Lemorele P50

Contents

Lemorele P50 4K Wireless HDMI Transmitter and Receiver Kit User Manual

Model: P50 | Brand: Lemorele

1. Introduction

The Lemorele P50 4K Wireless HDMI Transmitter and Receiver Kit offers a convenient solution for extending HDMI signals wirelessly. This kit allows you to transmit high-definition audio and video from various source devices to a display device without the need for long HDMI cables. It supports 4K resolution at 30Hz and features a 5GHz wireless transmission protocol for stable and high-speed performance.

This manual provides detailed instructions for setting up, operating, and maintaining your wireless HDMI kit. Please read it carefully before use to ensure optimal performance and longevity of the product.

Lemorele P50 4K Wireless HDMI Transmitter and Receiver Kit

Figure 1: Lemorele P50 4K Wireless HDMI Transmitter and Receiver Kit

2. Package Contents

Upon opening the package, please verify that all the following items are included:

  • 1 x Lemorele P50 Wireless HDMI Transmitter (TX)
  • 1 x Lemorele P50 Wireless HDMI Receiver (RX)
  • 2 x USB-C Power Cables (approx. 60cm / 23.6inch)
  • 1 x HDMI Extension Cable (approx. 15cm / 5.9inch)
  • 1 x User Manual (this document)
Package contents of Lemorele P50 Wireless HD Kit

Figure 2: Contents of the Portable Wireless HD Kit package

3. Specifications

FeatureSpecification
BrandLemorele
ModelP50
Product NamePortable Wireless HD Kit
Transfer Method5GHz Wireless
HDMI Resolution4K@30Hz
Transmission Distance50 Meters
Power Supply PortUSB-C
MaterialAluminum Alloy + ABS
ColorBlack
Product Specification table for Lemorele P50

Figure 3: Detailed product specifications

4. Setup Guide

Follow these steps to set up your Lemorele P50 Wireless HDMI Kit:

  1. Connect the Transmitter (TX):
    • Locate the USB-C power port on the side of the TX unit.
    • Plug one end of a provided USB-C power cable into this port.
    • Connect the other end of the USB-C power cable to your computer's USB-C port or an external 5V/1A USB power adapter.
    • Plug the HDMI connector of the TX unit into the HDMI output port of your source device (e.g., Desktop PC, Laptop, TV box, game console).
    Step 1: Connect the transmitter (TX) to the computer and power supply.

    Figure 4: Connecting the TX unit

  2. Connect the Receiver (RX):
    • Locate the USB-C power port on the side of the RX unit.
    • Plug the second provided USB-C power cable into this port.
    • Connect the other end of the USB-C power cable to an external 5V/1A USB power adapter.
    • Plug the HDMI connector of the RX unit into an available HDMI input port on your display device (e.g., Monitor, TV, Projector).
    Step 2: Connect the receiver (RX) to the TV HDMI port and power source.

    Figure 5: Connecting the RX unit

  3. Select HDMI Input on Display:
    • On your display device (monitor, TV, projector), use its remote control or menu buttons to select the correct HDMI input source to which the RX unit is connected.
  4. Initiate Connection:
    • Once both TX and RX units are powered and connected, press the button on the TX unit. The devices will automatically pair and establish a wireless connection.
    Click and Go feature for easy connection

    Figure 6: One-click connection

Important: For stable transmission and to prevent issues like signal dropouts or overheating, it is highly recommended to use an external USB power adapter (5V/1A) for both the transmitter and receiver, especially when connecting to devices that may not provide sufficient power through their USB ports.

5. Operating Instructions

5.1 Display Modes

The Lemorele P50 supports two primary display modes:

  • Mirror Mode: Duplicates your source device's screen onto the external display.
  • Extend Mode: Extends your source device's desktop, allowing you to have different content on each screen.

To switch between display modes on a Windows PC, press the Win + P keys simultaneously. A projection menu will appear, allowing you to select 'Duplicate' for Mirror Mode or 'Extend' for Extend Mode.

Two display modes available: Extend Mode and Mirror Mode

Figure 7: Extend and Mirror Display Modes

5.2 Multi-Device Connection

The receiver (RX) unit can connect to up to 8 transmitters (TX) simultaneously. This feature is ideal for presentations or collaborative environments where multiple users need to share their screens with a single display. Simply connect each source device to its own TX unit and press the button on the desired TX unit to switch the display.

