Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Lemorele USB C Wireless Video Transmitter Receiver Kit. This device allows for seamless wireless transmission of HDMI video and audio signals, enhancing your presentation, entertainment, and meeting experiences without the clutter of cables.

Figure 1: Lemorele USB C Wireless Video Transmitter Receiver Kit
Key Features
- Wireless transmission of HDMI video and audio signals up to 50 meters via WiFi.
- Compatible with HDMI 1.4 and 1.3 standards.
- Automatic identification and configuration of various display modes.
- Built-in automatic equalization system for smooth, clear, and stable picture quality.
- Plug-and-play functionality: No software, settings, or drivers required.
- Supports a maximum resolution of 1080P at 60Hz.
- Supports screen projection display from Apple devices (iPhone 15 and above) and other USB-C devices with video output.
- Dual-band 2.4G+5G WiFi transmission for stable connection.
Package Contents
Please verify that all items are present in your package:
- 1x Wireless HD Transmitter (USB-C)
- 1x Wireless HD Receiver (HDMI)
- 1x USB-A to USB-C Power/Data Cable (for Transmitter)
- 1x User Manual
- 1x Ejector Pin (for pairing/reset)

Figure 2: Package Contents and Product Dimensions
Product Overview
The Lemorele Wireless Video Transmitter Receiver Kit consists of two main components: the Transmitter and the Receiver. Each unit features an indicator light and a function button.

Figure 3: Wireless HD Transmitter

Figure 4: Wireless HD Receiver
The transmitter connects to your source device (e.g., laptop, phone) via USB-C, while the receiver connects to your display device (e.g., monitor, TV) via HDMI. Both units are designed for simple, plug-and-play operation.
Setup Instructions
Follow these steps to set up your wireless video transmission system:
- Connect the Receiver: Connect the HDMI port of the receiver to an available HDMI input port on your display device (e.g., monitor, television, projector).
- Power On Display and Select Input: Turn on your display device and adjust its input source to the corresponding HDMI port where the receiver is connected. The receiver's boot screen should appear successfully.
- Connect the Transmitter: Connect the USB-C end of the transmitter to a computer, smartphone (Apple 15 or above), or any other device that has a USB-C interface with video output capabilities.
- Initiate Projection: After connecting the transmitter, its indicator light will enter a fast flashing state. Wait for approximately 10 seconds for the connection to establish and the screen projection to begin automatically.

Figure 5: Device Compatibility Overview
Operating Instructions
Once set up, the system operates on a plug-and-play basis. Your source device's screen will automatically be mirrored or extended to the connected display.
Display Modes:
- Mirror Mode: Duplicates your source device's screen onto the external display.
- Extend Mode: Extends your desktop, allowing you to have different content on your source device and the external display. This mode is typically configured through your operating system's display settings (e.g., Windows Display Settings, macOS System Settings > Displays).

Figure 6: Mirror and Extend Display Modes
Multiple Transmitters (Optional):
The system supports connecting up to 8 transmitters to a single receiver, allowing multiple users to share content wirelessly. To switch between transmitters, briefly press the function button on the desired transmitter.

Figure 7: Multi-Transmitter Setup for Collaborative Sharing
Pairing Instructions
The product is pre-paired at the factory. If pairing is lost due to improper operation or other circumstances, you can re-pair the devices using the following steps:
- Prepare Receiver for Pairing: Press and hold the receiver's function button for more than 3 seconds. The display interface will show a prompt like "Release the button to pair with lemorele TX." Release the button. The receiver is now in pairing mode.
- Initiate Transmitter Pairing: Press and hold the transmitter's function button for more than 5 seconds. The transmitter's indicator light will flash quickly, indicating it is searching for the receiver.
- Confirm Connection: Wait for the transmitter's indicator light to turn on continuously (stop flashing). This indicates that the connection is successful, and the devices are paired.
Specifications
| Feature | Specification |
|---|---|
| Brand | Lemorele |
| Model | USB C Wireless Video Transmitter Receiver Kit |
| Connector Type | Wireless (USB-C Transmitter, HDMI Receiver) |
| Wireless Technology | 5G WiFi Transmission, 2.4G+5G Dual-Band |
| Max Resolution | 1080P@60Hz |
| Transmission Distance | Up to 50 meters (line of sight) |
| HDMI Standards | Compatible with HDMI 1.3 and 1.4 |
| Compatibility | Mac OS, Windows, Apple iPhone 15+, Monitors, TVs, Projectors, Laptops, Desktops, Set-top boxes, Cameras, Mobile devices with USB-C video output. |
| Package Length | 12 cm |
| Package Width | 10 cm |
| Package Height | 3 cm |
| Package Weight | 0.25 kg |

Figure 8: Dual-Band Wireless Transmission
Troubleshooting
If you encounter issues, please refer to the following common troubleshooting steps:
- No Signal on Display:
- Ensure both the transmitter and receiver are properly connected and powered.
- Verify that the display device is set to the correct HDMI input source.
- Check if the transmitter's indicator light is solid (connected) or flashing (pairing/searching). If flashing, attempt re-pairing.
- Ensure your source device's USB-C port supports video output.
- Flickering or Unstable Image:
- Reduce the distance between the transmitter and receiver.
- Ensure there are no significant obstructions (walls, large furniture) between the devices.
- Minimize interference from other wireless devices (e.g., Wi-Fi routers, cordless phones).
- Try re-pairing the transmitter and receiver.
- No Audio:
- Check the audio settings on your display device and source device.
- Ensure the volume is not muted on either device.
- Projection Not Starting Automatically:
- Wait for at least 10 seconds after connecting the transmitter.
- Disconnect and reconnect the transmitter.
- If the issue persists, try re-pairing the devices.
User Tips
- For optimal performance, ensure a clear line of sight between the transmitter and receiver.
- The plug-and-play design means you don't need to install any drivers or software, making setup quick and easy.
- Utilize the wireless connection to keep your workspace tidy and free from cable clutter.

Figure 9: Achieve a Tidy Workspace
Warranty and Support
This Lemorele product comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects.
For technical support, warranty claims, or further assistance, please contact Lemorele Official Store customer service through the platform where you purchased the product or visit the official Lemorele website for contact information.