1. Introduction
This user manual provides detailed information on how to use, operate, and understand the technical specifications of your E-ACE B53P 4K UHD Dash Camera. Please read this manual carefully and thoroughly before use to ensure optimal performance and long-term service.
2. Product Description
E-ACE B53P Dash Camera highlighting its UHD 4K, WiFi, GPS, and hidden portable design.
2.1. Components
- Power Key: Used for turning the device on/off and other functions.
- TYPE-C Charging Port: For power input.
- TF Card Slot: For inserting the Micro SD card.
- AV Port: For connecting external devices, such as a rear camera.
Front and back view of the B53P Dash Camera with TYPE-C, AV, and TF card ports labeled.
2.2. Power Key Functions
- On/Off Function: In the shutdown state, long press the power key for 3 seconds to turn on the device. The device will start recording automatically. When the device is on, long press the power key for 3 seconds to save the video file and user settings, then shut down.
- Reset Function: Press the power key 5 times continuously to reset the device and restore factory settings. This can also be used to recover from a device crash.
- Screen Switching Function: Short press the power key once to switch the display screen between "front camera picture", "rear camera picture", "time display picture", and "APP two-dimensional code download picture".
2.3. Main Features
- Smart Chip: Powered by a Novatek 96670 CPU and Sony IMX415 imaging sensor, enabling simultaneous front and rear recording at 3840*2160@25fps and 1920*1080P@25fps respectively.
- 6-Glass Camera Lens: Features F/1.6 aperture and a 6-glass wide-angle lens for superior night vision and clearer details in low-light conditions.
- Dual Lens Recording: A 170-degree front camera and an optional 140-degree rear camera allow for simultaneous recording from two different angles, providing a comprehensive view.
- Versatility of Rear Camera: The rear lens can be installed on the rear windshield for a rear view or on the front windshield to record the car's interior.
- Additional Functions: Includes Loop Recording, G-Sensor for impact detection, Parking Monitor (requires hardwire kit), and WDR (Wide Dynamic Range) for optimal exposure.
Illustration of the Novatek 96670 Smart Chip.
Diagram illustrating the 6-glass UHD lens for enhanced clarity.
Visual representation of the 170° front camera and 140° rear camera recording angles.
Illustrates options for rear camera placement: internal recording, rear view, or front view.
Detailed explanation of Loop Recording, Parking Monitor, G-Sensor, and WDR features.
3. Setup Guide
3.1. App Download and Connection
- Download App:
The companion app, "Viidure", can be downloaded in two ways:
(1) Search "Viidure" in your device's app store (available for iOS and Android).(2) Scan the QR code provided in the manual (or on the device packaging) using WeChat or another scanning application. Select the corresponding system (iOS/Android) to download.
Screenshot of the Viidure app listing in a mobile app store.
- Account Registration:
Enter the "Viidure" app and follow the prompts to register an account. Fill in the required information, obtain the verification code, and complete registration. - Connecting the Camera (WiFi):
Access your mobile phone's WiFi settings. Locate and select the network named "YantopCam-******". Enter the default password "12345678". Once connected, open the "Viidure" app, and click the camera icon to enter the recorder screen.
Screenshot showing the YantopCam WiFi network in a mobile device's WiFi settings.
3.2. Physical Installation
- Turn off your car engine.
- Insert a high-speed TF card (Class 10 or above, 32GB-128GB capacity) into the card slot of the recorder.
- Fix the recorder securely on your car's windshield.
- Connect the power: You can use the car charger plugged into the cigarette lighter, or for 24-hour parking monitoring, use a hardwire kit (buck line) connected to the car's fuse box.
- Use the charging extension cable to connect the recorder's USB port to the car charger. When wiring, lay the cable along the edge of the car windshield.
- Rear Camera Installation (Optional): Install the rear camera at the rear of the vehicle, paying attention to its direction. Route the wiring along the roof of the vehicle. Connect the rear plug to the rear camera interface of the recorder.
Diagram illustrating the recommended position for rear camera installation on a car's exterior.
Wiring for Auto Reversing Function: Connect the rear camera's red cable wire to your car's reverse lamp positive pole (+). When you engage reverse gear, the dashcam will automatically switch to the rear camera view with parking lines. If this function is not desired, you do not need to connect the red wire.
- Adjust the lens position to ensure it is level with the ground.
- Start the engine and check for correct installation. The system working indicator light should be on. When recording starts, the video indicator light will flash.
3.3. Hardwire Kit (Buck Line) Installation
The hardwire kit is used to provide continuous power to the dashcam without occupying the cigarette lighter interface, especially for 24-hour parking monitoring.
Detailed wiring diagram for connecting the hardwire buck line to the car's fuse box.
- Connect the negative pole (black wire) of the Hardwire Kit to the ground of the car fuse box.
- If you want continuous monitoring after parking (24-hour DVR operation), connect the positive pole (red wire) of the Hardwire Kit to the BAT interface of the car fuse box.
- If you want the DVR to stop working after parking, connect the positive pole (red wire) of the Hardwire Kit to the ACC interface of the car fuse box.
4. Operating Instructions
4.1. Parameter Settings (via App)
Once connected via WiFi, use the "Viidure" app to adjust various dashcam parameters, including:
- Modifying the WiFi password.
- Enabling/disabling recording.
- Displaying the watermark time.
- Setting video cycle time.
- Adjusting collision sensitivity (G-Sensor).
- Setting video resolution.
4.2. Parking Monitoring
This feature requires a three-core buck line connection. Standard car chargers cannot trigger this function.
Illustrates the difference between a three-core buck line (required for parking monitoring) and a two-core buck line.
