HH HH-6188K-2.4G

Contents

HH-6188K-2.4G Kids Electric Car Remote Control Receiver Instruction Manual

For Models: HH-6188K-2.4G, HH-670K-2.4G, HH-619Y RC, HH-670Y RC

1. Product Overview

This manual provides instructions for the HH-6188K-2.4G series of remote control receivers and associated remote controls for children's electric riding cars. These components enable smooth start control and remote operation of compatible vehicles.

Two remote control receivers and two remote controls for kids' electric cars.

Figure 1: HH-6188K-2.4G Receiver and Remote Control Set

2. Specifications

FeatureDescription
Product NameChildren's electric car remote control receiver
MaterialPlastic
Voltage6V-12V
Remote Control Size14 cm * 8.5 cm
Compatible ModelsHH-619Y, HH-670K
Package Includes1*RC remote control/receiver
Is ElectricNo Battery (for receiver/remote unit itself)
Batteries IncludedNo
OriginMainland China
Recommended Age6-12 Years, 14+ Years
UseVehicles & Remote Control Toys
Package Dimensions (approx.)Length: 10cm, Width: 10cm, Height: 5cm
Package Weight (approx.)0.088 kg

3. Setup and Installation

3.1 Compatibility Check

Before installation, ensure the receiver is compatible with your child's electric car. Open the electric riding bike and locate the existing control box. Compare its appearance and the digital model number on the side of the control box with the new part. If they match, the part should be compatible.

Close-up of the HH-670K-2.4G receiver showing its model number label.

Figure 2: HH-670K-2.4G Receiver (Example)

3.2 Frequency Matching

For first-time use or after replacing batteries in the remote control, you will need to match the frequency between the remote control and the receiver. Follow these general steps:

  1. Ensure the electric car is powered off.
  2. Insert batteries into the remote control (if not already present).
  3. Press and hold the 'Match' or 'Code' button on the remote control (refer to your specific remote control model for exact button location).
  4. While holding the button, power on the electric car.
  5. The indicator light on the remote control should flash and then become solid, indicating successful pairing.
  6. Release the button and test the remote control functions.
Close-up of the HH-670Y RC remote control.

Figure 3: HH-670Y RC Remote Control (Example)

Close-up of the HH-619Y RC remote control.

Figure 4: HH-619Y RC Remote Control (Example)

4. Operating Instructions

Once the receiver and remote control are successfully paired, you can operate the electric car using the remote control. The specific functions (forward, backward, left, right, speed selection, etc.) will depend on the design of your remote control and the electric car model.

  • Power Button: Typically used to turn the remote control on/off.
  • Directional Buttons/Joystick: Control the movement of the car (forward, reverse, turn left, turn right).
  • Speed Selection: Some remotes may have buttons to adjust the speed of the car.
  • Smooth Start Control: This feature ensures a gradual acceleration, preventing sudden jerks for a more comfortable ride for the child.

5. Maintenance

  • Cleaning: Wipe the receiver and remote control with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Storage: Store the components in a dry place away from direct sunlight and extreme temperatures.
  • Battery Replacement: Replace remote control batteries as needed. Always use the correct type and size of batteries. Dispose of old batteries responsibly.
  • Inspection: Periodically check for any visible damage to the wiring or casing of the receiver and remote control.

6. Troubleshooting

  • Remote Control Not Responding:
    • Check if the remote control batteries are correctly inserted and have sufficient charge. Replace if necessary.
    • Ensure the remote control and receiver are properly paired (refer to Section 3.2 Frequency Matching).
    • Verify that the electric car is powered on.
  • Car Not Moving/Incorrect Movement:
    • Confirm the receiver is securely connected to the car's electrical system.
    • Re-check compatibility (Section 3.1). Ensure the digital model number on the side of the control box matches the replacement part.
    • Inspect for any loose wires or damaged connections.
  • Interference: If the remote control signal is erratic, try operating the car in an area with less electronic interference.

User Tips:

  • Always double-check the model number on your original control box before purchasing a replacement to ensure perfect compatibility.
  • When replacing the receiver, take a photo of the original wiring connections before disconnecting to aid in correct re-installation.

7. Safety and Compliance

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

This product is intended for use with children's electric riding toys. Adult supervision is recommended during operation.

8. Warranty and Support

For any issues not covered in this manual, please contact the seller or manufacturer for support. Keep your purchase receipt for warranty claims, if applicable. Specific warranty terms may vary by region and seller.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.