One receiver can connect to up to 8 transmitters for multi-device connection

Figure 8: Multi-device connection setup

5.3 Plug & Play Operation

The Lemorele P50 kit is designed for plug-and-play functionality. No drivers, network configuration, or additional software installation is required, making it easy to use for various applications.

Plug & Play functionality, no driver, no network, no software needed

Figure 9: Simple Plug & Play operation

5.4 Product Video Guide

Video 1: A comprehensive guide demonstrating the unboxing, connection, and usage of the Lemorele P50 Wireless HDMI Kit, including switching between mirror and extended display modes.

6. Maintenance

To ensure the longevity and optimal performance of your Lemorele P50 Wireless HDMI Kit, please follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the devices. Avoid using liquid cleaners or aerosols, as they may damage the components.
  • Storage: Store the kit in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the transmitter and receiver gently. Avoid dropping them or subjecting them to strong impacts.
  • Power Supply: Always use the provided USB-C cables and a stable 5V/1A power adapter. Using incompatible power sources can damage the devices.
  • Ventilation: Ensure the devices have adequate ventilation during operation to prevent overheating.

7. Troubleshooting

If you encounter issues with your Lemorele P50 Wireless HDMI Kit, please refer to the following common problems and solutions:

  • No Signal on Display:
    • Ensure both the TX and RX units are properly powered via their USB-C ports and connected to a stable 5V/1A power source.
    • Verify that the HDMI cables are securely connected to both the source device and the display.
    • Check that the correct HDMI input source is selected on your display device.
    • Press the button on the TX unit to re-establish the connection.
    • Try restarting both the source device and the display.
  • Poor Video Quality or Flickering:
    • Ensure the TX and RX units are within the recommended 50-meter transmission distance and have a clear line of sight.
    • Minimize interference from other wireless devices (e.g., Wi-Fi routers, cordless phones) operating on the 5GHz band.
    • Confirm that both TX and RX are receiving sufficient power from a 5V/1A adapter. Insufficient power can lead to unstable transmission.
    • Check if your source device's resolution and refresh rate are compatible with the 4K@30Hz specification of the kit.
  • Audio Issues:
    • Ensure the audio output settings on your source device are correctly configured.
    • Check the volume levels on both your source device and the display.
    • Verify that the HDMI connection is secure.
  • Overheating:
    • Ensure both TX and RX units are well-ventilated and not covered.
    • Confirm that both units are powered by a stable 5V/1A power adapter.
  • Connection Drops Frequently:
    • Check for strong wireless interference in the environment.
    • Ensure the distance between TX and RX is not exceeding 50 meters.
    • Verify stable power supply to both units.

8. User Tips

Here are some tips to enhance your experience with the Lemorele P50 Wireless HDMI Kit:

  • Optimal Power: Always use a dedicated 5V/1A USB power adapter for both the transmitter and receiver. While some devices might provide power through their HDMI or USB ports, a dedicated adapter ensures consistent and sufficient power, preventing performance issues.
  • Clear Line of Sight: For the best wireless performance, try to maintain a clear line of sight between the transmitter and receiver. Walls, furniture, and other obstructions can degrade signal quality and reduce the effective transmission distance.
  • Minimize Interference: Keep the wireless HDMI kit away from other strong wireless signals, such as Wi-Fi routers, microwave ovens, or cordless phones, which can operate on similar frequencies and cause interference.
  • Extended Desktop for Productivity: Utilize the 'Extend' display mode (Win+P on Windows) to maximize productivity. This allows you to work on one screen while displaying a presentation or video on another.
  • Quick Switching: When using multiple transmitters with one receiver, remember that a simple press of the button on the active transmitter will switch the display, making it convenient for multiple presenters.

9. Warranty and Support

The Lemorele P50 4K Wireless HDMI Transmitter and Receiver Kit comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product packaging or contact Lemorele customer support.

For technical assistance, troubleshooting, or any other inquiries, please contact Lemorele customer support through their official website or the contact information provided in your product documentation.

© 2023 Lemorele. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.