RADIOMASTER Nomad Dual Band RF Module

Contents

Radiomaster Nomad Dual Band RF Module Instruction Manual

Model: Nomad Dual Band RF Module | Brand: RADIOMASTER

1. Introduction

The Radiomaster Nomad is an advanced ExpressLRS RF module designed for remote control applications, particularly drones and RC aircraft. It features dual 1-watt transceivers operating across both 2.4GHz and 868/900MHz frequencies, utilizing the innovative Gemini Xrossband protocol for enhanced signal integrity and reliability. This module is engineered to provide exceptional range and interference rejection, ensuring stable connectivity even in challenging environments.

Video: Radiomaster Nomad ExpressLRS Module Overview

2. Safety Information

⚠️️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

This product is not electrified and contains no high-concerned chemicals. Always ensure proper handling and installation to prevent damage to the module or connected devices.

3. Features

  • Equipped with dual 3rd-generation Semtech LR1121 RF transceivers.
  • Supports both 2.4GHz and 868/900MHz frequencies.
  • Utilizes advanced Gemini Xrossband protocol for simultaneous dual-band packet transmission.
  • Twin 1-watt independent transmitters for extreme range and dependability.
  • Rugged aluminum housing acts as a heatsink for efficient heat dissipation.
  • High-efficiency cooling system to maintain optimal performance.
  • Built-in Wi-Fi and Bluetooth for seamless connectivity and easy updates.
  • Includes Micro and Nano module adapters for broad compatibility with various radio transmitters.
  • Compatible with all existing 2.4GHz and 900MHz ExpressLRS receivers.
  • Compatible with 2.4GHz + 900MHz Dual band (Gem-X) ExpressLRS receivers.
  • Built-in RGB light strip.

4. Package Contents

Please check the package for the following items:

  • 1 * Nomad Dual Band Module
  • 1 * Micro Adapter
  • 2 * Dual Band 2.4GHz / 900 MHz Antennas
  • 1 * Nano Adapter
  • 1 * Manual card

5. Specifications

AttributeValue
ItemNomad Dual Band Module with Micro Adapter
Regulatory DomainISM_2.4, FCC_915
MCUESP32 (main), ESP32c3 (aux, as ESP backpack)
RF ChipSemtech LR1121 x 2
RFDual 1000mW | Dual band Gemini ELRS
Frequency Range2400 MHz - 2479 MHz / 903MHz - 927MHz
Maximum Packet Rate500Hz (1000Hz coming soon in ExpressLRS V3.5)
Minimum Receiver Refresh Rate50Hz
RF Output Power1000mW x 2
Module Bay AdaptersMicro standard 5pin socket & Nano standard 8pin socket
Wi-Fi SupportYes
Bluetooth SupportYes
Power Supply Voltage (XT30)DC 6V - 16.8V
Weight (with antenna)87.20g
Weight (without antenna)71.10g
Dimension (without antenna)80*45*40mm
Compatible Drone BrandDJI
OriginMainland China
Radiomaster Nomad module on a digital scale, displaying 71.1g.

Image: Radiomaster Nomad module on a digital scale, displaying 71.1g.

6. Setup

  1. Module Installation:
    • Identify the correct adapter for your radio transmitter (Micro or Nano). The Nomad comes with both a Micro standard 5-pin socket and a Nano standard 8-pin socket.
    • Attach the appropriate adapter to the Nomad module.
    • Insert the assembled module into the module bay of your radio transmitter.
    Side view of the Nomad module showing 'GEMINI XROSSBAND' branding.

    Image: Side view of the Nomad module showing 'GEMINI XROSSBAND' branding.

  2. Antenna Connection:
    • Carefully screw the two dual-band 2.4GHz / 900MHz antennas onto the connectors on top of the Nomad module. Ensure they are finger-tight.
    Front view of the Radiomaster Nomad Dual Band RF Module with antennas.

    Image: Front view of the Radiomaster Nomad Dual Band RF Module with antennas.

