PowMr 25A 35A 45A

Contents

PowMr MPPT Solar Charge Controller User Manual

Models: 25A, 35A, 45A

1. Product Introduction

Welcome to the POW-M series solar controllers, a forefront innovation in solar technology designed to provide exceptional performance and reliability for your solar system. Our meticulously designed controllers incorporate advanced digital control technology, featuring an LCD screen and user-friendly buttons to enhance configuration flexibility, allowing real-time monitoring of operational data and system status. Additionally, the controllers support Maximum Power Point Tracking (MPPT) battery charging mode, maximizing energy utilization efficiency.

2. Product Features

  • Compatible with 12V/24V system voltages.
  • Available in 25A, 35A, and 45A charging current options to meet the needs of various solar energy storage systems.
  • The multi-stage charging algorithm is designed to optimize each charging cycle, maintaining battery charge through preset charging parameters for specific stages once the battery is fully charged.
  • MPPT technology tracks the maximum power point voltage (Vmp) of the array, which varies with weather conditions, ensuring maximum power is collected from the array throughout the day.
  • Innovative MPPT technology with tracking efficiency up to 99.9% and peak conversion efficiency up to 97%, reducing power consumption, heat generation, and operating temperature.
  • Adaptive Boost Charging: During initial charging, adaptive boost charging monitors the battery's response and automatically determines the appropriate boost stage duration for each independent charging cycle. This ensures the battery is fully charged at any discharge level or capacity, avoiding overcharging during the boost stage, thereby extending battery life.
  • Max. PV Open-Circuit Voltage: 100V
  • Charging Technology: MPPT
  • Charging Algorithm: 3 Stages
  • IP Class: IP32
  • Support Lithium Battery

3. Specifications

Models25A35A45A
Solar Input Parameters
Max. PV Open-Circuit Voltage100V
Max. Input Power:
For 12V System
For 24V System
300W
600W
420W
840W
540W
1080W
Input Voltage Range:
For 12V System
For 24V System
<60V
<60V
<80V
<80V
<100V
<100V
Battery Charging Parameters
Charging TechnologyMPPT
Charging Algorithm3 Stages
Nominal System Voltage12V/24V
Battery Voltage Range9~30V
Rated Charging Current25A35A45A
Conversion Efficiency≤98%
Max. Power Point Tracking Efficiency>99%
Temperature Compensation-3mV/℃/2V (default)
Self-Consumption44mA/12V; 26mA/24V
DC Output Parameters
Rated DC Output Current15A20A25A
General Parameters
IP ClassIP32
Operating Temperature Range-35℃~+45℃
Humidity Range≤95% Non-condensing
Altitude<3000m
Dimensions160x115x51mm195x135x65mm195x135x65mm

For a visual representation of the specifications, refer to the image below:

PowMr MPPT Solar Charge Controller Specifications Table

4. Setup and Installation

4.1 Package Contents

Inside the package, you will receive:

  • 1x PowMr MPPT Solar Charge Controller
  • 1x User Manual
  • 1x Installation Guide Card
  • 1x Set of Screws

4.2 Product Overview

Familiarize yourself with the controller's physical components:

Front view of PowMr MPPT Solar Charge Controller
Front View
Back view of PowMr MPPT Solar Charge Controller with heatsink
Back View (Heatsink)
Side view of PowMr MPPT Solar Charge Controller with terminals
Side View
Bottom view of PowMr MPPT Solar Charge Controller with terminals
Bottom View
Angled view of PowMr MPPT Solar Charge Controller with terminals
Angled View

4.3 Wiring Diagram and Connection Order

It is crucial to connect the system components in the correct order to ensure safe and proper operation. Follow the steps below and refer to the schematic wiring diagram:

  1. Connect the Battery: Connect the battery to the controller first.
  2. Connect the DC Load: Connect any DC loads to the controller.
  3. Connect the PV Array: Finally, connect the photovoltaic (solar panel) array to the controller.

To disconnect the system, reverse this order: first disconnect the PV array, then the DC load, and finally the battery.

Schematic Wiring Diagram for PowMr MPPT Solar Charge Controller

Schematic Wiring Diagram: Connect the system in the order of 1 battery, 2 load, 3 PV array. Disconnect the system in the reverse order 3, 2, 1.