- Time-lapse Recording Cycle: Set for 6, 12, 24, or 48 hours. For example, if set to 6 hours, the device will automatically shut down after continuously recording for 6 hours once parking monitoring is triggered.
- Low Voltage Protection: The dashcam will automatically shut down if the car battery voltage drops below 11.7V to prevent draining the car battery.
4.3. Video Review and Download
You can review recorded videos and download files directly through the "Viidure" app. Downloaded files are automatically saved to your phone's album.
4.4. GPS Function
The GPS function records your vehicle's location, speed, latitude, longitude, and route. This data can be viewed on Google Maps via the "Viidure" app or a GPS player on a computer.
Demonstration of GPS tracking data being displayed on a laptop and mobile phone.
PC Version GPS Track Map Player: Download the player from https://pcgps.ce2ce.com/hit/hitplayer.html. System requirements: Windows 7/8/10 (64-bit or 32-bit, Windows XP not supported) or Mac OS (search "HIT GPS Player" in the store). Open the software, then drag video files to the player to view GPS tracks.
Mobile Version: The "Viidure" app displays speed, direction, and coordinates.
5. Maintenance
- TF Card Management: Regularly format your TF card to prevent file corruption and ensure smooth recording. This also helps in managing storage space.
- Lens Cleaning: Periodically check the camera lens for dirt or fingerprints. Before shooting, gently wipe the lens with lens paper to ensure clear image quality.
- Power Source: Always use the original factory standard adapter charger. Do not use non-standard chargers, as this may damage the device and void the warranty.
- Avoid Disassembly: Do not attempt to dismantle the device yourself, as this may affect the warranty and proper functioning.
6. Troubleshooting (FAQ)
If you encounter any issues under normal operating conditions, refer to the solutions below:
- Cannot take photos or video: Check if the TF card has sufficient space or if it is locked.
- Recording automatically stops: Due to large high-definition video data, ensure you are using a high-speed TF card (Class 10 or above).
- "File" error when replaying pictures/videos: This may indicate incomplete files. Use the Car DVR's "Format" function to reformat the TF card.
- Image is foggy: Check the lens for dirt or fingerprints. Wipe the lens with lens paper before recording.
- Recorder does not work: Press the reset key (usually a small button that requires a sharp object like a paperclip) to restore normal operation.
- Mobile phone cannot connect to the product:
- Ensure your mobile phone is not connected to other WiFi hotspots. The app can only connect to the recorder when your phone's WiFi is specifically connected to the recorder's WiFi network.
- Check if the WiFi signal is strong enough. If the phone is too far from the recorder, the WiFi signal may be weak, causing connection issues.
- Too many surrounding WiFi signals can interfere with the recorder's connection.
- Real-time picture on mobile phone is stuck: This is usually related to the WiFi signal. A weak signal (e.g., due to distance from the recorder) or interference from too many other WiFi signals can cause the picture to lag or freeze.
- Slow preview speed in the album: If there are too many video files on the TF card, it may take longer to obtain file information. Regularly format TF cards to improve performance.
- Computer cannot play video recordings smoothly: The product uses H.264 compression in .mov or .mp4 format. Some built-in players (like Windows Media Player) may not fully support H.264 or experience issues. It is recommended to download professional playback software (e.g., PotPlayer).
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | B53P |
| Installation Type | Portable Recorder (Hidden Type) |
| Chipset Manufacturer | NOVATEK |
| Imaging Sensor | SONY IMX415 |
| Number Of Lenses | 2 |
| Front Camera Lens | 3840*2560P@25FPS, 170° |
| Rear Camera Lens | 1920*1080P@25FPS, 140° |
| Camera Resolution | 3840x2160 |
| Maximum Video Frame Rate | 30 FPS |
| Video Code | H.264 |
| Video Format | TS |
| Max External Memory | 128G |
| Memory Card Required Reading Speed | Class 10 |
| Display | IPS |
| Screen Ratio | 16:9 |
| Touch Screen | No |
| Power Source | Corded Electric |
| Cable Length | 6M |
| Weight | 0.35kg |
| Special Features | G-Sensor, Digital zoom, Radar Detector, Anti Surge Voltage Impact, Waterproof, Anti Fog, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi function, Parking Monitor, 3D DNR, External GPS, NightShot Function, Loop-Cycle Recording Feature, Audio Recorded, Rear Camera, Original Package |
| GPS logger | External |
| WIFI | Built-in |
| Is Batteries Included | Yes |
| Certification | CE, FCC, RoHS |
8. User Tips
- Optional Accessories: The E-ACE B53P dash camera offers optional accessories, such as a rear camera and hardwire kit, which can be purchased separately to enhance functionality.
- TF Card Quality: Always use a high-quality Class 10 Micro SD card (32GB to 128GB) for reliable recording, especially for 4K video. Lower quality cards may lead to recording errors or device malfunction.
- Regular Formatting: To maintain optimal performance and prevent file corruption, it is recommended to regularly format your TF card through the dashcam's settings.
- Parking Monitoring: For 24-hour parking monitoring, a three-core hardwire kit (buck line) is essential. Ensure it is correctly installed to avoid draining your car battery.
- Rear Camera Wiring: If you opt for a rear camera and desire the auto-reversing parking assist function, ensure the rear camera's red cable is correctly wired to your car's reverse lamp positive pole.
9. Warranty and Support
9.1. Warranty
This product comes with a 1-year warranty from the date of purchase.
9.2. Contact Information
For technical support or inquiries, please contact Yantop Group:
- Website: www.e-ace.cn
- Email: fireking@e-ace.cn
- Phone: +86 0755-8464 4084
- WhatsApp: +86-18127083357
- Address: Floor 2nd, No.1 Yuanxia street, Pingshan District, Shenzhen City, Guangdong Province, 518000, China
