Alynic BT-B19

Contents

Alynic BT-B19 Bluetooth 5.0 Audio Transmitter Receiver User Manual

Model: BT-B19 | Brand: Alynic

1. Introduction

Thank you for choosing the Alynic BT-B19 Bluetooth 5.0 Audio Transmitter Receiver. This versatile device allows you to wirelessly transmit and receive audio signals, enhancing your listening experience with high-quality sound and low latency. To ensure safe use and extend the product's lifespan, please carefully read this manual before use and keep it for future reference. This manual covers the functions and operation of the BT-B19 model.

The BT-B19 is suitable for connecting, charging, transmitting, expanding, and assisting electronic products such as mobile phones, computers, televisions, speakers, projectors, and game consoles.

2. Product Overview

2.1 Key Features

  • Advanced Chipset: Equipped with the premium CSR8675 chip, supporting Bluetooth V5.0 for stable and efficient wireless transmission.
  • aptX HD & Low Latency: Supports aptX HD for CD-quality sound and aptX Low Latency (below 40ms) for real-time audio transmission, eliminating lip-sync delay.
  • Dual Mode (TX/RX): Functions as both a Bluetooth transmitter (TX) to stream audio from non-Bluetooth devices to Bluetooth headphones/speakers, and a Bluetooth receiver (RX) to stream audio from Bluetooth devices to wired speakers/headphones.
  • Multiple Connection Methods: Supports 3.5mm AUX, RCA, and Digital Optical Toslink (SPDIF) input/output interfaces.
  • Long Battery Life: Built-in 600mAh lithium-ion polymer battery provides over 20 hours of working time (up to 26 hours in TX mode, 22 hours in RX mode) after approximately 3 hours of charging. Supports charging while in use.
  • Dual Connection: In TX mode, pair with two Bluetooth headsets simultaneously. In RX mode, pair with two smart devices to play different songs.
  • Automatic Reconnection: Can remember up to 8 devices and automatically reconnect to existing ones.
  • ANC Noise Reduction: Features CSR's latest ANC noise reduction and echo cancellation technology.
  • TWS Support: Supports True Wireless Stereo (TWS) for left and right channel separation.

2.2 Package Contents

The package includes the following items:

  • 1 x Alynic BT-B19 Bluetooth Transmitter & Receiver Adapter
  • 1 x Micro USB Charging Cable
  • 1 x 3.5mm Audio Cable
  • 1 x 3.5mm Jack to 2 RCA Plug Cables
  • 1 x Digital Optical Toslink Audio Cable
  • 1 x User Manual (this document)
  • 1 x Retail Box
Alynic BT-B19 product packaging and contents, including the device, various audio cables, and a user manual.

Figure 1: Alynic BT-B19 Product and Package Contents

3. Specifications

Feature Specification
Model BT-B19
Battery Capacity 600mAh lithium-ion polymer battery
Bluetooth Version V5.0 Class II
Charging Input DC 5V / ≥300mA
Charging Time About 3 Hours
Operating Temperature -10°C to 55°C
Working Time (RX) Up to 22 hours
Working Time (TX) Up to 26 hours
Bluetooth Chipset CSR BC8675
Transmission Distance 10m (open space)
Bluetooth Profile Support RX: A2DP AVRCP; TX: A2DP
Weight About 45g
Size 63*63*20mm
CODEC TX: apt-X HD, apt-X LL, apt-X, SBC, AAC; RX: apt-X HD, apt-X LL, apt-X, SBC
Alynic BT-B19 Bluetooth 5.0 Transmitter Receiver device with included cables.

