humanoid detection. When motion or a human figure is detected, the camera can send real-time alerts to your phone via the OKAM app, often including a snapshot or short video recording.



5.4 Infrared Night Vision
The camera is equipped with IR-CUT dual filter switching, allowing for clear infrared HD night vision in low-light or no-light conditions. The night recording is natural and clear.

5.5 Storage Options
The camera supports two primary storage methods:
- Micro SD Card: Local storage up to 128GB. Recordings are saved directly to the card.
- Cloud Storage: A subscription-based service for secure online backup of your recordings.

5.6 Digital Zoom
The camera offers 5x digital zoom, allowing you to magnify details within the live view or recorded footage. You can zoom in for closer inspection or zoom out for maximum coverage of the 120° viewing angle.

6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera lens and body. Avoid abrasive cleaners or solvents.
- Battery Care: For optimal battery life, avoid extreme temperatures. Recharge the camera regularly, especially if it's in an area with frequent motion triggers.
- Firmware Updates: Periodically check the OKAM app for available firmware updates to ensure your camera has the latest features and security enhancements.
- Storage Management: Regularly review and manage your Micro SD card storage. Back up important footage to cloud storage or another device before deleting.
7. Troubleshooting
- Camera not powering on: Ensure the camera is fully charged. Connect it to a power source using the micro USB cable and check if the charging indicator light is on.
- Cannot connect to WiFi (WiFi version): Ensure your WiFi network is 2.4Ghz. The camera does not support 5G WiFi. Check your WiFi password and signal strength.
- 4G SIM card not working (4G version): Verify that the SIM card is active, has a data plan, and is inserted correctly. Ensure your region is supported for the 4G version (Europe, Africa, Asia). The 4G version is not compatible with North America or South America.
- No recordings saved: Check if a Micro SD card is inserted and properly formatted. If using cloud storage, ensure your subscription is active.
- Frequent false alarms: Adjust the motion detection sensitivity settings in the OKAM app. Utilize the AI Humanoid Detection feature and set up specific detection zones to minimize unwanted notifications.
- Poor video quality: Ensure the lens is clean. Check your network connection speed. In the app, you can adjust the resolution settings (2K/1080P/720P).
- Two-way audio issues: Check the microphone and speaker settings in the app. Ensure there are no obstructions blocking the microphone or speaker on the camera.
8. User Tips
- Regional Compatibility: The 4G version of this camera is specifically designed for use in Europe, Africa, and Asian countries and regions. It is not compatible with networks in North America or South America.
- Network Type: The WiFi version only supports 2.4Ghz WiFi networks and cannot connect to 5G networks or use a 4G SIM card. The 4G version only uses 3G/4G SIM card networks and does not support WiFi.
- Essential Accessories: Remember that the Micro SD card for local storage and the 4G Micro SIM card (for the 4G version) are not included with the camera and need to be purchased separately.
- Battery Life Management: The 3000mAh battery can last up to 60 days with approximately 10 motion triggers per day. In continuous low-power mode, it can operate for about 24 hours. Adjusting motion detection frequency and recording duration can help extend battery life.
- Optimal Placement: Utilize the 120° wide-angle lens and magnetic mount to position the camera strategically for maximum coverage and effective motion detection, minimizing blind spots.
9. Warranty & Support
For warranty information and technical support, please refer to the seller's policies or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.