1. Introduction
The NEXPEAK NX103 ELM327 V1.5 WIFI OBD2 Scanner is a versatile automotive diagnostic tool designed to help users identify and understand issues with their vehicle's engine system. This device connects wirelessly via Wi-Fi to Android, iOS, and Windows devices, allowing you to read and clear diagnostic trouble codes (DTCs) and monitor various real-time sensor data using a compatible application.
Image 1.1: NEXPEAK NX103 ELM327 V1.5 WIFI OBD2 Scanner and its packaging.
2. Key Features and Functions
The NX103 ELM327 V1.5 scanner offers a range of diagnostic capabilities:
- Read Diagnostic Trouble Codes (DTCs): Access both generic and manufacturer-specific codes, with over 3000 generic code definitions available in the database.
- Clear Trouble Codes: Erase fault codes and turn off the Malfunction Indicator Lamp (MIL), commonly known as the 'Check Engine' light.
- Display Current Sensor Data: Monitor real-time vehicle performance data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages / associated short term fuel trims
- Fuel System status
- Fuel Pressure
- Data Logging: Record vehicle data for later analysis.
- Vehicle Information: Access specific vehicle details.
Image 2.1: Overview of NX103 functions.
Image 2.2: OBDII + Phone + APP connection for diagnostics.
3. Compatibility
3.1 Vehicle Compatibility
The NX103 ELM327 V1.5 is compatible with vehicles that support standard OBD2 protocols. It is important to verify your vehicle's compliance before use.
- America Car List (including Brazil): Requires standard OBD2, released from 2000 onwards. Compatible with Chrysler, Ford, GM, Jeep.
- Europe Car List: Requires standard OBD2, released from 2003 onwards. Compatible with Alfa Romeo, SAAB, Acura, Opel, Audi, Seat, Peugeot, Bentley, Skoda, Daewoo, Benz, Daihatsu, Land Rover, BMW, Vauxhall, Citroen, Volvo, Fiat, VW, Ford, Jaguar. Renault cars require models after 2009; does not support Renault/Dacia Logan, Clio.
- Asia Car List (including Australia): Japanese cars require standard OBD2, released from 2006 onwards. Compatible with KIA, Isuzu, Honda, Mitsubishi, Hyundai, Dacia, Lexus, Mazda, Nissan, Subaru, Suzuki, Toyota. Chinese cars require standard OBD2, released from 2011 onwards. Compatible with BYD, Chery, Geely, Great Wall, Karry.
- Exclusions: Not compatible with Hybrid, electric vehicles, HD trucks, Russian Cars VAZ, UAZ, LADA before 2012, and Ssangyong before 2010.
Image 3.1: Supported OBD2 Protocols and general vehicle compatibility.
3.2 Verifying OBD II Compliance
To determine if your vehicle is OBD II compliant, look for a 'VEHICLE EMISSION CONTROL INFORMATION' label under the hood or in the owner's manual. This label should explicitly state 'OBD II CERTIFIED'.
Image 3.2: Example of an OBD II Certified label.
3.3 OBD2 Port Location
The OBD2 port is typically a 16-pin connector. Its location varies by vehicle but is commonly found in one of the following areas:
- Zone A or B: Under the dashboard, near the steering column.
- Zone C, D, or E: In the center console area or passenger footwell.
Image 3.3: Common OBD2 port locations.
3.4 Supported Operating Systems
The NX103 ELM327 V1.5 supports connection to:
- iOS devices
- Android devices
- Windows devices
4. Setup and Installation
Follow these steps to set up your NEXPEAK NX103 ELM327 V1.5 scanner:
- Download and Install App: Download a compatible OBD2 diagnostic application from your device's app store (e.g., Torque for Android, OBD Car Doctor for iOS).
- Plug in OBD2 Scanner: Locate your vehicle's OBD2 port and firmly plug in the NX103 scanner.
- Turn on Car Engine: Start your car's engine.
- Connect via Wireless: On your phone or device, connect to the scanner's Wi-Fi network (usually named 'WIFI_OBDII' or similar).
- Launch App: Open the diagnostic application on your device.
- Configure App (if necessary): In the app settings, ensure the connection type is set to Wi-Fi.
- Start Diagnosis: The app should now connect to the scanner and your vehicle's ECU, allowing you to begin diagnostics.
4.1 Android Connection Guide
For Android devices, using an app like Torque:
- Install the Torque software.
- Plug the OBD2 scanner into your car and turn on the engine.
- Connect to the OBDII Wi-Fi network on your phone.
- Launch the Torque app.
- Go to 'Settings' -> 'OBD2 Adapter Settings' -> 'Connection Type' and select 'WIFI'.
- Exit and re-run the Torque app for a successful connection.
Image 4.1: Android connection steps with Torque app.
