1. Introduction
The JONSBO Z20 is a compact MATX case designed for users seeking a small footprint without compromising on hardware compatibility or cooling performance. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the best experience from your Z20 case.

Figure 1.1: JONSBO Z20 MATX Case (Black and White versions)
2. Package Contents
Please check the contents of your Z20 package against the list below:
- Z20 Computer Case
- Handle combination kit
- Graphics card support bracket combination kit
- 3.5-inch HDD mounting bracket
- Dual 2.5-inch SSD mounting bracket
- Dust proof filter (installed at the back of the chassis)
- SFX TO ATX power conversion bracket
- Screw box / User guide

Figure 2.1: Overview of Z20 attachments
3. Specifications
| Feature | Specification |
|---|---|
| Dimensions (w/o handle/feet) | 370mm (D) x 186mm (W) x 295mm (H) |
| Dimensions (with handle/feet) | 382mm (D) x 198mm (W) x 335mm (H) |
| Motherboard Support | Mini-ITX / Micro-ATX |
| Expansion Slots | 4 |
| Case Material | SPCC Steel, Tempered Glass |
| Weight | Net: 5kg / Gross: 6.5kg |
| CPU Air Cooler Clearance | Up to 164mm (Intel) / 163mm (AMD) |
| Radiator Clearance | Top, up to 240mm |
| GPU Clearance | Up to 363mm (hardware dependent) |
| ATX PS2 PSU Clearance | Up to 180mm (recommended ≤140mm) |
| SFX PSU Support | SFX / SFX-L |
| Front I/O Ports | USB 3.2 Gen 1 Type-A x1, USB 3.2 Gen 2 Type-C x1, Headset Audio Jack x1 |
| Internal 2.5" Drive Bays | Up to 3 |
| Internal 3.5" Drive Bays | Up to 1 |
| Top Fan Support | 2 x 120mm / 2 x 140mm |
| Rear Fan Support | 1 x 120mm / 1 x 92mm |
| Bottom Fan Support | 2 x 120mm / 2 x 140mm |
4. Setup and Installation
Follow these steps to assemble your JONSBO Z20 case and install your PC components. For detailed diagrams, refer to the official user guide PDF available at JONSBO Z20 User Manual (PDF).
4.1. Pre-Installation Preparations
- Remove Side Panels: Unscrew and slide off both side panels to access the interior.
- Remove Internal Baffle (if present): Some configurations may require removing an internal baffle for easier access or specific component installation.
- Remove ATX Power Supply Bracket (if using SFX): If you plan to use an SFX power supply, remove the pre-installed ATX PSU bracket.
- Remove Radiator/Fan Bracket: For top cooling installation, remove the top bracket.

Figure 4.1: Side Panel Removal
4.2. Power Supply Installation
The Z20 supports both ATX and SFX power supplies with flexible mounting options.
- ATX Power Supply Vertical Mounting: The case supports 4-level height adjustment (P1-P4) for ATX PSUs to accommodate different hardware configurations.
- SFX Power Supply Side Mounting: SFX PSUs can be mounted on the side, which is ideal for water cooling and graphics card hardware without interference.

Figure 4.2: Optional Power Supply Installation Modes
Refer to the compatibility table for specific GPU and cooling configurations with different PSU lengths.

Figure 4.3: Hardware Installation Compatibility Comparison Table
4.3. Motherboard Installation
- Install the I/O shield (if applicable) onto the case.
- Align your Mini-ITX or Micro-ATX motherboard with the standoffs and secure it with screws.
- Connect the front panel I/O cables (USB, audio, power/reset switches) to the corresponding headers on your motherboard.
4.4. Drive Installation (HDD/SSD)
The Z20 supports various drive configurations:
- 2.5-inch SSDs: Up to three 2.5-inch SSDs can be installed on the back side or bottom of the case.
- 3.5-inch HDDs: One 3.5-inch HDD can be installed at the bottom.

Figure 4.4: 2.5-inch SSD Installation

Figure 4.5: 3.5-inch HDD Bottom Installation
4.5. Graphics Card Installation
The Z20 supports high-performance graphics cards up to 363mm in length. It features innovative removable PCI-E fixed parts to optimize installation for long graphics cards.

Figure 4.6: Innovative Removable PCI-E Fixed Parts
A standard adjustable graphics card support bracket is included to prevent sagging of long GPUs.

Figure 4.7: Standard Adjustable Graphics Card Support Bracket
4.6. Cooling System Installation
The Z20 offers versatile cooling options:
- Fans: Supports up to 5 cooling fans (top: 2x140mm, rear: 1x120mm/92mm, bottom: 2x140mm).
- Water Cooling: Supports 240mm high-performance water-cooled radiators (cold discharge thickness <30mm).
- Air Cooling: Compatible with high-performance air-cooled tower heat sinks up to 160mm.

Figure 4.8: Fan Configuration Options

Figure 4.9: 240mm Water-cooled Installation
4.7. Handle Installation
The Z20 features a 2mm thick detachable handle for portability. It connects via screwless hooks.

Figure 4.10: Detachable Handle Components
4.8. Cable Management
The Z20 includes a 22mm deep dedicated back stitching channel with 3 cable limit Velcro straps to help organize cables and relieve cable anxiety.

Figure 4.11: Cable Management Channel
5. Operating Your PC Case
Once all components are installed, ensure all cables are properly connected and secured. The Z20 is designed with a through-type short air duct and large square mesh holes to maintain efficient system operation by quickly discharging accumulated heat from the CPU and GPU.

Figure 5.1: Through-type Short Air Duct for Efficient Cooling
Video 5.1: JONSBO Z20 Computer Case Overview
6. Maintenance
To ensure optimal performance and longevity of your Z20 case:
- Dust Filters: The main air inlet and outlet are equipped with magnetic dust filters. Regularly remove and clean these filters to prevent dust buildup and maintain airflow.
- Cleaning: Use a soft, dry cloth to clean the exterior of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth.
- Internal Dust: Periodically use compressed air to clear dust from internal components and fans.

Figure 6.1: Magnetic Suction Dust Filter
7. Troubleshooting
If you encounter issues during or after assembly, consider the following:
- Component Fit: If a component does not fit, double-check its dimensions against the case specifications (Section 3) and the compatibility table (Figure 4.3). Ensure all necessary brackets or parts have been removed or adjusted.
- Cooling Issues: Verify that all fans are spinning correctly and are oriented for proper airflow. Ensure dust filters are clean.
- Power Issues: Check all power connections, especially from the PSU to the motherboard, CPU, and GPU. Ensure the PSU is switched on.
- Front I/O Not Working: Recheck the front panel I/O cable connections to the motherboard.
8. User Tips
- Fan Installation: The JONSBO Z20 case does not come with pre-installed fans. You will need to purchase and install fans separately to ensure adequate cooling for your components.
- Build Planning: Due to its compact size, careful planning of component order and cable routing is recommended during assembly.
- GPU Sag: Utilize the included adjustable graphics card support bracket to prevent GPU sag, especially with longer or heavier graphics cards.
- Portability: The detachable handle makes the Z20 highly portable, ideal for LAN parties or moving your setup.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or visit the official JONSBO website. Keep your proof of purchase for warranty claims.