4.4 Installation Steps (Video Guide)

Watch the video below for a visual guide on the installation process:

Video: PowMr MPPT Solar Charge Controller Installation Guide.

Key steps demonstrated in the video include:

  1. Remove the Port Cover.
  2. Connect the battery.
  3. Connect the PV Array.
  4. Connect the DC Load.
  5. Reassemble the Port Cover.
  6. Starting Up the Controller.

4.5 Battery Type Configuration

The controller is compatible with various lithium and lead-acid battery types (AGM, GEL, FLD, LI, SLA) with system voltages of 12V or 24V. To configure the battery type:

  • Long press the BAT/▲ key to enter the setting program.
  • Use the BAT/▲ and DC/▼ keys to toggle through the battery type options.
  • Press the SET/⚙ key to save and confirm your selection.
  • If you select a User-defined battery type, you can proceed with setting specific battery parameters.
PowMr MPPT Solar Charge Controller compatible with multiple battery types

Image: Controller showing compatibility with AGM, GEL, FLD, LI, SLA battery types.

5. Operating Instructions

5.1 LCD Screen and Working Modes

The controller features a backlight LCD screen that displays real-time operational data and system status. The screen indicates various working modes:

  • 3.0: Night mode, no charging.
  • 4.0: MPPT Charging Mode.
  • 7.0: Boost Charging Mode.
  • 8.0: Floating Charge mode.
PowMr MPPT Solar Charge Controller LCD screen displaying working modes and fault codes

Image: LCD screen interface showing working modes and error code indicators.

5.2 Button Functions

The controller has user-friendly buttons for navigation and settings:

  • PV/▣: Typically used to view PV-related data.
  • BAT/▲: Used to view battery-related data and to increase values or navigate up in settings.
  • DC/▼: Used to view DC load-related data and to decrease values or navigate down in settings.
  • SET/⚙: Used to enter settings menus, confirm selections, and save changes.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your PowMr MPPT Solar Charge Controller:

  • Cleanliness: Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning. Ensure the heatsink on the back is not obstructed to allow for proper heat dissipation.
  • Connection Checks: Periodically inspect all wiring connections (PV array, battery, DC load) to ensure they are tight and free from corrosion. Loose connections can lead to power loss or overheating.
  • Environmental Conditions: Ensure the controller is installed in a well-ventilated area, away from direct sunlight, moisture, and corrosive gases. The operating temperature range is -35℃ to +45℃.
  • Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure your controller has the latest features and bug fixes.
  • Battery Health: Monitor your battery's health and voltage regularly. Ensure the battery type setting on the controller matches your installed battery for optimal charging.

7. Troubleshooting

The LCD screen may display fault codes to indicate issues. Refer to the table below for common fault codes and their solutions:

Fault CodeFault CauseSolution
18Input photovoltaic voltage too lowIncrease the number of solar panels or connect them in series to raise the photovoltaic input voltage.
60Overtemperature protectionAllow the equipment to cool to below the recovery temperature to resume normal charging and discharging.
63Battery voltage too highMeasure to confirm if battery voltage exceeds rated voltage and disconnect photovoltaic array circuit breaker.
65Battery voltage too lowCharge the battery until voltage exceeds the undervoltage recovery point. Refer to '3.7 Default Parameters for Different Battery Types' for specific details.
71Input photovoltaic voltage too highReduce the number of photovoltaic arrays connected to the controller to lower photovoltaic input; or adjust series and parallel connections to reduce voltage or current values.
72Overdischarging currentReduce output terminal load to ensure total load is within rated limits of the controller and battery.
73Overcharging currentReduce output terminal load to ensure total load is within rated limits of the controller and battery.

8. Warranty and Support

8.1 Returns and Refunds

  • Free Returns: Enjoy free returns within 15 days of purchase.
  • Fast Delivery Guarantee: Receive a $1.00 coupon code if your delivery is delayed.
  • Refund for Lost Packages: A full refund will be issued if your package is lost during transit.
  • Refund for Damaged Items: If items are damaged upon arrival, you are eligible for a refund.
  • Refund for Non-Delivery: A refund will be provided if the product is not delivered within 15 days.

8.2 Security and Privacy

Your security and privacy are important:

  • Safe Payments: We do not share your personal details with any third parties without your consent.
  • Secure Personal Details: We protect your privacy and keep your personal details safe and secure.

For further assistance or inquiries, please contact PowMr customer support.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.