4.2 iOS Connection Guide
For iOS devices, using an app like OBD Car Doctor:
- Install the OBD Car Doctor software.
- Plug the OBD2 scanner into your car and start the vehicle.
- Connect to the 'WIFI_OBDII' network in your iOS device's Wi-Fi settings.
- Run the OBD Car Doctor app.
- Click 'Connect' within the app to establish a connection.
Image 4.2: iOS connection steps with OBD Car Doctor app.
5. Operating Instructions
Once the NEXPEAK NX103 is successfully connected to your device and vehicle, you can perform various diagnostic tasks through your chosen OBD2 application:
- Reading Fault Codes: Navigate to the 'Read Codes' or 'Diagnostic Trouble Codes' section of your app. The scanner will retrieve any stored DTCs from the vehicle's engine control unit (ECU) and display their definitions.
- Clearing Fault Codes: After addressing a vehicle issue, you can clear the stored fault codes and turn off the 'Check Engine' light by selecting the 'Clear Codes' or 'Erase Faults' option in the app.
- Viewing Live Data: Access the 'Live Data' or 'Sensor Data' section to monitor real-time parameters such as engine RPM, coolant temperature, vehicle speed, and fuel system status. This can help in diagnosing intermittent issues or verifying repairs.
- Data Logging: Some applications allow you to record live data streams over a period, which can be useful for analyzing performance trends or diagnosing issues that occur during driving.
- Vehicle Information: Retrieve information such as Vehicle Identification Number (VIN), Calibration ID, and Calibration Verification Numbers (CVN) from the ECU.
6. Troubleshooting
6.1 Common Issues and Solutions
- Cannot connect with Wi-Fi:
- Ensure the scanner is firmly plugged into the OBD2 port and the car engine is running.
- Verify that your device's Wi-Fi is enabled and you are connected to the scanner's Wi-Fi network (e.g., 'WIFI_OBDII').
- Check your app's settings to confirm the connection type is set to Wi-Fi.
- Try restarting both the app and your device.
- Scanner does not diagnose all fault codes:
- The ELM327 scanner primarily works with the vehicle's engine system. It can only read fault codes related to the engine. It does not typically work with ABS, airbag, transmission, or other non-engine related fault codes.
- Unsure about car compatibility:
- Refer to Section 3.1 for detailed vehicle compatibility guidelines.
- If still unsure, contact NEXPEAK support with your car model, release year, vehicle capacity, fuel type (diesel/gasoline), and engine work voltage (12v/24v).
- Difficulty finding suitable app software:
- Recommended apps include Torque (Android) and OBD Car Doctor (iOS). Many other compatible apps are available on Google Play Store and Apple App Store.
- Some product documentation may provide QR codes for direct app downloads.
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | NEXPEAK |
| Model | NX103 ELM327 V1.5 |
| Item Type | Code Readers & Scan Tools |
| Special Features | Wifi Connectivity |
| Software Update | No |
| Chip | PIC18F25K80 |
| Supported Protocols | Full OBD2 Protocols (V1.5) including SAE J1850 PWM, SAE J1850 VPW, ISO9141-2, ISO14230-4 KWP, ISO15765-4 CAN |
| Supported Systems | iOS, Android, Windows |
| Supported Languages | Arabic, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Slovenia, Spanish, Swedish, Thai, Turkish (language changes with OS) |
| Origin | Mainland China |
| Certification | CE |
| Dimensions (L x W x H) | 78mm (3.07in) x 45mm (1.77in) x 25mm (0.98in) |
| Weight | 0.06 kg |
Image 7.1: NEXPEAK NX103 dimensions.
Image 7.2: Internal PCB board with PIC18F25K80 chip.
7.1 Package Contents
- 1x NEXPEAK NX103 ELM327 WIFI V1.5 Adapter (with PIC18F25K80 chip)
- 1x Gift retailer box
- 1x User Manual (guides in English, Russian, German)
8. User Tips
- App Selection: While many apps are compatible, some users find specific apps like 'Torque' (Android) or 'OBD Car Doctor' (iOS) to be reliable and user-friendly for basic diagnostics.
- Engine System Focus: Remember that this scanner is primarily designed for engine-related diagnostics. For issues with other vehicle systems (e.g., ABS, airbags), specialized tools may be required.
- Verify Connection: If you encounter connection issues, always double-check that the device is securely plugged into the OBD2 port, the car engine is running, and your phone's Wi-Fi is correctly connected to the scanner's network.
- Clear Codes After Repair: After performing any repairs or maintenance, use the scanner to clear the fault codes. If the issue persists, the code will reappear, indicating further investigation is needed.
9. Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact NEXPEAK Official Store customer service. Keep your purchase receipt as proof of purchase for any warranty claims.