1. Introduction
The JIKONG JKBMS JK-BD4A20S6P is an intelligent active balance Battery Management System designed for Li-ion, LiFePo4, and LTO battery packs ranging from 8S to 20S. This BMS provides comprehensive protection and active balancing to ensure the longevity and optimal performance of your battery system. It features a 60A continuous charge/discharge current and supports various communication interfaces including Bluetooth, RS485, and CAN.

2. Package Contents
Please verify that all items are present in your package:
- BMS Unit (JK-BD4A20S6P) x 1
- Switch x 1 (50cm long)
- NTC Temperature Sensor x 1 (40cm long)
- Sampling Line B x 1 (70cm long)
- Sampling Line A x 1 (70cm long)

3. Specifications
The JIKONG JKBMS JK-BD4A20S6P offers robust performance and features:
| Feature | Specification (JK-BD4A20S6P) |
|---|---|
| Battery Strings | 8S-20S |
| Battery Type | Li-ion, LiFePo4, LTO |
| Balancing Current | 0.4A (Active Balanced) |
| Continuous Charge Current | 60A |
| Continuous Discharge Current | 60A |
| Max Charge Current | 120A |
| Max Discharge Current | 120A |
| Number of Temperature Sensors | 3 Pcs |
| Communication Interfaces | Bluetooth (BT), RS485, CANBUS, GPS, Display/Switch Key, NTC, Heat |
| Dimensions (L x W x T) | 162mm x 102mm x 20mm (Tolerance ±2mm) |
| Single Cell Voltage Range | 1-5V |
| Voltage Acquisition Error | ±5mV |
| Over Charge Protection Voltage | 1.2-4.35V Adjustable |
| Over Discharge Protection Voltage | 1.2-4.35V Adjustable |
| Short Circuit Protection | Yes (Response 10-500µs) |
| Coulomb Counter | Yes |
| Bluetooth Function | Support for Android/iOS phone |
| Shell Material | Full Aluminum Alloy (Superior heat dissipation) |
| Certifications | CE, FCC |


4. Setup and Wiring
Careful wiring is essential for the safe and correct operation of the BMS. Please follow these steps precisely:
- Connect all individual cell voltage sensing cables (sampling lines) to your battery pack. Ensure each cable is connected to the correct cell terminal (B1, B2, ..., Bn).
- Insert the main sampling cable harness into the corresponding port on the BMS.
- Connect the main negative (B-) line from the battery pack to the B- terminal on the BMS.
- Connect the main positive (P+) line from the battery pack to the P+ terminal on the BMS.
- Connect the load (e.g., motor, inverter) and charger to the appropriate P- and P+ terminals as shown in the wiring diagrams.
- Connect the NTC temperature sensor to the battery pack and plug its cable into the NTC port on the BMS.
- If using, connect the optional switch to the 'Display/Switch Key' port.
- For advanced communication, connect RS485 or CANBUS cables to their respective customized ports.
Important Wiring Notes:
- Always connect the balance wires to the battery cells first, then connect the main battery wires (B- and P-) to the BMS.
- Ensure all connections are secure and free from short circuits.
- Refer to the specific wiring diagram for your battery string count (e.g., 16-string or 24-string) below.



5. Operation
5.1 Mobile App (JIKONG SMART BMS)
The JIKONG BMS can be monitored and configured via a mobile application available for iOS, Android, and HarmonyOS. Scan the QR code on the BMS unit or visit www.jk-bms.com to download the app.
Once connected via Bluetooth, the app provides real-time data:
- Voltage: Overall battery pack voltage and individual cell voltages.
- Current: Charge and discharge current.
- Temperature: Readings from NTC sensors.
- SOC (State of Charge): Battery percentage.
- Alarms: Notifications for overcharge, over-discharge, overcurrent, temperature warnings, etc.
- Cycles: Battery cycle count.
The app also allows adjustment of various protection parameters such as overcharge voltage, over-discharge voltage, overcurrent limits, and temperature thresholds. Always understand the implications before changing these settings.

