MINISFORUM DEG1

Contents

MINISFORUM DEG1 External GPU Dock Station User Manual

Model: DEG1

1. Introduction

The MINISFORUM DEG1 is an Oculink Graphics Docking Station designed to expand the graphics capabilities of your computer. It supports ATX/SFX standard power supplies and features a PCIe4.0 x4 expansion interface, offering bandwidth up to 64GT/s for lower performance loss. This manual provides essential instructions for setting up, operating, and maintaining your DEG1 to ensure optimal performance and longevity.

MINISFORUM DEG1 External GPU Dock Station
MINISFORUM DEG1 External GPU Dock Station, top-down view.
MINISFORUM DEG1 Features: Docking station, Oculink Graphics, One-year Warranty
Key features of the MINISFORUM DEG1, highlighting its function as a docking station for Oculink Graphics and a one-year warranty.

2. Setup Instructions

Before you begin, ensure you have a compatible graphics card and an ATX or SFX standard power supply (not included with the DEG1).

  1. Install Graphics Card: Carefully insert your desired graphics card into the PCIe x16 slot on the DEG1 dock. Ensure it is seated firmly. The DEG1 is designed to be widely compatible with video cards of unlimited length, supporting up to NVIDIA RTX 4090 and AMD RX 7900 XTX.
  2. Connect Power Supply: Connect a compatible ATX or SFX power supply to the DEG1. The dock requires an ATX24PIN x1 connection for board power.
  3. Connect to Host PC: Use an Oculink 4i cable to connect the DEG1 to your host computer. This provides a PCIe4.0 x4 uplink connection.
  4. Secure Connections: Double-check all power and data connections to ensure they are secure before powering on.
PCIe4.0x4 Expansion Interface Diagram
Diagram illustrating the PCIe4.0x4 Expansion Interface, providing bandwidth up to 64GT/s for lower performance loss.
Signal Amplifier Chip
Close-up view of the built-in signal amplification chip, designed for more stable high-speed data transfer.
MINISFORUM DEG1 with Graphics Card Installed
The MINISFORUM DEG1 with a graphics card installed, showcasing its minimalist design and open space for various card lengths.

3. Operating Instructions

  1. Power On: Turn on the connected ATX/SFX power supply.
  2. Start Host Computer: Power on your host computer. The DEG1 features a 'Follow the Startup' function, allowing it to power on with the main power switch of the host computer. This function works specifically with MINISFORUM machines and requires the use of original cables.
  3. Driver Installation: Once your computer boots, verify that the external GPU is detected by your operating system. Install the latest drivers for your specific graphics card from the manufacturer's website.
Follow the Startup Feature
Illustration of the 'Follow the Startup' feature, where the DEG1 powers on with the host computer, saving electricity and simplifying operation. Note: This feature is specific to MINISFORUM machines and original cables.

4. Maintenance

  • Cleaning: Keep the DEG1 free from dust and debris. Use a soft, dry cloth for cleaning. For hard-to-reach areas, use compressed air.
  • Ventilation: Ensure adequate airflow around the DEG1 and the installed graphics card to prevent overheating. Do not block any ventilation openings.
  • Environment: Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.

5. Troubleshooting

  • No Power to DEG1:
    • Check that the external ATX/SFX power supply is properly connected and switched on.
    • Ensure the ATX24PIN power cable is securely connected to the DEG1 board.
  • Graphics Card Not Detected:
    • Verify that the Oculink 4i cable is securely connected to both the DEG1 and your host computer.
    • Ensure the graphics card is correctly seated in the PCIe x16 slot.
    • Check your host computer's BIOS/UEFI settings to ensure external GPU support is enabled.
    • Install or update the latest graphics drivers for your specific GPU.
  • Performance Issues:
    • Ensure the Oculink cable is securely connected. For optimal performance and the 'Follow the Startup' feature, use original MINISFORUM Oculink cables with compatible MINISFORUM host machines.
    • Confirm your host computer's PCIe slot supports PCIe4.0 x4 bandwidth.

6. Specifications

FeatureSpecification
Model NumberDEG1
Brand NameMINIS FORUM
Uplink InterfaceOculink 4i (PCIe4.0 x4)
Downlink InterfacePCIe x16 (PCIe4.0 x4)
Power Supply CompatibilityATX / SFX Standard Power
Board Power InputATX24PIN x1
ButtonForcePowerOn with LED x1
CertificationCE
Package IncludedYes
OriginMainland China
Package Dimensions (L x W x H)36cm x 22cm x 7cm
Package Weight1.4 kg

7. User Tips

  • Oculink Cable: The DEG1 uses an Oculink 4i (PCIe4.0 x4) connection to your PC. Ensure you use a high-quality Oculink cable for stable and high-speed data transfer. For the 'Follow the Startup' feature to work with MINISFORUM host machines, using original MINISFORUM Oculink cables is required.
  • Power Supply Selection: Remember that the graphics card and power supply are not included. Select an ATX or SFX power supply with sufficient wattage to power both the DEG1 and your chosen graphics card. Consult your graphics card's specifications for recommended power supply requirements.

8. Warranty and Support

The MINISFORUM DEG1 External GPU Dock Station comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. For technical assistance, troubleshooting, or to initiate a warranty claim, please contact the MINISFORUM Official Store directly. Keep your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.