1. Product Overview
The INKBIRD ITH-11-B is a smart indoor/outdoor thermo-hygrometer designed for precise environmental monitoring. It features a high-precision Swiss-made sensor and offers a long battery life of up to 9 months. Its IP65 waterproof and dustproof rating ensures safe operation even in rainy conditions. Utilizing Bluetooth 5.0, it can synchronize data over an open distance of up to 80 meters (262 feet), providing real-time feedback on temperature and humidity. The accompanying app supports viewing of VPD (Vapor Pressure Deficit) and dew point data, along with historical data graphs and alarm functions. This device can also be used with the INKBIRD IBS-M2S (BLE) WiFi Gateway (sold separately) for enhanced intelligent alarm capabilities and response to environmental changes.

2. Package Contents
- ITH-11-B Smart Thermometer Hygrometer x 1
- AAA Batteries x 2 (Pre-installed)
- Lanyard x 1
- User Manual x 1
3. Specifications
| Feature | Specification |
|---|---|
| Model Number | ITH-11-B |
| Product Name | Bluetooth Thermo-hygrometer |
| Color | White |
| Device Size | 65 x 28 x 20 mm (2.56 x 1.1 x 0.79 inch) |
| Connectivity | Bluetooth 5.0 |
| Bluetooth Distance | 80 meters (262 feet) in open distance |
| Waterproof Rating | IP65 |
| Sensor Type | Swiss precision temperature and humidity sensor |
| Sampling Interval | 3 seconds |
| Temperature Range | -40 to 60 °C (-40 to 140 °F) |
| Temperature Accuracy | ±0.2 ℃ (±0.36 °F) |
| Humidity Range | 0% to 99% RH |
| Humidity Accuracy | ±2% (non-condensing) |
| Powered By | 2*AAA 3.0V batteries (1200mAh) |
| Battery Life | 9 months |
| Logging Interval | 1/2/5/10 minutes (configurable via INKBIRD app, 1 min by default) |
| Offline Data Storage | Up to 300 days (varies with logging interval) |
4. Setup and Installation
4.1 Initial Setup
- Open the Back Cover: Gently open the back cover of the device.
- Remove Insulation Strip: Locate and remove the insulating strip from the battery compartment. This activates the batteries.
- Check Battery Polarity: Ensure the batteries are installed with the correct polarity, matching the '+' and '-' signs inside the compartment.
- Replace Back Cover: Close the back cover securely. The ITH-11-B will then switch on automatically.


4.2 Attaching the Lanyard
Before replacing the back cover, it is recommended to thread the included lanyard through the designated hole for easier handling and placement.

5. APP Installation & Connection
5.1 Download the INKBIRD App
Search for 'INKBIRD' in the Google Play Store (for Android devices) or Apple App Store (for iOS devices) to download the application. You can also scan the QR code below for direct download.

5.2 App Compatibility Notes
- iOS Devices: Must be running iOS 12.0 or later.
- Android Devices: Must be running Android 7.1 or later.
- Wi-Fi Gateway: The device supports a 2.4GHz Wi-Fi router only when used with an IBS-M2S BLE WiFi gateway.
- Location Permission: The app requires location information to discover and add nearby devices via Bluetooth. INKBIRD assures that this data is kept strictly confidential and is only used for the app's location function, not collected, used, or disclosed to third parties.
5.3 Registration
- Register Account: A new account registration is required for first-time users of the INKBIRD app.
- Open App & Select Region: Open the INKBIRD app, select your Country/Region, and a verification code will be sent to your registered email.
- Confirm Identity: Enter the verification code to complete your registration.
5.4 Bluetooth Connection
- Add Device: Open the INKBIRD app and tap the "+" icon in the top right corner to add a device.
- Find ITH-11-B: The app will search for nearby devices. Select 'ITH-11-B' from the list.
- Follow In-App Instructions: Complete the Bluetooth connection by following the prompts within the app.
- Proximity: Ensure the ITH-11-B device is placed as close as possible to your smartphone (and router, if connecting to a gateway) during the connection process.
6. Operating Instructions
6.1 App Functions
The INKBIRD app provides comprehensive control and monitoring features:
- Real-time Data: View current temperature, humidity, VPD, and dew point data on your smartphone.
- Historical Data: Access interactive historical data graphs.
- Data Export: Export up to 2 years of historical data from the app.
- Calibration: Calibrate temperature and humidity readings for accuracy.
- Alarms: Set high/low temperature and humidity alarms. Receive notifications when thresholds are exceeded (under Bluetooth connection).
- Recording Interval: Change the data logging interval (1, 2, 5, or 10 minutes; default is 1 minute).
- Firmware Updates: Upgrade device firmware through the app.



