GEYA GYHO9 MTS

Contents

GEYA GYHO9 Manual Transfer Switch Instruction Manual

This manual provides instructions for the installation, operation, and maintenance of the GEYA GYHO9 Manual Transfer Switch (MTS).

1. Introduction

The GEYA GYHO9 Manual Transfer Switch (MTS) is designed to facilitate the manual transfer of electrical power from a primary source to an alternate source. This is commonly used in scenarios requiring backup power, such as during utility power outages, to ensure continuous operation of critical loads. Proper installation and operation are crucial for safe and effective use.

2. Product Features

  • Manual Operation: Designed for manual switching between two power sources.
  • Stable Positions: Features three stable operating positions: '1' (Main Power ON), 'O' (OFF), and '2' (Standby Power ON). The 'O' position ensures no power supply from either source.
  • Clear Indicators: Equipped with indicator lights to clearly show which power source is active. The indicator colors are Red for Main Power, Green for OFF, and Yellow for Standby Power.
  • Label Window: Includes a dedicated label window for easy and clear identification of connected power sources.
  • Versatile Application: Suitable for AC rated frequency 50/60Hz, with maximum current ratings of 63A, 100A, and 125A.
  • Pole Configurations: Available in 1-Pole (1P), 2-Pole (2P), 3-Pole (3P), and 4-Pole (4P) versions.
  • Din Rail Mounting: Designed for easy installation on a Din Rail.
GEYA GYHO9 Manual Transfer Switch with indicator lights
Figure 1: GEYA GYHO9 MTS showing indicator lights.
GEYA GYHO9 Manual Transfer Switch with label window
Figure 2: GEYA GYHO9 MTS with a clear label window.

3. Specifications

AttributeValue
Brand NameGEYA
Model NumberGYHO9 MTS
Product NameManual Transfer Isolating Switch
TypeMini Circuit breaker
Rated Current63A, 100A, 125A
Poles1P, 2P, 3P, 4P
Rated Voltage UeAC220/400V (also 220/380V)
Rated Frequency50/60Hz
StandardIEC/EN60947-3
CertificationCE
MountingDin Rail
Mechanical Life10000 Cycles
Cable Size (63A)Max 10mm²
Cable Size (100A, 125A)Max 50mm²
GEYA GYHO9 MTS in 1P, 2P, 3P, 4P configurations
Figure 3: Available pole configurations (1P, 2P, 3P, 4P).
Dimensions for 100A and 125A GEYA GYHO9 MTS models
Figure 4: Dimensions (mm) for 100A and 125A models.
Dimensions for 63A GEYA GYHO9 MTS model
Figure 5: Dimensions (mm) for 63A model.

4. Safety Information

WARNING: Electrical shock hazard. Installation and servicing should only be performed by qualified personnel.

  • Always disconnect power from both sources before installing or servicing the switch.
  • Ensure all wiring connections are secure and comply with local electrical codes.
  • Do not operate the switch if it appears damaged or malfunctioning.
  • Verify correct voltage and current ratings before connecting to any electrical system.

5. Installation (Setup)

The GEYA GYHO9 MTS is designed for Din Rail mounting. Follow these general steps for installation:

  1. Power Disconnection: Ensure all power sources (main and standby) are completely disconnected and locked out before beginning installation.
  2. Mounting: Securely mount the MTS onto a standard Din Rail within an appropriate electrical enclosure.
  3. Wiring: Connect the main power source to the designated '1' terminals and the standby power source to the '2' terminals. Connect the load to the 'LOAD' terminals. Refer to the circuit diagram and wiring demonstration video for detailed connections. Ensure correct cable sizes are used for the respective current ratings (Max 10mm² for 63A, Max 50mm² for 100A/125A).
  4. Grounding: Ensure proper grounding according to local electrical codes.
  5. Verification: Double-check all connections for tightness and correctness before restoring power.
Circuit Diagram for 1P, 2P, 3P, 4P GEYA GYHO9 MTS
Figure 6: Circuit Diagram showing connections for 1P, 2P, 3P, and 4P models.

Wiring Demonstration Video

Video 1: Demonstrates the wiring process and manual switching operation of the GEYA GYHO9 MTS.

6. Operation

The GYHO9 MTS features a front-mounted knob for manual power transfer. The knob has three stable positions:

  • Position '1' (Red Indicator): Main Power Source is connected to the load.
  • Position 'O' (Green Indicator): Both Main and Standby Power Sources are disconnected from the load. This is a safe, isolated position.
  • Position '2' (Yellow Indicator): Standby Power Source is connected to the load.

To switch between power sources:

  1. To transfer from Main Power to Standby Power (or vice-versa), first move the knob to the 'O' (OFF) position. This ensures a momentary break in power, preventing back-feeding and ensuring safety.
  2. Once in the 'O' position, move the knob to the desired power source position ('1' or '2').
  3. Observe the indicator lights to confirm the active power source (Red for Main, Yellow for Standby).

7. Maintenance

The GEYA GYHO9 MTS is designed for reliable operation with minimal maintenance. However, periodic checks are recommended:

  • Visual Inspection: Regularly inspect the switch for any signs of physical damage, loose connections, or overheating (discoloration).
  • Cleaning: Keep the switch free from dust and debris. Use a dry, non-abrasive cloth for cleaning. Do not use liquids or solvents.
  • Connection Tightness: Periodically check and tighten all electrical connections to prevent arcing and ensure optimal performance.
  • Functionality Test: Occasionally test the switching mechanism to ensure smooth operation between all three positions (1-O-2).

Always disconnect power before performing any maintenance or cleaning.

8. Troubleshooting

ProblemPossible CauseSolution
Difficulty switching between sources (stiff knob)Mechanical resistance, debris, or improper installation.Ensure the switch is correctly mounted and not obstructed. If the issue persists, consult a qualified electrician. Do not force the knob.
No power to load when switch is in '1' or '2' positionNo power from source, loose wiring, or internal fault.Verify power is available from the selected source. Check all wiring connections for tightness. If power is present at the source and connections are secure, the switch may be faulty and require replacement by a qualified professional.
Indicator lights not workingNo power to the switch, faulty indicator, or internal wiring issue.Check if power is supplied to the switch. If power is present and the switch is functioning otherwise, the indicator light may be faulty. If no power, troubleshoot the power source.

Note on Diagram Ratings: Some diagrams may show a general rating (e.g., 22A). Please refer to the product label and specifications table for the actual rated current of your specific GYHO9 MTS model (63A, 100A, or 125A).

9. User Tips

  • Always ensure a brief pause in the 'O' (OFF) position when transferring between power sources to prevent electrical transients and ensure smooth operation.
  • For optimal safety and longevity, consider having the installation and any complex troubleshooting performed by a certified electrician.
  • Clearly label your power sources using the provided label window to avoid confusion during operation.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact GEYA Official Store or your authorized distributor. Keep your purchase receipt as proof of purchase.

Manufacturer: GEYA

Origin: Mainland China

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.