Introduction
The GuliKit KK3 MAX Wireless Controller is a high-performance gamepad designed for a superior gaming experience across multiple platforms. Featuring advanced Hall Effect technology, customizable controls, and robust connectivity options, it offers precision and responsiveness for competitive and casual play.
Key Features:
- Patented Maglev Vibration Motor for enhanced haptic feedback.
- Hall Effect Joysticks & Triggers for drift-free, precise input.
- High Precision Joystick at Level 2200 for delicate micro-control.
- 1000Hz Wired & Wireless Super Response (with Hyperlink Adapter).
- Patented Smartrigger technology to switch between analog and digital triggers.
- 4 Metal Rear Paddles: Detachable, Swappable, and Remappable.
- Multi-platform support: Windows, Nintendo Switch, Android, iOS, Steam.
- Includes Hyperlink Adapter and PC Button Kit.
Controller Layout
Familiarize yourself with the buttons and ports on your GuliKit KK3 MAX controller.


- Controller Mode LED: Indicates the current connection mode.
- USB-C Port: Used for charging and wired connections.
- Player Number LED: Shows the assigned player number.
- Mode Button: Double-click to change mode. Long press for power off. Short press for power on.
- SYNC Button: Long press for 2 seconds or more to start scrolling LEDs for pairing.
- ZL/ZR Triggers: Hall-Linear triggers with Smartrigger technology.
- L/R Buttons: Shoulder buttons.
- G1, G2, G3, G4: Detachable and remappable metal rear paddles.
- Setting Button (Gear icon): Used for configuring special functions.
- APG Button (Double-Square icon): For Auto Pilot Gaming (macro) functions.
Setup and Pairing
Calibration
Gyroscope Calibration
- In the power-on state, place the controller on a flat surface.
- Simultaneously press the 'D-pad Left' and 'A' buttons.
- The controller will vibrate once upon successful calibration.
Note: Calibration is not necessary if the gyroscope is functioning normally.
Joysticks, ZL & ZR Triggers Calibration
- While the controller is powered on, simultaneously press the 'L', 'R', 'D-pad Left', and 'A' buttons for 3 seconds to enter calibration mode.
- During calibration, fully move the left and right joysticks in complete circles 2-3 times.
- Once a joystick's light ring turns green, its calibration is complete.
- The controller will automatically exit calibration mode when both joysticks' light rings turn green.
Pairing Methods
PC (Bluetooth)
Requires a computer with Bluetooth capability (125Hz Polling Rate).
- Switch the controller to PC mode.
- Long-press the SYNC button for 2 seconds; the indicator light will start scrolling, indicating pairing has begun.
- On your computer, go to Bluetooth settings, add a new device, and select "Gulikit Controller".
- The interface will display "Connected" upon successful pairing.
PC (Wired Connection)
Achieves 1000Hz Polling Rate.
- Set the controller to PC mode.
- Connect one end of the provided USB-C data cable to the controller.
- Insert the other end into a USB-A port on your computer.
For desktop computers, it is recommended to use a USB port on the back of the computer case for a more stable connection.
PC (Using Hyperlink Adapter)
Achieves 1000Hz Polling Rate wirelessly.

- Set the controller to PC mode by holding the SYNC button; the indicator light will start scrolling.
- Insert the Hyperlink Adapter into a USB port on your computer.
- Press the pairing button on the side of the adapter once; its light will flash quickly to enter pairing mode.
- Both the controller and adapter indicator lights will remain solid when pairing is complete.
Nintendo Switch
Method 1:
- On your Nintendo Switch, navigate to the controller settings page.
- Set the controller to Switch mode by holding the SYNC button for 2 seconds; the indicator light will start scrolling.
- The Switch interface will display a connection to the new controller upon successful pairing.
Method 2 (Wired/Wireless via Dock):
- Set the controller to Switch mode.
- Connect one end of the provided data cable to the controller and the other end into a USB-A port on the Switch dock.
- Place the Switch console on the dock. The controller will automatically pair.
- Once paired, you can unplug the data cable for wireless use or leave it connected for wired mode.
Android, iOS, and macOS Devices
- Double-click the Mode button on the controller to switch to iOS mode.
- Hold the SYNC button for 2 seconds; the indicator light will start scrolling.
- On your device, go to Bluetooth settings, enable Bluetooth, and search for devices.
- Select the "Xbox Wireless Controller" from the list.
- The device will display "Connected" upon successful pairing.
Operating Instructions
All special function settings require holding down the Setting button (Gear icon) while pressing the corresponding buttons for configuration. All special settings will be automatically saved.
- When special settings are configured, the logo light will be blue.
- When no special settings are configured, the logo light will be white.
- During charging, the charging indicator light will be orange; when fully charged, it will be green.
- When the battery is low, the logo light will flash, and the vibration function will automatically turn off. When the battery level is restored, vibration will automatically turn back on.
Auto Pilot Gaming (APG) Function
The APG function allows you to record and replay custom commands or macros using the APG button (Double-Square icon button).