  3. Power Supply:
    • The Nomad module requires a DC 6V - 16.8V power supply, typically connected via an XT30 connector. Ensure your power source meets these specifications.
    Close-up of the DC 6-16.8V power input and USB port on the Nomad module.

    Image: Close-up of the DC 6-16.8V power input and USB port on the Nomad module.

  4. Receiver Pairing (DBR4/XR1):
    • The DBR4 ExpressLRS receiver is designed for perfect compatibility with the Nomad. For detailed pairing instructions, refer to the specific documentation for your chosen ExpressLRS receiver (e.g., DBR4 or XR1 Nano).
    DBR4 ExpressLRS Receiver with 20mm x 20mm mounting dimensions.

    Image: DBR4 ExpressLRS Receiver with 20mm x 20mm mounting dimensions.

    RM XR1 Nano Receiver ELRS 2.4G.

    Image: RM XR1 Nano Receiver ELRS 2.4G.

7. Operating Instructions

The Nomad module operates using the ExpressLRS firmware, offering various packet rates and modes for optimized performance.

7.1. Packet Rates and Modes

  • Sub-GHz 250Hz (-111dBm): Provides faster packet rates with enhanced sub-GHz performance.
  • Sub-GHz 200Hz Full (-111dBm): Optimized for Mavlink users, doubling the packet rate of current 900 SX1276 hardware for a more robust link and reduced interference.
  • Dual Band X150Hz (-112dBm) (Gemini Mode): Experience simultaneous sub-GHz and 2.4GHz transmissions, providing robust performance and reduced interference with a packet rate of 150Hz.
  • Dual Band X100Hz Full (-112dBm) (Enhanced Gemini Mode): Achieves dual-frequency transmission benefits at a 100Hz packet rate with full 16 channel resolution, ensuring strong and stable connectivity.

7.2. K Modes (Coming in ExpressLRS V3.5)

  • DK500: Designed for speed and RC reliability, featuring next-generation FSK modulation with built-in packet repair (Forward Error Correction). Sends repeat packets to reduce packet loss in challenging race environments.
  • K1000 Full SubGHs: Offers 1000Hz in the 868/900MHz domain, designed for maximum data throughput, especially with MAVLink.

For detailed configuration and mode selection, refer to the official ExpressLRS documentation and your radio transmitter's manual.

8. Maintenance

8.1. Cooling System

The Nomad module features a rugged aluminum housing that acts as a heatsink, combined with an efficient cooling system. To ensure optimal performance and longevity, keep the module's cooling fins clear of obstructions. Avoid operating in excessively dusty or high-temperature environments that could impede airflow.

8.2. Firmware Updates

The Nomad supports firmware updates via Wi-Fi and Bluetooth. Regularly check the official ExpressLRS and Radiomaster websites for the latest firmware versions to benefit from new features, improvements, and bug fixes. Follow the provided instructions for a safe and successful update process.

9. Troubleshooting

  • No Power: Ensure the XT30 power supply is correctly connected and providing the specified voltage (DC 6V - 16.8V). Check for any loose connections in the module bay.
  • No Signal/Poor Range: Verify that antennas are securely attached. Ensure the module and receiver are running compatible ExpressLRS firmware versions. Check for environmental interference.
  • Binding Issues: Confirm that both the module and receiver are in binding mode and within close proximity. Refer to the ExpressLRS binding procedure.
  • Overheating: If the module feels excessively hot, ensure the cooling fins are clean and unobstructed. Reduce output power if operating in extreme conditions.

For more advanced troubleshooting or specific ExpressLRS related issues, consult the comprehensive ExpressLRS documentation and community forums.

10. User Tips

  • The Nomad module is noted for its seamless switching between low band (900MHz) and 2.4GHz, providing excellent signal reliability.
  • Users have reported impressive range, with stable link quality even at distances up to 3km.
  • The Gemini and GemX functionality is highly praised for its performance in demanding conditions.
  • When purchasing, verify if the module is the LBT (Listen Before Talk) version or FCC, as regional regulations may vary.

11. Warranty and Support

For warranty information and technical support, please refer to the official Radiomaster website or contact your authorized dealer. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.