Introduction
The Konsenda 4K 2x3 HDMI Video Wall Controller is designed to split a single HDMI high-definition image signal into multiple segments, distributing them across up to six video display units. This allows for the creation of a large, dynamic image screen by stitching together the displays. It is ideal for applications requiring large-scale visual presentations, such as advertising, monitoring, and entertainment.

Figure 1: The 4K 2x3 UHD Video Wall Controller in action, displaying a single image across six screens.
Features
- Supports HDMI input (HDMI1.4, HDCP1.4).
- Input format: RGB/YUV 24bit.
- Output format: RGB444 24bit.
- Supports 2x3 stitching, offering easy plug-and-play operation.
- Input resolution support up to 4K 30Hz.
- Output resolution support up to 1920x1080P 60Hz.
- Features six HDMI outputs and one 3.5mm stereo audio output.
- Includes RS232 control interface.
- Comes with a remote control for convenient operation.
- Powered by DC5V / 2A.
Package Contents
Please check the package carefully upon receipt to ensure all items are present and undamaged:
- 1 x 4K 2x3 Video Wall Controller
- 1 x Remote Control (Batteries not included)
- 1 x User Manual
- 1 x 5V/2A Power Adapter

Figure 2: Package contents and a connection diagram.
Functional Specifications
The following diagram and list identify the various ports and controls on the video wall controller:

Figure 3: Front and rear panel layout with labeled ports.
- POWER 5V/2A: DC 5V power input port.
- OUT1-OUT6: Six HDMI output interfaces for connecting to displays.
- AUX: 3.5mm audio output.
- SPDIF: Optical fiber audio output.
- MODE: Splicing mode selection button.
- Audio ON/OFF: Sound switch for the 6 displays.
- HDMI Output Indicators (1-6): LEDs indicating active HDMI outputs.
- IR: Remote receiver head.
- RS232: RS232 interface for external control.
- HDTV IN: HDMI input port.
Setup
Follow these steps to set up your video wall controller:
- Connect Input Source: Connect your HDMI source device (e.g., computer, media player) to the HDTV IN port on the video wall controller using an HDMI cable.
- Connect Displays: Connect each of your six display units (LCD TVs, projectors, etc.) to the OUT1 through OUT6 HDMI ports on the controller using HDMI cables. Ensure displays are powered on.
- Connect Audio (Optional): If you require external audio, connect your audio system to the AUX (3.5mm stereo) or SPDIF (optical fiber) output ports.
- Connect Power: Plug the provided 5V/2A power adapter into the POWER 5V/2A port on the controller and then into a power outlet. The device will power on automatically.
- Power On: Power on all connected display units and the HDMI source device.

Figure 4: Visual guide for connecting the video wall controller.
Operating Instructions
The video wall controller can be operated using the front panel buttons or the included remote control.
Splicing Mode Selection
Use the MODE button on the front panel or the dedicated splicing mode buttons on the remote control to cycle through various display configurations. The available modes are:
- 1x1 (Single display)
- 1x2 (One row, two columns)
- 1x3 (One row, three columns)
- 1x4 (One row, four columns)
- 2x1 (Two rows, one column)
- 2x2 (Two rows, two columns)
- 2x3 (Two rows, three columns)
- 3x1 (Three rows, one column)
- 3x2 (Three rows, two columns)
- 4x1 (Four rows, one column)
Note: This product supports landscape mode only. Vertical screen configurations are not supported by this model.

Figure 5: Available splicing modes.
Remote Control Functions
The remote control provides convenient access to all functions. Ensure batteries are inserted correctly (not included).