Recording Process
- Hold the APG button for 3 seconds. You will feel a short vibration, indicating that recording has started.
- All subsequent button presses and joystick movements will be recorded.
- To stop recording, either press the APG button again or wait for it to automatically stop after 10 minutes.
- You will feel a long vibration when recording is complete. The maximum recording time is 10 minutes.
Replaying Recorded Actions
- Single Replay: Press the APG button once briefly to automatically repeat the recorded actions once.
- Continuous Replay: Double-click the APG button to continuously repeat the recorded actions until interrupted.
- During replay, you can use the joystick for movement, allowing you to perform actions while moving.
- To cancel replay midway, press any button except the joysticks.
Back Button Configuration (G1-G4)
The 4 metal rear paddles (G1, G2, G3, G4) are detachable, swappable, and remappable.
Mapping Back Buttons
- Hold the Setting button (Gear icon) along with the specific back button (G1-G4) you wish to map. You will feel a short vibration.
- Press the desired button you want to assign to the back button. You will feel a long vibration, indicating successful mapping.
Cancelling Back Button Mapping
- Hold the Setting button (Gear icon) along with the specific back button (G1-G4) whose mapping you wish to cancel. You will feel a long vibration, indicating the mapping is cancelled.
Note: Back buttons only support normal key functions and do not support Continuous Fire.
Trigger Mode Setting (Smartrigger)
The patented "Smartrigger" technology allows quick switching between analog and digital trigger modes.

By toggling the switch on the back of the controller, you can easily switch ZL and ZR triggers between digital tactile switch trigger mode and Hall effect analog trigger mode.
Important: Ensure the triggers are released before switching modes.
Motion Aim Assist
For use in PC FPS games, providing a noticeable advantage for faster aiming.

Hold the Setting button (Gear icon) and press the corresponding button to cycle through settings:
- One vibration: Low sensitivity aim assist.
- Two vibrations: Medium sensitivity aim assist.
- Three vibrations: High sensitivity aim assist.
- Long vibration: Disable motion aim assist (default mode).
Motion assist can be activated when the L button is held in-game, or when the ZL trigger is held in-game.
Joystick Dead Zone Mode
Hold the Setting button (Gear icon) and press the corresponding button to cycle through settings:
- One vibration: Dead Zone mode enabled for the joystick center area.
- Long vibration: Cancel and restore to default for No Dead Zone mode.
Adjust Joystick Sensitivity

Hold the Setting button (Gear icon) and press the corresponding button to cycle through settings:
- One vibration: Sensitivity 50%, joystick ring in red.
- Two vibrations: Sensitivity 100%, joystick ring in blue (default setting).
- Three vibrations: Sensitivity 150%, joystick ring in green.
Note: R3 and L3 refer to the buttons when pressing down on the joysticks. Each joystick can be individually configured.
Star Ring Lighting Effects (RGB Lights)

Hold the Setting button (Gear icon) and press the corresponding button to cycle through lighting effects:
- Default steady on
- Joystick-activated flowing light
- Vibration-activated light
- Trigger-activated flowing light
- Off
- Repeat in this cycle.
D-Pad Direction Mode
The D-Pad supports changing from default 8-directions mode to 4-directions mode to avoid D-Pad ghosting issues in FPS games.

Hold the Setting button (Gear icon) and press the corresponding button to cycle through settings:
- One vibration: The D-pad switches to 4-direction mode.
- Long vibration: Restores the default 8-direction mode.
Continuous Fire (Turbo)
Hold the Setting button (Gear icon) and press the corresponding button to cycle through settings:
- One Vibration: Normal Continuous Fire. Active when the button is held down and stops when released.
- Two Vibrations: Auto Continuous Fire. Press the button once to initiate, press again to stop.
- Long vibration: Cancel Continuous Fire (default mode).
A-B X-Y Button Swap
Hold the Setting button (Gear icon) and press the corresponding button to cycle through settings:
- One vibration: Swaps input values of the A-B and X-Y buttons.
- Long vibration: Restores the default button assignments.
Adjust Vibration Intensity
The controller features a patented Maglev Vibration Motor for superior haptic feedback.