6.2 Remote Monitoring and Alarms
The device supports remote monitoring up to 80m/262ft in open distance via Bluetooth 5.0. When connected via Bluetooth, you will receive alarm notifications directly on your smartphone if set temperature or humidity thresholds are exceeded.

6.3 Connecting to a Gateway (Optional)
For more intelligent remote monitoring and alarm notifications beyond Bluetooth range, the ITH-11-B can be connected to an INKBIRD IBS-M2S BLE WiFi Gateway (sold separately). Once you have the gateway, select 'Connect the gateway' from the 'Set' page of the app and follow the instructions to complete the connection.

7. Maintenance
- Keep Sensor Clean: Ensure the sensor is not covered with dust, as this can lead to inaccurate measurements.
- Cleaning: Do not use alcohol to clean the sensor. Use a soft, dry cloth if cleaning is necessary.
- Water Exposure: The product is IP65 waterproof (resistant to spraying water); however, do not immerse it in water.
8. Troubleshooting
| Fault Phenomenon | Possible Reason | Solution |
|---|---|---|
| Incorrect temperature or humidity readings | The air outlet is blocked. | Remove the blockage. |
| Water has seeped into the air outlet of the unit. | Leave the product in a dry, well-ventilated place or wipe it dry with a piece of kitchen paper. | |
| It may be affected by the harsh environment. | Open the INKBIRD app, enter the setting page, and calibrate the temperature and humidity readings. | |
| Cannot remotely view temperature or humidity data on the app | The device is not connected to the WiFi gateway. | Only when your ITH-11 is connected to the INKBIRD M2S (BLE) gateway (sold separately) can you view the temperature or humidity data remotely. |
| Cannot connect Bluetooth | Bluetooth is not enabled on your smartphone. | Make sure Bluetooth is enabled on your smartphone. |
| Device is being added incorrectly. | In the INKBIRD app, click to search for nearby devices and add this device, rather than adding it from the Bluetooth device list. | |
| Smartphone is too far from the product. | Please keep your smartphone within 80 meters (262 feet) of the product. |
9. User Tips
- Battery Check: The device comes with pre-installed batteries and an insulation strip. Ensure the strip is removed during initial setup.
- App Download Issues: If you experience difficulty downloading the INKBIRD app from official stores, consider checking regional restrictions or trying an alternative app store if available.
- Location Services for Bluetooth: For successful Bluetooth connection and device discovery, ensure location services are enabled for the INKBIRD app on your smartphone. The manufacturer confirms this data is used solely for connection purposes and is not shared.
- Bluetooth Range: While the device boasts an 80-meter open-distance range, physical obstacles like walls can significantly reduce this. For optimal performance, try to maintain a clear line of sight or shorter distances between the device and your smartphone/gateway.
- Calibration: For enhanced accuracy in specific environments, consider calibrating the humidity sensor. This can be done at both lower and upper ranges using appropriate calibration methods (e.g., LiCl for lower, NaCl for upper).
10. Safety Information & Compliance
10.1 General Precautions
- Do not disassemble the product if you are not a professional.
- The product measures temperature from -40°C to 60°C (-40°F to 140°F) and is not suitable for use outside this range.
10.2 FCC Requirement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
10.3 IC Warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
- L'appareil ne doit pas produire de brouillage;
- L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.
11. Warranty and Support
This item carries a 1-year warranty against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of INKBIRD, be either repaired or replaced without charge. For any problems in use, please feel free to contact us at support@inkbird.com. We will do our best to help you.
Manufacturer: Shenzhen Inkbird Technology Co., Ltd.
Office Address: Room 1803, Guowei Building, No.68 Guowei Road, Xianhu Community, Liantang, Luohu District, Shenzhen, China
Factory Address: 6th Floor, Building 713, Pengji Liantang Industrial Area, No.2 Pengxing Road, Luohu District, Shenzhen, China