Figure 6: Remote control layout and button descriptions.
- Splicing Mode Selection: Buttons labeled 2x3, 1x1/2x2, 3x2, etc., allow direct selection of splicing modes. For modes like 1x1 or 2x2, press once for 1x1, press again for 2x2.
- Rotary Selection Key: Rotates the output screen by 180 degrees.
- Resolution Selection Key: Switches between 1080P 60Hz and 4K 30Hz output resolutions.
- Brightness Adjustment Keys (+/-): Adjusts the display brightness.
- Contrast Adjustment Keys (+/-): Adjusts the display contrast.
- Audio ON/OFF: Turns the audio of the display on or off. Note that this does not affect the optical fiber or headphone port audio output.
Audio Separation
The controller supports digital audio and 3.5mm headphone stereo output, allowing for synchronous separation of audio from the HDMI signal to restore the essence of sound.

Figure 7: Audio separation options.
User Tips
- Vertical Screen Setup: This video wall controller is designed for horizontal screen configurations. If you intend to use vertical screens, please note that this model does not natively support vertical mode rotation. For such applications, it is recommended to seek alternative models specifically designed for vertical screen setups or external rotation solutions.
- Remote Control Batteries: Remember to insert two AAA batteries (not included) into the remote control before use.
- Optimal Performance: For the best visual experience, ensure all HDMI cables are of high quality and appropriate length for your setup.
Troubleshooting
If you encounter issues with your video wall controller, please refer to the following common problems and solutions:
- No Image on Displays:
- Ensure all HDMI cables are securely connected to both the source, controller, and displays.
- Verify that the power adapter is correctly connected and the controller is powered on.
- Check if the input source is active and outputting an HDMI signal.
- Confirm that the displays are powered on and set to the correct HDMI input.
- Incorrect Splicing Mode:
- Press the MODE button on the controller or use the remote control to cycle through the desired splicing mode.
- Ensure your displays are arranged physically to match the selected splicing mode (e.g., 2x3 for a 2-row, 3-column setup).
- No Audio Output:
- Check audio connections to external speakers or sound systems.
- Ensure the Audio ON/OFF switch on the remote control is set to ON.
- Verify that the source device is outputting audio via HDMI.
- Remote Control Not Responding:
- Check and replace the batteries in the remote control.
- Ensure there are no obstructions between the remote control and the IR receiver on the controller.
- Point the remote directly at the IR receiver.
- Image Quality Issues (Flickering, Distortion):
- Use high-quality HDMI cables, especially for longer runs.
- Ensure the input resolution from your source matches the capabilities of the controller and displays.
- Check for any electromagnetic interference near the cables or devices.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | konsenda |
| Model Number | 2x3P3 |
| Type | HDMI-Compatible Cables (Controller) |
| Connector A | HDMI-Compatible |
| Connector B | HDMI-Compatible |
| Gender | Male-Female |
| Application | Monitor, Television |
| Shielding | Non-Shielded |
| Outer Diameter | 5mm |
| Package | Yes (Double Blister) |
| Certification | CE, RoHS |
| Origin | Mainland China |
| Input Resolution | Up to 4K 30Hz |
| Output Resolution | Up to 1920x1080P 60Hz |
| Power Supply | DC 5V/2A |
Maintenance
To ensure the longevity and optimal performance of your video wall controller, please follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid or aerosol cleaners, as they may damage the unit.
- Ventilation: Ensure the device is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
- Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the device with care. Avoid dropping or subjecting it to strong impacts.
- Power: Always use the provided 5V/2A power adapter. Using an incorrect adapter may damage the device.
Warranty and Support
This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the manufacturer's official website. Please retain your proof of purchase for warranty claims.
Application Scenes
The Konsenda 4K 2x3 HDMI Video Wall Controller is versatile and can be used in various professional and commercial settings:
- Outdoor Video Walls: For large-scale advertising and public information displays.
- Shopping Mall Video Walls: Enhancing customer experience with dynamic visual content.
- Monitor Rooms: For surveillance, control centers, and data visualization.
- Conference Rooms: For presentations and collaborative displays.
- Entertainment Venues: For immersive visual effects and live event backdrops.

Figure 8: Examples of common splicing modes and application scenes.