Hold the Setting button (Gear icon) and press the corresponding button to cycle through settings:
- One vibration: Weak vibration.
- Two vibrations: Standard vibration (default mode).
- Three vibrations: Strong vibration.
- Long vibration: Turn off vibration.
Adjust Vibration Mode
Hold the Setting button (Gear icon) and press the corresponding button to cycle through settings:
- One vibration: Rotary motor mode.
- Two vibrations: GuliKit Maglev haptic mode (default mode).
- Three vibrations: HD vibration mode.
Maintenance
Cleaning
Use a soft, dry cloth to clean the controller. Avoid using harsh chemicals or abrasive materials.
Storage
Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. The included controller protector and box can help protect it from dust and damage.
Battery Information

The controller is equipped with a 950mAh Li-Polymer battery.
- With joystick lights off and Turbo on settings, the battery can last for 28 hours.
- With low joystick lights and Turbo on settings, the battery can last for 15 hours.
Note: In games with vibration features, the battery life will be reduced accordingly based on the intensity and frequency of the vibrations.
APG Recording File Management
You can manage your Auto Pilot Gaming (APG) recording files:
- Enter APG read/write mode.
- Insert the USB data cable into your computer. A USB drive named "Gulikit dat" should appear.
- Open the USB drive to find a file named "Auto.apg", which is your APG recording file.
- You can copy this file for backup or sharing.
- To overwrite an existing APG file, replace it with a new "Auto.apg" file by copying it into the USB drive.
Important: The controller will automatically power off once the writing process is complete. Alternatively, you can hold the Mode button to power off. Please avoid changing the file name to ensure proper functionality.
Troubleshooting
Controller Not Powering Off Automatically
The controller is designed to automatically power off after 10 minutes of inactivity. However, it will not power off automatically when using the full-auto Continuous Fire or Auto Pilot Gaming (APG) replay function. To manually power off, long-press the Mode button.
Reset to Factory Settings
To clear all custom settings and restore the controller to its factory defaults, hold the Setting button (Gear icon) and press the corresponding button for reset. A long vibration indicates that the reset process is complete.
General Issues and Further Support
For more questions and answers, or if you encounter other issues, please visit the official GuliKit website and navigate to the "Support" section. Look for the "Frequently Asked Questions" (FAQ) related to the controller.
Official Website: www.gulikit.com
Specifications
| Feature | Specification |
|---|---|
| Brand Name | GuliKit |
| Model Number | NS39 |
| GuliKit Model | KK3 Max |
| Type | Gamepads |
| Origin | Mainland China |
| Interface Type | USB, Bluetooth, 2.4G |
| Compatible Platform | Nintendo Switch, PC, Android, iOS, Steam |
| Compatible Brand/Model | Nintendo |
| Compatible Nintendo Model | Nintendo Switch, Nintendo Switch OLED |
| Hall Effect | Yes (Joysticks and Triggers) |
| Trigger Button Type | Hall-Linear (with Smartrigger) |
| Joystick Sensor Module Brand/Type | GuliKit |
| Battery Included | Yes |
| Battery Capacity | 950mAh Li-Polymer |
| Polling Rate | 1000Hz (Wired & Wireless with Hyperlink Adapter) |
| Joystick Precision | Level 2200 (12-bit high-precision sampling) |
| FCC ID | 2AQNP-NS39 |
User Tips
Based on feedback from other users, here are some helpful tips for getting the most out of your GuliKit KK3 MAX controller:
- The Home button wake-up function works reliably on the Nintendo Switch.
- The controller offers high-quality joysticks and excellent battery life.
- Vibration is adjustable, and the controller connects very easily to various devices.
- The macro function (APG) is highly effective for automating complex inputs, such as performing glitches in games like Zelda.
- The back buttons are very responsive; some users find that getting used to the muscle memory for them enhances gameplay significantly.
- Many users find the controller's comfort, setup quality, and overall playability to be superior to other popular gamepads.
- The buttons are noted for being quieter than those on some other controllers.
- The Gulikit controller provides very smooth and precise control, particularly beneficial for racing games.
- The product often comes with a controller protector and a separate box for accessories, which is great for protection and organization.
- It is highly recommended for use with emulators and across different devices due to its versatility.
Warranty and Support
For detailed warranty information, technical support, and frequently asked questions, please refer to the official GuliKit website:
An additional user manual in PDF format is available for download, which may contain further detailed instructions and diagrams. You can typically find this on the product support page of the GuliKit website.