SKMEI 1426/1416

Contents

SKMEI 1426/1416 Sports Digital Watch User Manual

Your guide to setup, operation, and maintenance

1. Introduction

Thank you for choosing the SKMEI 1426/1416 Sports Digital Watch. This watch is designed for durability and functionality, featuring a 13-digit LCD display, daily alarm, chronograph, dual time, countdown timer, and EL backlight. This manual will guide you through the features and operations of your new watch.

2. Package Contents

  • 1 x SKMEI 1426/1416 Sports Digital Watch

3. Watch Layout and Button Functions

Familiarize yourself with the buttons and their functions:

Diagram of SKMEI 1426/1416 watch face with buttons labeled

Image 1: Watch face with button labels. Top-left is Light (A), bottom-left is Mode (B), top-right is Start/Stop (D), and bottom-right is Set/Reset (C).

  • Light Button (A) - Top Left: Activates the EL backlight.
  • Mode Button (B) - Bottom Left: Cycles through different modes (Real Time, Alarm, Chronograph, Dual Time, Countdown Timer).
  • Set/Reset Button (C) - Bottom Right: Used to confirm settings, reset values, or exit setting screens.
  • Start/Stop Button (D) - Top Right: Used to start/stop functions (e.g., chronograph) or adjust values during setting.

4. Initial Setup: Setting Time and Date

Your watch features a 13-digit LCD display showing Hour, Minute, Second, Year (2000-2099), Month, Day, and Week. It also has an auto calendar.

4.1. Setting Real Time (Time and Date)

  1. In Real Time Mode, hold down the Set/Reset Button (C) until the seconds start to flash. This indicates you are in the setting screen.
  2. Press the Mode Button (B) to move the flashing selection through the sequence: Seconds → Hour → Minutes → Year → Month → Day.
  3. When the desired setting (e.g., Hour) is flashing, press the Start/Stop Button (D) to increase the value.
  4. For seconds, pressing Start/Stop Button (D) when seconds are between 30-59 will reset them to 00 and add 1 to minutes. If seconds are between 00-29, minutes remain unchanged.
  5. Once all settings are correct, press the Set/Reset Button (C) to exit the setting screen.
  6. The day of the week will automatically adjust based on your date settings.

4.2. 12/24-Hour Format Selection

In Real Time Mode, press the Start/Stop Button (D) to toggle between 12-hour and 24-hour timekeeping formats. The selected format applies to all modes.

5. Operating Modes

Press the Mode Button (B) to cycle through the watch's functions in the following order:

Real Time → Alarm → Chronograph → Dual Time → Countdown Timer

5.1. Alarm Mode

Your watch features a daily alarm, hourly chime, and snooze function.

5.1.1. Setting the Alarm Time

  1. From Real Time Mode, press the Mode Button (B) once to enter Alarm Mode.
  2. Hold down the Set/Reset Button (C) until the hour setting starts to flash.
  3. Press the Mode Button (B) to move the flashing selection through Hour → Minutes → Month → Day.
  4. Press the Start/Stop Button (D) to increase the flashing value.
  5. To set a daily alarm (no specific month/day), set Month and Day to '--' by pressing Start/Stop Button (D) until '--' appears.
  6. Press the Set/Reset Button (C) to exit the setting screen.

5.1.2. Turning Alarm and Hourly Chime On/Off

  1. In Alarm Mode, press the Start/Stop Button (D) to toggle between alarm display and hourly time signal display (:00).
  2. Press the Set/Reset Button (C) to turn the alarm (AL) or hourly chime (SIG) on or off. Indicators will appear on the display when active.
  3. The alarm sounds for about 10-15 seconds. Press any button to stop it.
  4. For snooze alarm, it repeats up to 6 times every 5 minutes.

5.2. Chronograph Mode (Stopwatch)

The chronograph measures up to 23 hours, 59 minutes, 59.99 seconds.

  1. From Real Time Mode, press the Mode Button (B) twice to enter Chronograph Mode.
  2. Press the Start/Stop Button (D) to start the stopwatch.
  3. Press the Start/Stop Button (D) again to stop it.
  4. To reset the stopwatch, press the Set/Reset Button (C) while it is stopped.
  5. Split Time: While the stopwatch is running, press the Set/Reset Button (C) to display the split time. The stopwatch continues running in the background. Press Set/Reset Button (C) again to release the split display and show the current running time.

