1. Product Overview
The X6 Mini IP Camera is a compact, high-definition wireless security camera designed for surveillance and monitoring. It features 1080P Full-HD video recording, a 155-degree wide-angle lens, infrared night vision, and mobile phone remote viewing capabilities. Its built-in battery allows for portable use, and it supports local storage via a TF card.
Figure 1: X6 Mini IP Camera with key features highlighted.
2. Package Contents
Please check the package contents upon unboxing to ensure all items are present:
- 1 x X6 Mini IP Camera
- 1 x Mounting Bracket
- 1 x Charging Cable (USB)
- 1 x Instruction Manual
- 1 x Reset Pin (or similar small tool)
- 1 x USB Adapter (may vary)
Figure 2: Included accessories with the X6 Mini IP Camera.
3. Setup Guide
3.1 Charging the Camera
Before first use, fully charge the camera. Connect the provided USB charging cable to the camera's charging port and a standard USB power adapter (not included) or a power bank. The camera has a built-in 300mAh lithium battery, providing approximately 1.5 hours of continuous operation on a single charge. It can also record while charging.
Figure 3: Power supply options for the X6 Mini IP Camera.
3.2 Inserting a TF Card
The camera supports local storage via a TF (MicroSD) card, with a maximum capacity of 32GB. A TF card is not included and must be purchased separately. Ensure the camera is powered off before inserting or removing the TF card.
- Locate the TF card slot on the side of the camera.
- Gently insert the TF card into the slot until it clicks into place.
- To remove, push the card in slightly until it springs out.
Figure 4: TF card insertion point and supported capacities.
3.3 App Installation and Wireless Connection
To utilize the camera's smart features, download the corresponding mobile application (often referred to as V380 Pro or similar for generic IP cameras). The camera connects via AP hotspot mode for initial setup and remote viewing.
- Scan the QR code in the provided instruction manual or search for the recommended app (e.g., 'V380 Pro') in your mobile app store (Android/iOS).
- Install the app on your smartphone.
- Power on the camera. It will broadcast an AP hotspot.
- On your phone, go to WiFi settings and connect to the camera's hotspot (usually named something like 'MV...' or 'X6...').
- Open the app and follow the on-screen instructions to add the camera and connect it to your home WiFi network for remote access.
Figure 5: Remote viewing via mobile application.
3.4 Mounting the Camera
The camera comes with a mounting bracket for flexible placement.
- Attach the camera to the magnetic base of the bracket.
- Place the bracket on a flat surface or use adhesive to secure it to a wall or ceiling.
- Adjust the camera angle as needed using the flexible joint of the bracket.
Figure 6: Examples of camera placement and mounting.
4. Operating Instructions
4.1 Power On/Off
Locate the power button on the camera. Press and hold to power on or off. Refer to the manual for specific indicator light behavior.
4.2 Video Recording
The camera records video in 1080P Full-HD resolution. When a TF card is inserted, it supports continuous recording. The camera also features intelligent loop recording, which automatically overwrites the oldest footage when the memory card is full, ensuring continuous surveillance.
Figure 7: 1080P Full HD video quality demonstration.
Figure 8: Intelligent loop recording functionality.
4.3 Night Vision
The X6 Mini IP Camera is equipped with infrared night vision, allowing it to capture clear video in low-light conditions or complete darkness. It has a night vision distance of approximately 5 meters, utilizing 960nm invisible infrared lights and a photosensitive sensor.
Figure 9: Day and Night Vision capabilities.
4.4 Remote Viewing and Alarms
Once connected to your home WiFi network via the mobile app, you can view live footage remotely from your smartphone. The camera also supports mobile phone video remote alarms, notifying you of detected activity.
Video 1: Product unboxing and overview of the X6 Mini IP Camera.
5. Maintenance
5.1 Cleaning
To maintain optimal performance, regularly clean the camera lens and body. Use a soft, dry cloth. For stubborn smudges on the lens, a lens cleaning solution designed for optics can be used sparingly. Avoid abrasive cleaners or solvents.
5.2 Battery Care
To prolong battery life:
- Avoid fully discharging the battery frequently.
- Charge the camera regularly, even if not in constant use.
- Store the camera in a cool, dry place when not in use for extended periods, with the battery partially charged (around 50%).
- Avoid exposing the camera to extreme temperatures.
5.3 Storage
When storing the camera for a long time, ensure it is clean, fully charged, and stored in a protective case to prevent dust and physical damage.
6. Troubleshooting
If you encounter issues with your X6 Mini IP Camera, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not powering on | Low battery; Faulty charging cable/adapter | Charge the camera fully. Try a different charging cable or adapter. |
| Cannot connect to WiFi / App | Incorrect WiFi password; Camera too far from router; App not installed correctly | Ensure correct WiFi password. Move camera closer to router. Reinstall the app and follow setup steps carefully. |
| No recording to TF card | TF card not inserted correctly; TF card full; TF card faulty; Incorrect format | Reinsert TF card. Check if card is full (loop recording should overwrite). Try a different TF card. Format the TF card via the app if possible. |
| Poor video quality | Dirty lens; Low light conditions (without night vision); Network bandwidth issues | Clean the lens. Ensure night vision is active in low light. Check your internet connection speed. |
| Night vision not working | IR lights blocked; Sensor malfunction | Ensure nothing is obstructing the IR lights. Check app settings for night vision activation. |
7. Specifications
| Feature | Specification |
|---|---|
| Model | X6 |
| Color | Black |
| Resolution | 1080P (Full-HD) |
| High Definition Support | 1080P (Full-HD) |
| Sensor Technology | CMOS |
| Wide-Angle Lens | 155 degrees |
| Infrared Night Vision | Supported, approx. 5m distance |
| TF Card Support | Max 32GB (user-provided) |
| Video Format | MP4 |
| Wireless Connection | AP Hotspot Mode |
| Battery Capacity | 300mAh |
| Product Dimensions | Approx. 33mm x 33mm x 33mm |
| Packing Weight | 94g |
Figure 10: X6 Mini IP Camera dimensions.
8. Warranty and Support
The manufacturer strives to provide the highest standard of customer service. If you have any issues, inquiries, or need assistance, please refer to the contact information provided with your purchase or on the seller's platform. The product is designed for stable performance in normal environmental conditions.
9. User Tips
- App Selection: Ensure you download the correct and official application for your camera model. If the QR code doesn't work, search for common IP camera apps like 'V380 Pro' in your app store.
- Stable Signal: For optimal performance and continuous recording, ensure the camera is placed in an area with a stable WiFi signal.
- Power Bank for Extended Use: If you need to record for longer than the built-in battery allows, connect a power bank to the camera for continuous power.
