JIKONG JK-B2A8S20P

Contents

JIKONG JK-B2A8S20P Smart Active Balance BMS User Manual

Model: JK-B2A8S20P | Brand: JIKONG

1. Introduction

Welcome to the JIKONG JK-B2A8S20P Smart Active Balance Battery Management System (BMS) User Manual. This guide provides essential information for the safe and efficient installation, operation, and maintenance of your BMS. The JK-B2A8S20P is designed for 4S-8S LiFePO4, Li-Ion, and LTO battery systems, offering robust protection and intelligent balancing capabilities.

JIKONG BMS JK-B2A8S20P with key features
Figure 1: JIKONG JK-B2A8S20P BMS highlighting its functions, type, balancing current, battery strings, and charge/discharge current.

2. Product Overview

The JIKONG JK-B2A8S20P is an advanced Smart Active Balance BMS engineered to optimize the performance and longevity of your battery pack. Key features include:

  • Smart Active Balance: Ensures cell voltage consistency with a 2A active balancing current.
  • Wide Compatibility: Supports 4S to 8S configurations for LiFePO4, Li-Ion, and LTO batteries.
  • High Current Capacity: Capable of handling 200A continuous charge and discharge currents.
  • Comprehensive Protection: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, and Short Circuit Protection.
  • Common Port Design: Simplifies wiring with a single port for both charging and discharging.
  • Robust Construction: Features a fully aluminum alloy shell for superior heat dissipation and protection against environmental damage.
  • Intelligent Monitoring: Offers multi-interface display options via mobile APP, PC software, or dedicated JIKONG home storage display.
  • Rich Interfaces: Equipped with GPS, RS485, CAN, Display, Heat, and NTC interfaces for versatile integration.
JIKONG intelligent active balance power management system (BMS) overview
Figure 2: Overview of the JIKONG intelligent active balance power management system (BMS) integrated into a scooter battery system.
Exploded view of BMS showing internal components
Figure 3: Exploded view of the BMS, detailing internal components such as cooling aluminum alloy, MOS, JIKONG MCU, NTC, and sampling line.

3. Specifications

The following table outlines the detailed specifications for the JIKONG JK-B2A8S20P BMS. Note: Data tolerance range is ±2mm.

Product Specifications table for JIKONG BMS models
Figure 4: Detailed product specifications for various JIKONG BMS models, including the JK-B2A8S20P.
JIKONG JK-B2A8S20P Key Specifications
FeatureSpecification
ModelJK-B2A8S20P
Brand NameJIKONG
TypeLI-ION Battery BMS (Active Balanced BMS)
Cells Supported4S-8S (Li-Ion, LiFePO4, LTO)
Charging Current200A (Continuous)
Discharge Current200A (Continuous)
Balance Current2A (Active Balance)
Charge and Discharge PortCommon Port BMS
FunctionsOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection, BT/Display
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS
CertificationCE, FCC, RoHS
Dimensions (approx.)153mm x 126mm x 18mm (L x W x H)
JIKONG BMS JK-B2A8S20P dimensions
Figure 5: Dimensions of the JIKONG JK-B2A8S20P BMS.

4. Package Contents

Upon opening your JIKONG JK-B2A8S20P package, please verify that all the following items are included:

  • 1 x JIKONG JK-B2A8S20P BMS unit
  • 1 x Sampling line (70cm long)
  • 1 x NTC temperature sensor (40cm long)
  • 1 x Switch key (50cm long)
Packing List: BMS, Sampling line, NTC, Switch
Figure 6: Contents of the JIKONG BMS package.

5. Installation and Wiring

WARNING: Improper wiring can cause damage to the BMS, battery, or connected equipment. Professional installation is highly recommended.

  1. Connect all balance cables: Carefully connect the balance wires from your battery cells to the corresponding ports on the BMS. Ensure correct polarity and sequence (e.g., B0, B1, B2...).
  2. Insert the main cable into the BMS: Connect the main battery pack cable to the designated port on the BMS.
  3. Connect B-line and P-line: Connect the B- (total negative electrode) line from the battery pack to the B- terminal on the BMS. Connect the P- (total positive electrode) line from the load/charger to the P- terminal on the BMS.

Refer to the following diagrams for specific wiring configurations:

5.1. Wiring for 8-String Cells

Installation And Wiring diagram for 8-string cells
Figure 7: Wiring diagram for an 8-string battery configuration with the JIKONG BMS. Shows connections for balance wires (1S-8S), total negative (B-), total positive (P-), and external load/inverter/charger.

5.2. Wiring for 4-String Cells

Installation And Wiring diagram for 4-string cells
Figure 8: Wiring diagram for a 4-string battery configuration with the JIKONG BMS. Shows connections for balance wires (1S-4S), total negative (B-), total positive (P-), and external load/inverter/charger.