5.3. Dual Time Mode

This mode allows you to keep track of a second time zone.

  1. From Real Time Mode, press the Mode Button (B) three times to enter Dual Time Mode.
  2. Hold down the Set/Reset Button (C) until the hour setting starts to flash.
  3. Press the Mode Button (B) to toggle between Hour and Minute settings.
  4. Press the Start/Stop Button (D) to adjust the flashing value.
  5. Press the Set/Reset Button (C) to exit the setting screen.

5.4. Countdown Timer Mode

The countdown timer can be set from 1 minute up to 24 hours.

  1. From Real Time Mode, press the Mode Button (B) four times to enter Countdown Timer Mode.
  2. Hold down the Set/Reset Button (C) until the hour setting starts to flash.
  3. Press the Mode Button (B) to toggle between Hour and Minute settings.
  4. Press the Start/Stop Button (D) to adjust the flashing value.
  5. Press the Set/Reset Button (C) to exit the setting screen.
  6. To start/pause the countdown, press the Start/Stop Button (D).
  7. When the countdown reaches zero, an alarm will sound for 15 seconds or until any button is pressed. The timer automatically resets to its preset value.
  8. To completely stop the countdown and reset it to the preset value, pause it with Start/Stop Button (D), then press Set/Reset Button (C).

5.5. EL Backlight

Press the Light Button (A) at any time to illuminate the display for approximately 3 seconds, allowing you to view the time in low-light conditions.

6. Maintenance and Care

6.1. Water Resistance

Your SKMEI watch is rated for 50M (5ATM) water resistance. This means it is suitable for:

  • Daily use
  • Hand washing
  • Rain exposure
  • Shallow swimming

Important: Do NOT operate buttons underwater. Not suitable for hot water, bathing, showering, or diving, as water vapor can enter the watch.

Watch being exposed to water from washing hands, rain, and swimming

Image 2: Visual representation of water resistance for daily activities like washing hands, rain, and swimming.

6.2. General Care

  • Avoid exposing your watch to harsh chemicals, solvents, or cosmetics, as these can damage the watch's finish and materials.
  • Clean your watch with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by drying.
  • Avoid extreme temperatures and strong magnetic fields.

6.3. Battery Replacement

Your watch uses a CR2032 battery. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance.

7. Troubleshooting

  • Display is blank or dim: The battery may be depleted. Refer to Section 6.3 for battery replacement.
  • Time is incorrect: Reset the time and date according to the instructions in Section 4.1.
  • Buttons are unresponsive: Ensure the watch is not exposed to extreme conditions. If the issue persists, the battery might be low, or there could be an internal fault.
  • Water inside the watch: If moisture appears inside the watch, stop using it immediately and have it inspected by a professional. This may indicate a compromised seal.

8. Specifications

Basic information and dimensions for SKMEI 1426 watch

Image 3: Basic specifications for SKMEI 1426 model.

Basic information and dimensions for SKMEI 1416 watch

Image 4: Basic specifications for SKMEI 1416 model.

FeatureSpecification
BrandSKMEI
Model Number1426 / 1416
MovementDigital
Display Type13-Digit LCD
Case MaterialABS + Stainless Steel (or Plastic)
Band MaterialPU (Polyurethane)
Clasp TypeBuckle
Dial Diameter1426: 52mm | 1416: 46mm
Case Thickness14mm
Band Width1426: 24mm | 1416: 22mm
Band Length1426: 26.5cm | 1416: 25.5cm
Water Resistance Depth5Bar (50 Meters)
Battery TypeCR2032
Weight1426: ABS 55g, Stainless Steel 63g | 1416: ABS 46g, Stainless Steel 51g
FeaturesShock Resistant, LED Display, Chronograph, Complete Calendar, Multiple Time Zone, Alarm, Week Display, Countdown Timer, EL Backlight

9. User Tips

  • The display and backlight are generally very legible, even in low light.
  • The watch is lightweight and comfortable, making it suitable for extended wear during work or sports.
  • Buttons may feel stiff initially; this is normal and contributes to the watch's water resistance.
  • On some models, the right middle button might be a decorative dummy and not functional.

10. Warranty and Support

For any warranty claims, technical support, or further inquiries regarding your SKMEI 1426/1416 Sports Digital Watch, please contact your original retailer or point of purchase. Keep your proof of purchase for any service requests.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.