Figure 2: Alynic BT-B19 Device Overview

4. Safety Precautions

Please observe the following safety guidelines to prevent damage to the product or personal injury:

  1. Use the device in a dry, ventilated, room temperature environment. Keep it away from high temperatures, humidity, fire sources, water sources, and strong magnetic fields to prevent short circuits, aging, or damage.
  2. Do not disassemble, modify, squeeze, drop, or forcefully pull the product without authorization. This can lead to malfunctions, electrical leakage, or safety hazards.
  3. For charging and power supply, use standard and compliant power adapters. Avoid overloading, overvoltage, and overcharging.
  4. When plugging or unplugging interfaces, always hold the connector itself, not the wire, to prevent internal breakage.
  5. Children and minors should use the product under adult supervision to prevent entanglement, ingestion, collision, or electric shock risks.
  6. If the product exhibits abnormal odor, deformation, overheating, or wire breakage, stop using it immediately and contact customer service.

5. Setup and Connection

5.1 Preparation Before Use

  1. Confirm that the accessory interface matches your device's interface model and has the correct orientation. Avoid forcefully plugging or unplugging to prevent damage.
  2. Check the appearance of all accessories for any damage, deformation, or looseness.
  3. Before connecting, ensure all interfaces are clean, dry, and free of dust or foreign objects.

5.2 General Usage Method

  1. Connection: Insert the corresponding cable (3.5mm AUX, RCA, or Optical) smoothly into the device and your audio source/destination. Ensure it is firmly plugged in.
  2. Power On: Turn on the BT-B19 device using the power switch.
  3. Mode Selection: Use the TX/RX mode switch on the side of the device to select the desired operating mode (Transmitter or Receiver).
  4. Pairing: Follow the specific pairing instructions for your chosen mode (TX or RX) as detailed in the next section.
  5. Function Operation: Adjust settings, pair, and connect according to the specific function you wish to use.
  6. Stop Using: Turn off the device power first, then unplug the accessories and store them properly.
Close-up of the Alynic BT-B19 device with labels for Power switch, LED power light, Micro-USB charging port, Digital audio input for RX, Digital audio input for TX, SPDIF/AUX switch, and 3.5mm AUX port for TX/RX.

Figure 3: BT-B19 Device Ports and Controls

6. Operating Modes

The BT-B19 operates in two main modes: Transmitter (TX) and Receiver (RX).

6.1 Transmitter (TX) Mode

In TX mode, the BT-B19 transmits audio from a non-Bluetooth device (e.g., TV, PC, projector) to Bluetooth-enabled headphones or speakers.

  1. Connect the BT-B19 to your audio source (TV, PC, etc.) using the appropriate cable (3.5mm AUX or Optical SPDIF OUT).
  2. Switch the device to TX mode using the TX/RX switch.
  3. Turn on your Bluetooth headphones or speakers and put them into pairing mode.
  4. The BT-B19 will automatically search for and connect to nearby Bluetooth audio devices. The LED indicator will show pairing status.
  5. Once connected, audio from your source device will be streamed to your Bluetooth headphones/speakers.
  6. Dual Connection: To connect a second pair of Bluetooth headphones/speakers, put the second device into pairing mode after the first is connected. The BT-B19 will attempt to connect to it.
Diagram illustrating connection examples for Transmitter (TX) mode (TV, computer, projector to Bluetooth audio/headset) and Receiver (RX) mode (phone, tablet, PC to Bluetooth audio/vehicle stereo).

Figure 4: TX and RX Mode Connection Examples

Image showing two people watching TV with Bluetooth headphones, demonstrating Dual Headphones/Speakers Support.

Figure 5: Dual Headphones Support in TX Mode

6.2 Receiver (RX) Mode

In RX mode, the BT-B19 receives audio from a Bluetooth-enabled device (e.g., smartphone, tablet, PC) and outputs it to a wired audio system (e.g., wired speakers, car stereo, wired headphones).

  1. Connect the BT-B19 to your wired audio system using the appropriate cable (3.5mm AUX or Optical SPDIF IN).
  2. Switch the device to RX mode using the TX/RX switch.
  3. On your Bluetooth-enabled device (smartphone, tablet), enable Bluetooth and search for

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.