MAXSUN Challenger B760M-F DDR4 Desktop PC Motherboard User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MAXSUN Challenger B760M-F DDR4 Desktop PC Motherboard. Please read this manual thoroughly before attempting to install or use the motherboard to ensure proper functionality and to prevent damage.

The MAXSUN Challenger B760M-F is designed for desktop personal computers, offering a stable and efficient platform for various computing needs. It supports DDR4 memory and is based on the Intel B760 chipset, compatible with Intel LGA 1700 socket processors.

2. Safety Information

Always observe the following safety precautions when handling or installing the motherboard:

• Static Electricity: Electronic components are sensitive to electrostatic discharge (ESD). Always wear an anti-static wrist strap or frequently touch a grounded metal object before handling the motherboard.
• Power Off: Ensure the power supply is disconnected from the wall outlet before installing or removing any components.
• Handle with Care: Hold the motherboard by its edges and avoid touching components, pins, or circuit traces.
• Ventilation: Ensure adequate ventilation within your PC case to prevent overheating.
• Liquid and Moisture: Keep the motherboard away from liquids and moisture.

3. Package Contents

Upon opening the package, please verify that all items are present and in good condition:

• MAXSUN Challenger B760M-F Motherboard
• I/O Shield
• SATA Data Cables (quantity may vary)
• User Manual (this document)
• Driver CD/USB (if included)

4. Specifications

Note: The provided product data indicates that specifications may be inaccurate. Please consult the manufacturer's official website or seller for the most precise and up-to-date specifications for your specific model.

The following are typical specifications for a MAXSUN Challenger B760M-F DDR4 motherboard:

5. Installation and Setup

Follow these steps carefully to install your motherboard and essential components:

5.1 Pre-Installation Checklist

• Ensure your PC case is compatible with the Micro-ATX form factor.
• Gather all necessary components: CPU, CPU cooler, RAM, graphics card, storage devices (SSD/HDD), power supply.
• Prepare your workspace: clean, well-lit, and static-free.

5.2 Installing the CPU

1. Locate the LGA 1700 CPU socket on the motherboard.
2. Open the CPU socket lever and lift the metal load plate.
3. Carefully align the CPU with the socket, matching the golden triangle/notch on the CPU with the indicator on the socket. Do NOT force the CPU into the socket.
4. Lower the load plate and secure it by pushing down the lever until it clicks into place.

5.3 Installing the CPU Cooler

Follow the instructions provided with your specific CPU cooler. Ensure thermal paste is applied correctly before mounting the heatsink and fan assembly.

5.4 Installing RAM (DDR4 Modules)

1. Locate the DDR4 DIMM slots. For dual-channel performance, refer to your motherboard's silkscreen or manual for recommended slot pairing (e.g., A2 and B2).
2. Open the clips at both ends of the DIMM slot.
3. Align the RAM module with the slot, ensuring the notch on the module matches the key in the slot.
4. Press down firmly on both ends of the RAM module until the clips snap into place.

5.5 Installing M.2 SSDs (if applicable)

1. Locate the M.2 slot(s) on the motherboard.
2. Remove the M.2 standoff screw.
3. Insert the M.2 SSD into the slot at an angle.
4. Gently push down the SSD and secure it with the standoff screw.

5.6 Mounting the Motherboard in the Case

1. Install the I/O shield into the rear opening of your PC case.
2. Align the motherboard with the standoffs in your PC case.
3. Secure the motherboard with screws, ensuring it is firmly seated.

5.7 Connecting Power and Peripherals

• Connect the 24-pin ATX power connector from your power supply to the motherboard.
• Connect the 8-pin (or 4-pin) CPU power connector to the motherboard.
• Connect SATA data cables from your storage devices to the SATA ports on the motherboard.
• Connect front panel connectors (Power SW, Reset SW, HDD LED, Power LED, USB, Audio) to their respective headers on the motherboard. Refer to the motherboard diagram for exact pinouts.
• Install your graphics card into the PCIe x16 slot and connect any necessary PCIe power cables from the power supply.

6. Operating Instructions

6.1 First Boot and BIOS/UEFI Setup

1. After connecting all components and peripherals, power on your PC.
2. Press the designated key (usually DEL or F2) repeatedly during startup to enter the BIOS/UEFI setup utility.
3. In the BIOS/UEFI, you can configure boot order, enable XMP for RAM, adjust fan speeds, and monitor system status. Save changes and exit.

6.2 Operating System Installation

Insert your operating system installation media (USB drive or DVD) and follow the on-screen prompts to install your preferred OS.

6.3 Driver Installation

After OS installation, install the necessary drivers for your motherboard's chipset, LAN, audio, and any other integrated components. These can typically be found on the manufacturer's website or the included driver media.

7. Maintenance

• Keep it Clean: Regularly clean your PC case and motherboard components using compressed air to remove dust buildup, which can hinder cooling and performance.
• BIOS/UEFI Updates: Periodically check the MAXSUN website for BIOS/UEFI updates. Updates can improve stability, compatibility, and add new features. Follow the update instructions carefully to avoid damaging the motherboard.
• Driver Updates: Keep your system drivers updated for optimal performance and security.

8. Troubleshooting

8.1 No Power / No POST (Power-On Self-Test)

• Check all power connections (24-pin ATX, 8-pin CPU) are securely seated.
• Ensure the power supply is switched on and connected to a working outlet.
• Verify the front panel power switch connector is correctly installed on the motherboard header.
• Try booting with only essential components (CPU, one RAM stick, CPU cooler) to isolate the issue.

8.2 No Display Output

• Ensure your monitor is connected to the correct video output (either integrated graphics on the motherboard or your dedicated graphics card).
• Reseat the graphics card and RAM modules.
• Test with a different monitor or cable if possible.

8.3 Operating System Not Booting

• Check the boot order in BIOS/UEFI to ensure your primary storage device is selected.
• Verify that your storage device (SSD/HDD) is properly connected and detected in BIOS/UEFI.
• If recently installed, ensure the OS was installed correctly.

9. User Tips

• Cable Management: Good cable management not only makes your PC look tidier but also improves airflow, contributing to better cooling and system stability.
• BIOS Settings: Explore your BIOS/UEFI settings. Features like XMP (Extreme Memory Profile) can significantly boost RAM performance, and fan control settings can help optimize cooling and noise levels.
• Component Compatibility: Always double-check the compatibility of new components (CPU, RAM, GPU) with your motherboard before purchase.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Manufacturer Contact Information:

• Email: ryan@wefound.net.cn
• Skype: 13512910981
• WhatsApp: +86 13512910981
• WeChat: 13512910981

Please note that contact information may be subject to change. Refer to the official MAXSUN website for the most current support details.