5.2 PC Software
For more detailed monitoring and configuration, PC software is available. This allows for setting inverter communication protocols and other advanced parameters.

The BMS supports various CAN protocols for compatibility with mainstream inverters:
| Protocol Name | Compatible Brands |
|---|---|
| JIKONG | JIKONG |
| Growatt | Growatt |
| Deye | Deye |
| PYLONTECH | PYLONTECH |
| Victron Energy | Victron Energy |
| Invt | Invt |
| SMA | SMA |
| Srne | Srne |

5.3 Dedicated Display (Optional)
A dedicated JIKONG home storage display can be used to view key battery parameters at a glance, including voltage, current, temperature, and state of charge.

6. Maintenance
- Regular Monitoring: Periodically check the battery parameters via the mobile app or dedicated display to ensure normal operation.
- Firmware Updates: Check the official JIKONG website or app for any available firmware updates to ensure optimal performance and security.
- Physical Inspection: Regularly inspect the BMS and all wiring for any signs of damage, corrosion, or loose connections.
- Cleaning: Keep the BMS unit clean and free from dust and debris. The aluminum alloy shell is dustproof and waterproof, but avoid submerging or exposing it to excessive moisture.
- Temperature: Ensure the BMS operates within its specified temperature range. Good ventilation around the battery pack and BMS is recommended.

7. Troubleshooting
If you encounter issues with your JIKONG BMS, consider the following common problems and solutions:
- BMS Not Powering On:
- Check all wiring connections, especially the main B- and P+ lines, and the sampling cable harness.
- Ensure the battery pack voltage is within the operational range for an 8S-20S configuration.
- No Bluetooth Connection:
- Ensure Bluetooth is enabled on your mobile device.
- Make sure the BMS is powered on.
- Try restarting the app and your mobile device.
- Ensure you are within Bluetooth range.
- Incorrect Voltage Readings:
- Verify that all individual cell sampling lines are correctly connected to their respective cell terminals. A loose or incorrect connection can lead to inaccurate readings.
- Check for any damage to the sampling cable harness.
- Overcharge/Over-discharge Protection Triggered:
- This indicates the battery cells have reached their set voltage limits. The BMS is functioning as intended.
- If these protections trigger prematurely, check your battery cell health and the configured protection parameters in the app/PC software.
- Overcurrent Protection Triggered:
- This means the current draw exceeded the set limit. Reduce the load or check for short circuits in your system.
- Verify the overcurrent protection settings in the app/PC software.
- Temperature Alarm:
- Ensure the NTC temperature sensor is correctly installed and making good contact with the battery cells.
- Check for excessive heat generation from the battery pack or BMS. Improve ventilation if necessary.
For persistent issues, please refer to the official JIKONG website (www.jk-bms.com) for further support or contact their customer service.
8. User Tips
No specific user reviews or Q&A content were provided for direct incorporation. However, based on general best practices for BMS usage, here are some helpful tips:
- Initial Setup: Double-check all wiring before applying power. Incorrect wiring is the most common cause of initial setup issues.
- App Usage: Familiarize yourself with the JIKONG SMART BMS app. It provides valuable real-time data and allows for fine-tuning of protection parameters.
- Balancing: Active balancing works continuously. For new battery packs or after significant use, allow the BMS sufficient time to balance the cells, especially if there are large voltage differences.
- Parameter Adjustment: When adjusting protection parameters, do so incrementally and understand the impact on your battery's performance and lifespan. Consult battery manufacturer specifications.
- Firmware: Keep an eye on the official JIKONG website for firmware updates, which may introduce new features or improve stability.
9. Warranty and Support
For warranty information and technical support, please refer to the official JIKONG website or contact the JIKONG Flagship Store directly. Ensure you have your product model number (JK-BD4A20S6P) and purchase details available when seeking support.
Official Website: www.jk-bms.com