CYCLAMI CY200

Contents

CYCLAMI CY200 Smart Brake Sensing Bike Tail Light User Manual

Model: CY200

1. Introduction

Thank you for choosing the CYCLAMI CY200 Smart Brake Sensing Bike Tail Light. This manual provides essential information for the safe and effective use of your new tail light. Designed for both MTB and Road Bikes, the CY200 features intelligent brake sensing, IPX6 waterproofing, and convenient Type-C charging to enhance your cycling safety.

CYCLAMI CY200 Smart Brake Sensing Bike Tail Light

Image: CYCLAMI CY200 Tail Light, highlighting intelligent brake sensor and 14 high brightness light beads.

2. Safety Information

  • Always ensure the tail light is securely mounted before riding.
  • Do not look directly into the light when it is on, as it may cause temporary vision impairment.
  • Keep out of reach of children.
  • Do not disassemble or modify the product, as this may void the warranty and pose a safety risk.
  • Ensure the Type-C charging port cover is properly sealed to maintain IPX6 waterproof rating.

3. Package Contents

Please check the package for the following items:

  • 1 x CYCLAMI CY200 Bicycle Tail Light
  • 1 x Saddle Bracket
  • 1 x Type-C Charging Cable
  • 1 x Wrench Tool
  • 1 x Headlight Strap
  • Several Nylon Ribbons
CYCLAMI CY200 Package Contents

Image: Contents of the CYCLAMI CY200 Bicycle Tail Light package.

4. Specifications

FeatureDescription
BrandCYCLAMI
Model NumberCY200
TypeTail Light
Body MaterialABS
Power SupplyBattery (600mAh 3.7V)
Mounting PlacementSeatpost / Seat Bow
Waterproof LevelIPX6
Intelligent SensingYes (Brake Sensing, Auto Start/Stop)
Lighting Modes20 Combinations (e.g., Medium Bright, Low Bright, Running Light, Starlight Flash, Alternate Flash, Slow Flash, Fast Flash)
Brightness14PCS High Brightness Light Beads, 200 Lumens
Weight34g
Dimensions57mm x 35mm x 25mm
ChargingType-C, approx. 1.5 hours for full charge
CYCLAMI CY200 Product Parameters and Dimensions

Image: Detailed product parameters and dimensions of the CYCLAMI CY200.

5. Setup and Installation

The CYCLAMI CY200 offers dual mounting options for easy, tool-free installation:

  1. Seat Bow Installation: Use the provided saddle bracket to attach the light directly under your bicycle seat.
  2. Seatpost Mounting: Utilize the headlight strap and nylon ribbons to secure the light to your seatpost. (An optional seatpost holder may be required for some setups, but the provided strap and ribbons are generally sufficient).
CYCLAMI CY200 Dual Stand Installation Options

Image: Illustration of seat bow and seatpost installation methods.

6. Operating Instructions

Power On/Off

  • Press and hold the power button for 2 seconds to turn the light ON or OFF.

Intelligent Brake Sensing

The CY200 features a built-in high-precision sensor. When braking is detected, the tail light will automatically switch to a high brightness mode for 5 seconds to alert following traffic. This feature significantly enhances safety.

CYCLAMI CY200 Brake Sensor in Action

Image: The tail light activating high brightness upon detecting a brake.

Auto Start/Stop Function

The light is equipped with an automatic start/stop function:

  • Vibration Wake-up: The tail light will automatically turn on when it detects movement or vibration.
  • Automatic Shutdown: If the light remains still for 30 seconds, it will automatically shut down to conserve battery.
CYCLAMI CY200 Auto Start/Stop Function

Image: Illustration of the auto start/stop function, showing vibration wake-up and automatic shutdown after 30 seconds of stillness.

7. Lighting Modes

The CY200 offers 20 different lighting combinations for various riding conditions and preferences. The inner and outer ring lights can be controlled independently:

  • Inner Ring Light: Controlled by single clicks of the power button.
  • Outer Ring Light: Controlled by double-tapping the power button.

Experiment with single clicks and double-taps to cycle through modes such as Medium Bright, Low Bright, Running Light, Starlight Flash, Alternate Flash, Slow Flash, Fast Flash, and combinations with OFF states for either ring.

Video: Explanation of CY200 lighting modes and controls.

20 Light Combinations

Image: Text indicating 20 light combinations available.

8. Charging and Battery

The CY200 is equipped with a 600mAh 3.7V battery and charges via a Type-C port.

  • Charging Indication: A flashing red light indicates the device is charging.
  • Full Charge Indication: A green light indicates the battery is fully charged.
  • Charging Time: Approximately 1.5 hours for a full charge.
CYCLAMI CY200 Type-C Charging

Image: The CYCLAMI CY200 connected for Type-C charging, showing charging indicators.

9. Maintenance

  • Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Water Resistance: The IPX6 rating means it is protected against powerful water jets. Avoid submerging the device in water. Ensure the Type-C port cover is always securely closed.
  • Storage: Store the light in a cool, dry place when not in use. For long-term storage, charge the battery to about 50% every few months to prolong its lifespan.
CYCLAMI CY200 IPX6 Waterproof

Image: The CYCLAMI CY200 demonstrating its IPX6 waterproof capability in rainy conditions.

10. Troubleshooting

  • Light not turning on: Ensure the battery is charged. Press and hold the power button for 2 seconds.
  • Brake sensing not working: Check if the light is securely mounted and not obstructed. Ensure the intelligent sensing feature is active (if applicable, some modes might disable it).
  • Light not charging: Verify the Type-C cable and power source are working. Ensure the cable is properly inserted into the charging port.
  • Auto start/stop not responding: Ensure the light is in an appropriate mode that supports auto start/stop. Check for any physical obstructions or excessive vibrations that might interfere with the sensor.

11. User Tips

  • Battery Life: The 600mAh battery is designed to satisfy daily use. For longer rides, consider carrying a portable power bank for on-the-go charging.
  • Visibility: Utilize the various lighting modes to maximize your visibility based on ambient light conditions and traffic. Flashing modes are generally more noticeable during the day, while steady modes provide consistent illumination at night.
  • Mounting Angle: Adjust the mounting angle to ensure the light is clearly visible to vehicles behind you without being overly bright or distracting.

12. Warranty and Support

For any product-related issues, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.