Introduction
The Retro Monkey Lamp is a unique and creative lighting fixture designed to add a touch of novelty and charm to your indoor spaces. Crafted from high-quality resin, this lamp features an artistic monkey design, available in both sitting (table lamp) and hanging (wall lamp) configurations. It provides ambient lighting and serves as a distinctive decorative element for various rooms, including bedrooms, studies, and living areas.
Safety Information
- Always ensure the lamp is unplugged from the power outlet before performing any installation, cleaning, or maintenance.
- This lamp is designed for indoor use only. Do not expose it to moisture or outdoor elements.
- Use only E26 base bulbs with a wattage between 30-60W. Exceeding the maximum wattage may cause overheating and damage.
- Keep the lamp away from flammable materials.
- Do not attempt to modify or repair the lamp yourself. Contact qualified personnel for service.
- Ensure the power cord is not pinched or damaged.
Package Contents
Please check the package carefully to ensure all items are present and undamaged.
- 1 x Monkey Lamp (Sitting or Hanging model, depending on your selection)
Note: The E26 light bulb is not included and must be purchased separately.
Specifications
| Feature | Detail |
|---|---|
| Material | Resin |
| Shape | Monkey |
| Process | Spray Paint |
| Specific Uses | Home Decor |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric (AC) |
| Plug Type | US Standard |
| Installation Type | Table / Wall (depending on model) |
| Style | Retro, Novelty |
| Assembly Required | Yes (Bulb insertion) |
| Bulb Type | 1 x E26 (Not Included) |
| Switch Type | Push Button Switch |
| Light Power | 30-60W |
| Voltage | 110V/60HZ |
| Product Size (Sitting Model) | 34cm (L) x 32cm (W) / 13.3in (L) x 12.5in (W) |
| Luminous Flux | 249-2000 (Unit not specified) |
| Shade Type | Clear Glass (for bulb) |
| Body Material (Bulb Holder) | Bakelite |
| Is Dimmable | No |
| Certification | CE |
| Origin | Mainland China |
Setup Instructions
The Retro Monkey Lamp is designed for easy setup. Follow these steps for your specific model:
1. Unpacking
- Carefully remove all components from the packaging.
- Inspect the lamp for any signs of damage. If damaged, do not proceed with installation and contact customer support.
2. Bulb Installation
- Ensure the lamp is unplugged.
- Gently screw an E26 base light bulb (30-60W, not included) into the lamp holder held by the monkey figure. Do not overtighten.
3. Placement and Mounting
For Sitting (Table) Model:
- Place the monkey lamp on a stable, flat, and dry surface, such as a table, desk, or shelf.
- Ensure the power cord can reach a wall outlet without being stretched or obstructed.
For Hanging (Wall) Model:
- Identify a suitable location on a wall for mounting. Ensure the wall material can support the lamp's weight and that the power cord can reach an outlet.
- Securely mount the monkey figure to the wall using appropriate hardware (screws, anchors, etc., not included). The design typically allows for the monkey's hand or feet to be used as mounting points.
- Route the power cord neatly and safely to a nearby wall outlet.
Operating Instructions
- Once the lamp is properly set up and a bulb is installed, plug the power cord into a standard 110V US wall outlet.
- Locate the push-button switch on the power cord.
- Press the switch to turn the lamp ON.
- Press the switch again to turn the lamp OFF.
Maintenance
- Cleaning: To clean the lamp, ensure it is unplugged from the power source. Wipe the resin body with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or immerse any part of the lamp in water.
- Bulb Replacement: Always unplug the lamp before replacing the bulb. Allow the old bulb to cool completely before removing it. Screw in the new E26 bulb gently.
- Cord Inspection: Periodically check the power cord and plug for any signs of wear, cuts, or damage. If damage is found, discontinue use and seek professional repair or replacement.
Troubleshooting
- Lamp Not Turning On:
- Ensure the power cord is securely plugged into a working wall outlet.
- Check if the light bulb is correctly installed and not burnt out. Try replacing the bulb with a known working one.
- Verify that the wall outlet is receiving power by testing it with another appliance.
- Light Flickers:
- Ensure the light bulb is screwed in tightly.
- Try a different light bulb, as the current bulb might be faulty.
- Lamp Overheats:
- Ensure you are using a bulb within the specified wattage range (30-60W).
- Provide adequate ventilation around the lamp.
User Tips
- Bulb Selection: For a truly retro aesthetic that complements the lamp's design, consider using an Edison-style LED bulb. These bulbs offer a warm glow and are energy-efficient.
- Creative Placement: Experiment with different placements. The hanging model can create a playful illusion of the monkey climbing, while the sitting model adds character to any flat surface.
Warranty and Support
For any warranty claims, technical support, or inquiries regarding your Retro Monkey Lamp, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any claims.
