A-BF RX-500

Contents

A-BF RX-500 Thermal Imager User Manual

Model: RX-500

1. Product Overview

The A-BF RX-500 is a high-performance handheld thermal imager designed for a wide range of applications, including water pipe leak detection, PCB testing, circuit inspection, and floor heating system analysis. It features a 256x192 infrared resolution, a broad temperature measurement range, and advanced analysis capabilities.

A-BF RX-500 Thermal Imager with key features
Figure 1: A-BF RX-500 Thermal Imager highlighting key features like 256x192 resolution, -20~550°C temperature range, 25Hz frame rate, and 56x42° field of view.
Detailed view of A-BF RX-500 components
Figure 2: Detailed view of the RX-500, labeling components such as the 3.2" screen, Micro USB port, infrared imaging sensor, and image capture key.

2. Specifications

Feature Specification
Model RX-500
Infrared Resolution 256x192 pixels (49152 pixels)
Field of View (FOV) 56°(H) × 42°(V)
Spectral Response Band 8~14um
Pixel Size 12um
NETD (Thermal Sensitivity) ≤50mK (0.07°C)
Frame Rate 25Hz
Temperature Measurement Range -20℃ ~ +550℃ (-4℉ ~ +1022℉)
Measurement Accuracy (-15℃~+550℃) ±2℃ or ±2%; (-20℃~-15℃) ±4℃ or ±4%
Measurement Units ℃/℉
Lens Focal Length 3.2mm
Emissivity Setting Adjustable from 0.01~1.00
Measurable Distance Range 0m~3m
Best Measurable Distance Range 0.5~1.2m
Focus Mode Free focus
Temperature Measurement Mode Center point/hot and cold spot tracking
Color Palette Rainbow (Spectra), Iron, Cold Color (Cool), White Hot (White), Black Hot (Black)
Display Screen Size 2.8 inch (240×320)
Image Display Mode Infrared/visible light/dual light fusion
Device Storage Built-in 4G eMMC (user available storage space is about 3G)
Storage Image/Video Format JPG/MP4
Image/Video Export Method USB connection to computer export
Image Analysis Function Support offline analysis on PC
Menu Language English, Chinese, Italian, German
Battery Type Removable Rechargeable Lithium Battery (18650)
Battery Capacity 2200mAh
Working Time 2~3 hours
Power Interface Micro USB
Power Configuration 5 minutes / 20 minutes / no automatic shutdown
Work Temperature -10℃ ~ +45℃ (-14℉ ~ +122℉)
Storage Temperature -20℃ ~ +60℃ (-4℉ ~ +140℉)
Relative Humidity 10%~85%RH (non-condensing)
Product Weight 389g
Product Size 90mm×105mm×223mm
Comparison table of RX-500 with another thermal imager
Figure 3: Comparison of RX-500 specifications against a similar model, highlighting its capabilities.

3. Setup

3.1 Battery Installation and Charging

The RX-500 uses a removable 18650 rechargeable lithium battery with a capacity of 2200mAh. Ensure the battery is fully charged before first use.

  1. Locate the battery compartment on the device.
  2. Insert the 18650 battery, ensuring correct polarity.
  3. To charge, connect the device to a power source using the provided Micro USB cable. The charging indicator will show the charging status.

A full charge provides approximately 2-3 hours of continuous working time.

USB charging and data export for RX-500
Figure 4: The RX-500 supports USB charging and data export to a computer.

3.2 Power On/Off

  • Power On: Press and hold the power button (usually marked with a power symbol) until the screen illuminates.
  • Power Off: Press and hold the power button until the device shuts down.

The device has an automatic shutdown feature configurable to 5 minutes, 20 minutes, or disabled.

4. Operating Instructions

4.1 Basic Operation

  • Display: The 2.8-inch screen shows real-time thermal images.
  • Navigation: Use the directional buttons (up, down, left, right) and 'MENU', 'SELECT', 'ENTER' buttons to navigate through the device's interface.
  • Image Capture: Press the dedicated image capture key to take photos or record videos.

4.2 Temperature Measurement Modes

The RX-500 offers various temperature measurement modes to suit different inspection needs:

  • Center Point: Displays the temperature at the center of the screen.
  • Hot and Cold Spot Tracking: Automatically identifies and tracks the highest (hot spot) and lowest (cold spot) temperatures within the field of view.
High and Low Temperature Automatic Tracking feature
Figure 5: The device automatically tracks hot and cold spots, displaying their temperatures.

