SMAEL 8029

Contents

SMAEL 8029 Multifunctional Sport Watch

User Instruction Manual

Model: 8029 | Brand: SMAEL

1. Introduction

The SMAEL 8029 is a robust and multifunctional sport watch designed for active individuals. It features a dual analog-digital display, providing both classic and modern timekeeping. Equipped with an LED backlight, stopwatch, alarm, and complete calendar, this watch is built to withstand various environments with its shock-resistant and 50-meter water-resistant design. This manual will guide you through the features and operation of your new SMAEL 8029 watch.

2. Key Features

  • Dual Movement: Analog and Digital time display.
  • Water Resistance: 50M (5 ATM) suitable for swimming and showering (not for hot water or diving).
  • LED Backlight: For clear visibility in low-light conditions.
  • Multifunctionality: Includes Stopwatch (Chronograph), Alarm, Repeater, Complete Calendar, and Multiple Time Zones.
  • Shock Resistant: Durable construction to withstand impacts.
  • Durable Materials: Plastic case, Acrylic dial window, Stainless Steel back cover, and Rubber band.
SMAEL 8029 Sport Watch features: Nowtime, 50M Water-Proof, Run Second Mode, Cold Light Display, Date Display, Alarm, Shock Resistant, Week Showed.
Overview of SMAEL 8029 Sport Watch features including water resistance and shock resistance.

3. Specifications

Detailed diagram of SMAEL 8029 watch parameters including dimensions, weight, water resistance, and materials.
Detailed parameters and dimensions of the SMAEL 8029 watch.
SMAEL 8029 Product Specifications
Attribute Value
Brand Name SMAEL
Model Number 8029
Display Type Analog-Digital
Movement Digital (Japan Original Digital Movement)
Water Resistance Depth 5Bar (50 meters)
Case Material Plastic
Case Thickness 18mm
Dial Diameter 53mm
Dial Window Material Type Acrylic (Plexiglass)
Band Material Type Rubber (TPU)
Band Width 22mm
Band Length 23cm (Watch Chief: 254mm)
Wearing Diameter 140mm-230mm
Clasp Type Buckle
Case Shape Oval
Weight 78g
Features Back Light, Shock Resistant, LED Display, Repeater, Chronograph, Complete Calendar, Multiple Time Zone, Alarm
Battery Included Yes

4. Initial Setup

Your SMAEL 8029 watch comes with a pre-installed battery. Upon first use, you may need to set the time and date.

4.1 Button Functions Overview

Diagram labeling the watch's buttons and display areas: Time Display, The Second Hand Shows, Luminous Buttons, Start/Stop, Alarm Clock Mode, Date Display, Nowtime, Hour Hand Button, Switcher Mode, Adjust Button, Timing Reset.
Identification of watch buttons and display functions.
  • Luminous Buttons: Activates the LED backlight.
  • Start/Stop: Used for chronograph (stopwatch) functions.
  • Hour Hand Button: Adjusts the analog hour hand.
  • Adjust Button: Enters and exits setting modes for digital display.
  • Switcher Mode: Cycles through different digital display modes (Time, Alarm, Stopwatch).
  • Timing Reset: Resets the stopwatch.

4.2 Setting Digital Time and Date

  1. Press the Adjust Button (typically bottom-left) until the digital display starts flashing, indicating it's in setting mode.
  2. Use the Switcher Mode Button (typically bottom-right) to cycle through the settings (seconds, hour, minute, month, date, day of week).
  3. Use the Start/Stop Button (typically top-right) to increase the flashing value.
  4. Once all settings are correct, press the Adjust Button again to exit the setting mode.

4.3 Setting Analog Time

  1. Pull out the Hour Hand Button (crown on the right side).
  2. Rotate the crown to adjust the analog hands to the desired time.
  3. Push the crown back in to secure the analog time.

5. Operating Instructions

5.1 Using the LED Backlight

Press the Luminous Button (typically top-left) to illuminate the digital display for easy reading in dark conditions. The backlight will typically stay on for a few seconds.

Image showing the watch's daytime display and night light display with LED illumination.
Daytime and Night Light display modes of the SMAEL 8029 watch.

5.2 Stopwatch (Chronograph) Function

  1. Press the Switcher Mode Button to navigate to the stopwatch mode (usually indicated by 'ST' or 'CHRO').
  2. Press the Start/Stop Button to start the stopwatch.
  3. Press the Start/Stop Button again to pause/resume the stopwatch.
  4. To reset the stopwatch, press the Timing Reset Button (typically bottom-left) while the stopwatch is paused.

5.3 Alarm Function

  1. Press the Switcher Mode Button to navigate to the alarm mode (usually indicated by 'AL').
  2. Press the Adjust Button until the alarm time starts flashing.
  3. Use the Switcher Mode Button to select hours or minutes.
  4. Use the Start/Stop Button to adjust the alarm time.
  5. Press the Adjust Button to confirm and exit the alarm setting mode.
  6. To turn the alarm ON/OFF, press the Start/Stop Button while in alarm mode (without flashing).

5.4 Dual Time Display

The watch simultaneously displays analog and digital time. The digital display can be set independently to a different time zone if desired, allowing for easy tracking of two different times.

6. Care and Maintenance

  • Cleaning: Wipe the watch regularly with a soft, dry cloth. For the rubber band, a mild soap and water solution can be used, then rinse thoroughly and dry.
  • Water Resistance: While the watch is 50M water-resistant, avoid pressing buttons underwater. Do not expose the watch to hot water (e.g., hot showers, saunas) as this can compromise the seals.
  • Temperature: Avoid extreme temperatures, both hot and cold, as they can affect battery life and watch accuracy.
  • Chemicals: Keep the watch away from solvents, detergents, perfumes, and other chemicals that may damage the case or band.
  • Impact: Although shock-resistant, avoid unnecessary strong impacts to prolong the watch's lifespan.
  • Battery Replacement: When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have this done by a professional to ensure water resistance is maintained.
Close-up of the watch's stainless steel back cover, indicating water resistance and model number.
Stainless steel back cover of the SMAEL 8029 watch.
Side view of the watch showing the multifunction buttons.
Multifunction buttons on the side of the watch case.

7. Troubleshooting

Common Issues and Solutions
Problem Possible Cause Solution
Digital display is blank or dim. Low battery. Replace the battery.
Analog hands are not moving or incorrect. Crown pulled out; battery low for analog movement. Push the crown back in. If still not working, replace battery.
Water inside the watch. Buttons pressed underwater; exposure to hot water; damaged seal. Stop using immediately and seek professional repair to prevent further damage.
Buttons are unresponsive. Stuck button; internal malfunction. Gently try to free the button. If still unresponsive, contact support.

8. User Tips

  • Check Dimensions: Always refer to the detailed specifications (e.g., dial diameter 53mm, case thickness 18mm) to ensure the watch size meets your expectations, as product images can sometimes be misleading regarding scale.
  • Water Resistance Reminder: While rated for 50M, it's best practice to avoid prolonged submersion or exposure to high-pressure water jets to maximize the lifespan of the seals.
  • Button Operation: The multifunction buttons are designed for durability. Ensure firm but gentle presses when adjusting settings.

9. Warranty and Support

Your SMAEL 8029 watch comes with a warranty card. Please refer to the card for specific warranty terms and conditions, including coverage period and what is covered. For any issues not covered in this manual or for professional servicing, please contact the retailer or an authorized SMAEL service center.

Keep your warranty card and proof of purchase in a safe place.

© 2024 SMAEL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.