1. Introduction
The JIKONG Smart Battery Management System (BMS) is designed to protect and optimize the performance of your battery pack. It features active balancing technology, comprehensive protection functions, and smart monitoring capabilities via Bluetooth and PC software. This manual provides essential information for the safe and efficient use of your JIKONG BMS.
2. Product Features
- Active Balancing: Efficiently balances cell voltages to prolong battery lifespan and improve performance.
- Wide Compatibility: Supports 4S-8S Li-Ion, LiFePO4, and LTO battery configurations.
- High Current Capacity: Up to 60A charge/discharge current (model dependent).
- Smart Monitoring: Bluetooth connectivity for mobile app monitoring (Android/iOS) and PC software for detailed data and parameter settings.
- Comprehensive Protection: Includes overcharge, over-discharge, overcurrent, and short circuit protection.
- Temperature Protection: Integrated NTC for temperature monitoring and protection.
- Robust Design: Aluminum alloy shell for enhanced durability and heat dissipation.
- Multiple Interfaces: Supports CAN, RS485, GPS, and external display connections.
Active Balancing Technology
The JIKONG BMS utilizes active balancing (lossless balancing) to transfer energy from cells with higher voltage to those with lower voltage. This process ensures minimal energy loss and operates continuously during charging, discharging, or idle states until the voltage difference is within the set range. This technology helps in achieving a longer battery lifespan and more stable performance.
3. Package Contents
Please check the package contents upon receipt to ensure all items are present:
- BMS Unit x 1
- Sampling Cable x 1 (typically 70cm long)
- NTC Temperature Sensor x 1 (typically 40cm long)
- Switch Key x 1 (typically 50cm long)
4. Specifications
The following table details the specifications for various JIKONG BMS models:
Dimensional Drawings
Dimensions for specific models are provided below (data tolerance range is ±2mm):
5. Setup and Installation
Follow these steps for proper installation and wiring of your JIKONG BMS:
- Connect all balance cables to the battery cells, ensuring correct polarity and sequence (1S, 2S, 3S, etc.).
- Insert the balance cable connector into the BMS.
- Connect the B- line to the total negative terminal of the battery pack.
- Connect the P- line to the negative terminal of the load/inverter/charger.
- Connect the C- line to the negative terminal of the charger (if using a separate charge port).
- Connect the total positive electrode (P+) of the battery pack to the positive terminals of the load/inverter/charger.
Wiring Diagrams
Refer to the following diagrams for detailed wiring instructions:
BMS Interface Details
The BMS features various ports for connectivity and customization:
6. Operating Instructions
Mobile App and PC Software Monitoring
The JIKONG BMS can be monitored and configured using a mobile application (available for iOS, Android, and HarmonyOS) or PC software. The app supports multiple languages and provides real-time data on voltage, current, temperature, and battery cycles.
Parameter Settings
You can freely adjust multiple protection values such as overcharge, over-discharge, overcurrent, and temperature through the mobile app or PC software. Always read the internal parameters of the protection board first before making changes.
Inverter Communication Protocols
The BMS is compatible with mainstream inverter communication protocols. These protocols can be set up via the host computer or mobile application.
7. Maintenance
To ensure the longevity and optimal performance of your JIKONG BMS and battery pack:
- Regularly check all wiring connections for tightness and corrosion.
- Keep the BMS clean and free from dust and moisture.
- Monitor battery cell voltages and temperatures periodically using the app or software to detect any anomalies early.
- Ensure adequate ventilation around the BMS, especially during high current operation, to facilitate heat dissipation.
8. Troubleshooting
If you encounter issues with your JIKONG BMS, consider the following:
- No Power/No Display: Check all main power connections (B-, P+, C-) and ensure the switch key is in the ON position.
- App/Software Connection Issues: Verify Bluetooth is enabled on your device and the BMS. Ensure the correct app/software version is installed. Try restarting both the BMS (if possible) and your device.
- Balancing Not Occurring: Confirm that cell voltage differences exceed the set threshold for active balancing. Check balance wire connections.
- Protection Triggered (Overcharge/Over-discharge/Overcurrent): Review your battery parameters and load/charge conditions. Adjust protection thresholds in the software if necessary, but always within safe limits for your battery chemistry.
- Temperature Warnings: Ensure the NTC sensor is correctly installed and making good contact with the battery. Check for proper ventilation around the battery and BMS.
For persistent issues, please contact JIKONG customer support.
9. User Tips
- Initial Setup: Double-check all balance wire connections meticulously before connecting main power. Incorrect wiring can damage the BMS or battery.
- Parameter Customization: Take advantage of the adjustable protection parameters in the app/software to fine-tune the BMS to your specific battery pack and application needs.
- Firmware Updates: Periodically check for firmware updates for your BMS and associated software/app to ensure optimal performance and access to new features.
- QR Code: The QR code on the BMS board typically links to the app download or detailed instructions. Scan it for quick access to resources.
10. Warranty and Support
JIKONG products are manufactured to high standards. For warranty information, technical support, or service inquiries, please contact your original point of purchase or the JIKONG Flagship Store directly. Ensure you have your product model and purchase details available when seeking support.