4.3 Emissivity Settings

Emissivity is a crucial setting for accurate temperature measurement. It can be adjusted from 0.01 to 1.00. The device offers preset modes for common surfaces:

  • Matt (e=0.95): For rough, non-reflective surfaces.
  • Semi-matte (e=0.85): For moderately rough surfaces.
  • Semi-glossy (e=0.60): For slightly reflective surfaces.
  • Glossy (e=0.30): For highly reflective surfaces.
  • Custom: Allows manual input of emissivity value.
Four emissivity modes for thermal imaging
Figure 6: Visual representation of the four emissivity modes: Matt, Semi-matte, Semi-glossy, and Glossy.

4.4 Color Palettes

The RX-500 provides several color palettes to visualize temperature differences, enhancing contrast and making anomalies more apparent:

  • Rainbow (Spectra): A full spectrum of colors, often used for general purposes.
  • Iron: High contrast, good for identifying hot spots.
  • Cool: Emphasizes cooler temperatures.
  • White Hot: Hotter objects appear white, cooler objects appear black.
  • Black Hot: Hotter objects appear black, cooler objects appear white.
Five color palettes for thermal imaging
Figure 7: Examples of the five available color palettes: Spectra, Iron, Cool, White, and Black.

4.5 Data Management

The device has a built-in 4GB eMMC storage (approximately 3GB user-available) for storing images (JPG) and videos (MP4).

  • Exporting Data: Connect the RX-500 to a computer via the Micro USB cable. The device will appear as a removable storage device, allowing you to transfer files.
  • PC Software Analysis: The RX-500 supports offline analysis using dedicated PC software. Install the software on your computer to perform detailed analysis of captured thermal data.
PC software for thermal image and video analysis
Figure 8: The RX-500 connected to a computer, demonstrating the use of PC software for analyzing thermal images and videos.

5. Maintenance

5.1 Cleaning

  • Gently wipe the device body with a soft, damp cloth.
  • For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.
  • Do not use abrasive cleaners or solvents.

5.2 Storage

  • Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Recommended storage temperature: -20℃ to +60℃ (-4℉ to +140℉).
  • Relative humidity should be between 10% and 85%RH (non-condensing).
  • If storing for extended periods, ensure the battery is partially charged (around 50%) and recharge it every few months to maintain battery health.

6. Troubleshooting

6.1 Common Issues and Solutions

Problem Possible Cause Solution
Device does not power on Low or depleted battery; incorrect battery installation. Charge the battery fully. Ensure the battery is inserted with correct polarity.
Inaccurate temperature readings Incorrect emissivity setting; distance to object too far or too close; environmental interference. Adjust emissivity according to the material being measured. Ensure measurement is within the optimal range (0.5-1.2m). Minimize environmental factors like strong air currents.
Cannot connect to PC Faulty USB cable; driver issues; incorrect connection mode. Try a different USB cable. Ensure the device is powered on. Check PC device manager for driver issues.
Screen is frozen or unresponsive Software glitch; temporary system error. Perform a soft reset by holding the power button until the device restarts. If issue persists, contact support.

7. User Tips

  • Emissivity is Key: Always verify and adjust the emissivity setting for the material you are inspecting to ensure the most accurate temperature readings.
  • Optimal Distance: For best results, maintain a measurement distance between 0.5m and 1.2m from the target object.
  • Utilize Color Palettes: Experiment with different color palettes (e.g., Iron for hot spots, White Hot for general contrast) to find the best visualization for your specific application.
  • PC Software for Depth: For detailed analysis and reporting, transfer your captured images and videos to a computer and use the provided PC software. This allows for more in-depth examination of thermal data.
  • Battery Management: To prolong battery life, avoid fully discharging the battery frequently. Charge it when the low battery indicator appears.

8. Warranty and Support

The A-BF RX-500 Thermal Imager comes with a 1-year warranty from the date of purchase, covering manufacturing defects.

For technical support, warranty claims, or service inquiries, please contact your retailer or the manufacturer directly. Ensure you have your purchase receipt and product serial number available.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.