Ensure all connections are secure and insulated to prevent short circuits.

6. Operation

The JIKONG BMS offers intelligent monitoring and control through various interfaces.

6.1. Mobile App and PC Software

The "JIKONG SMART BMS" mobile application (available for iOS, Android, and HarmonyOS) and PC software provide a comprehensive overview of your battery system's status. You can monitor:

  • Individual cell voltages
  • Total battery voltage
  • Current (charge/discharge)
  • Temperature (NTC sensors)
  • State of Charge (SOC)
  • Alarm status
  • Cycle count
Mobile APP interface showing battery data
Figure 9: Mobile APP interface displaying real-time battery data such as voltage, current, temperature, SOC, and alarm status.
PC software interface for parameter adjustment
Figure 10: PC software interface for intelligent interaction and easy operation, allowing adjustment of various parameters.

6.2. Parameter Adjustment

The APP and PC software allow you to freely adjust multiple protection values, including overcharge voltage, over-discharge voltage, overcurrent limits, temperature thresholds, and balance settings. Always read the internal parameters of the protection board before making any changes to ensure safe operation.

6.3. Protocol Docking

The JIKONG BMS supports communication with mainstream inverter protocols such as Deye, Pylontech, Growatt, Victron Energy, INVT, SMA, and SRNE. CAN protocol settings can be configured via the mobile APP or host computer software.

APP interface for CAN protocol selection
Figure 11: Mobile APP interface for selecting and configuring CAN communication protocols.
Inverter communication protocol via host computer
Figure 12: Host computer interface for setting inverter communication protocols.

7. Active Balancing (Lossless Balancing)

The JIKONG BMS utilizes intelligent active balancing technology to maintain optimal cell voltage consistency. Active balancing achieves this through energy transfer, moving energy from cells with higher voltage to those with lower voltage, thereby minimizing energy loss. This process operates continuously, whether the battery is charging, discharging, or idle, until the voltage difference between cells falls within a predefined range.

Unlike passive balancing, active balancing does not generate significant heat, allowing for larger balancing currents (typically 1A-2A for this model). This makes it particularly suitable for larger capacity battery packs where maintaining balance over time is crucial for performance and lifespan.

Active Balancing (Lossless Balancing) diagram
Figure 13: Diagram illustrating the principle of active balancing, showing energy transfer between battery cells to achieve voltage equilibrium.
Table showing Excellent balance effect
Figure 14: Table demonstrating the excellent balance effect achieved by the JIKONG BMS, comparing cell pressure differences before and after balancing.

8. Maintenance

To ensure the longevity and optimal performance of your JIKONG BMS, follow these maintenance guidelines:

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
  • Keep Clean: Ensure the BMS unit is kept clean and free from dust, moisture, and debris.
  • Monitor via App/Software: Regularly check the battery status and BMS parameters through the mobile app or PC software. Pay attention to any alerts or abnormal readings.
  • Firmware Updates: Check the official JIKONG website or app for any available firmware updates to ensure your BMS has the latest features and bug fixes.
  • Environmental Conditions: Operate the BMS within its specified temperature and humidity ranges to prevent damage.

9. Troubleshooting

If you encounter issues with your JIKONG BMS, consider the following troubleshooting steps:

  • No Power/Display: Check all main power connections (B- and P-) and ensure the battery pack is charged. Verify the switch key is correctly connected and activated.
  • Balancing Issues: Ensure all balance wires are correctly connected to the cells and the BMS. Check the cell voltage differences in the app; if they are too large, balancing may take time.
  • Over-Protection Alarms: If the BMS triggers overcharge, over-discharge, or overcurrent alarms, check your battery voltage, load, and charging current. Adjust protection parameters in the app/software if necessary, but always within safe limits for your battery chemistry.
  • Communication Problems (Bluetooth/RS485/CAN): Ensure the communication module is correctly connected. For Bluetooth, check if it's enabled on your device and within range. For wired communication, verify cable integrity and protocol settings.
  • Temperature Alarms: Check the NTC sensor connections and ensure the battery pack is not overheating or operating in extreme cold.

For persistent issues, consult the detailed troubleshooting section on the JIKONG official website or contact customer support.

10. User Tips

  • Initial Setup: Always connect the balance wires before connecting the main power leads (B- and P-) to prevent damage from voltage spikes.
  • Parameter Customization: Take advantage of the customizable protection parameters in the app/software to fine-tune the BMS for your specific battery chemistry and application.
  • Regular Monitoring: Frequently check the app for real-time data to understand your battery's health and performance. This can help identify potential issues early.
  • Firmware Updates: Keep your BMS firmware updated to benefit from performance improvements and new features.

11. Warranty and Support

JIKONG products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official JIKONG website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.