1. Introduction
Thank you for choosing the YS-AS21 ZK-DAM L1 2.1 Channel Bluetooth Digital Power Amplifier Board. This high-power audio solution integrates microphone input, audio amplification, and tone control, making it suitable for various audio applications including home entertainment and karaoke. This manual provides essential information for safe setup, operation, and maintenance of your amplifier board.
For a detailed user manual in PDF format, please refer to the official documentation available from the seller.
2. Safety Instructions
- Ensure the power supply voltage is within the specified range (DC15-36V) and provides at least 8A current. Using an incorrect power supply can damage the device.
- Do not connect to AC power directly.
- Avoid exposing the board to moisture, water, or extreme temperatures.
- Do not attempt to disassemble or modify the board beyond the intended assembly.
- Ensure proper ventilation to prevent overheating.
- Keep out of reach of children.
3. Package Contents
The contents of your package may vary based on the set purchased:
Set 1:
- 1x Power Amplifier Board
- 1x Shell Kit (requires self-installation)
Set 2:
- 1x Power Amplifier Board
Set 3:
- 1x Power Amplifier Board
- 1x Shell Kit (requires self-installation)
- 1x Karaoke Board
4. Specifications
| Feature | Specification |
|---|---|
| Model | ZK-DAM L1 |
| Amplifier Chip | TPA3251D2 |
| Output Power | Left 220W + Right 220W + Subwoofer 350W |
| Channels | 2.1 Channel |
| Bluetooth Version | 5.0 |
| Bluetooth Transmission Distance | 15 meters (unobstructed) |
| Power Supply | DC15-36V, ≥ 8A (DC5.5-2.5 interface or terminal block) |
| Compatible Speakers (L/R) | 50-200W, 3-8 Ω |
| Compatible Speakers (Subwoofer) | 50-300W, 2-8 Ω |
| Audio Inputs | Bluetooth, AUX, USB Flash Drive, USB Sound Card, Microphone |
| USB Flash Drive Formats | MP3, WAV, SBC, WMA, AAC, APE, FLAC |
| Microphone Inputs | 2x 6.35mm ports (supports wireless/wired, capacitive/dynamic mics) |
| EQ Adjustment | Supported via upper computer (PC software) |
| Protection Mechanisms | Input anti-reverse, over temperature, over current, short circuit, overload |
| Potentiometer Integrated Board Size | 122 x 110 x 27mm |
| Potentiometer Separated Board Size | 103 x 110 x 23.7mm |
| Karaoke Board Size | 100 x 44 x 14.7mm |
5. Setup
5.1. Component Overview
Familiarize yourself with the various ports and controls on the amplifier board:

Image: Detailed diagram of the amplifier board's inputs, outputs, and controls.
5.2. Shell Assembly (If Applicable)
If your package includes a shell kit, you will need to assemble it yourself. Follow the instructions provided with the shell kit to enclose the amplifier board. Ensure all connections are made before securing the shell.
5.3. Power Supply Connection
- Connect a DC15-36V power adapter (with a 5.5-2.5DC plug) to the DC input port on the board.
- Alternatively, you can use the screw terminal block for power input if you are wiring directly. Ensure correct polarity (+ and -).
- The power supply must provide at least 8A current for optimal performance.
5.4. Speaker Connections
Connect your speakers to the corresponding output terminals:
- Subwoofer Speaker: Connect your subwoofer to the dedicated subwoofer output terminals.
- Left Speaker: Connect your left channel speaker to the 'Left Speaker' output terminals.
- Right Speaker: Connect your right channel speaker to the 'Right Speaker' output terminals.
Ensure correct polarity for all speaker connections.
5.5. Audio Input Connections
The amplifier supports multiple audio input methods:
- Bluetooth: Power on the device, and it will automatically enter Bluetooth pairing mode (pilot lamp slow flash). Search for