Hicon HZB-16M/HZB-16MT

Contents

Hicon Portable Electric Ice Maker Machine

Models: HZB-16M, HZB-16MT

1. Introduction

Welcome to the Hicon Portable Electric Ice Maker Machine. This manual provides essential information for the safe and efficient operation of your new ice maker. Designed for convenience, this compact appliance produces fresh, round ice cubes rapidly, making it ideal for home or small commercial use. Its smart control panel and intelligent sensor chip ensure ease of use and machine protection.

Hicon portable ice maker on a kitchen counter, a hand reaching for its handle.
The Hicon portable ice maker, ready for use on a kitchen counter.

2. Important Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:

  • Read all instructions before using the appliance.
  • Do not touch hot surfaces. Use handles or knobs.
  • To protect against electrical shock, do not immerse cord, plug, or appliance in water or other liquid.
  • Close supervision is necessary when any appliance is used by or near children.
  • Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
  • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
  • The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
  • Do not use outdoors.
  • Do not let cord hang over edge of table or counter, or touch hot surfaces.
  • Do not place on or near a hot gas or electric burner, or in a heated oven.
  • Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off,” then remove plug from wall outlet.
  • Do not use appliance for other than intended use.
  • Ensure adequate ventilation around the unit during operation.

3. Package Contents

Please check that all items are included in your package:

  • Hicon Ice Maker Unit
  • Product Instruction Manual (this document)
  • ABS Ice Shovel
Image showing the ice maker unit, product instruction manual, and an ice shovel as included items.
Included items: Hicon Ice Machine, Product Instruction, and an ABS ice shovel.

4. Specifications

Product Specifications
FeatureHZB-16MHZB-16MT
Power0.8A / 110W0.8A / 110W
Ice Cube Size25 x 28 mm25 x 28 mm
Ice Weight8-10g8-10g
Single Ice Production9 pieces9 pieces
Ice ShapeRound IceRound Ice
Single Ice Time6-13 minutes6-13 minutes
Ice Output in 24H15kg15kg
Water Inlet MethodManualManual
Machine Net Weight6.2kg6.2kg
Machine Gross Weight6.7kg6.7kg
Machine Size (W x D x H)222mm x 294mm x 290mm222mm x 294mm x 290mm
Voltage/Frequency220V/50Hz220V/50Hz
TypeHorizontalHorizontal
ConditionNewNew
OriginMainland ChinaMainland China

Note: The ice production is based on laboratory environment. Actual performance may vary depending on ambient temperature and water temperature. Please verify voltage compatibility for your region.

Diagram showing the dimensions of the ice maker: 222mm width, 294mm depth, 290mm height.
Dimensions of the Hicon Ice Maker.

5. Setup

  1. Unpack: Carefully remove the ice maker from its packaging. Retain packaging for future transport or storage.
  2. Placement: Place the ice maker on a stable, level surface away from direct sunlight and heat sources. Ensure there is at least 10-15 cm of space around the unit for proper ventilation.
  3. Initial Cleaning: Before first use, clean the interior of the ice maker with a soft cloth and mild detergent. Rinse thoroughly and wipe dry.
  4. Add Water: Open the lid and manually pour clean drinking water into the water reservoir up to the MAX fill line. Do not overfill.
  5. Connect Power: Plug the power cord into a grounded electrical outlet.
Hicon ice maker plugged into a wall outlet, demonstrating its installation-free design.
The ice maker is designed for easy plug-and-use setup.

6. Operating Instructions

Operating your Hicon ice maker is simple with its one-button design.

  1. Power On: After adding water and plugging in the unit, press the 'ON/OFF' button on the smart control panel to turn on the ice maker.
  2. Select Ice Cube Size: Use the 'SELECT' button to choose between small (S) or large (L) ice cubes. The corresponding indicator light will illuminate.
  3. Ice Making Process: The machine will automatically begin the ice-making cycle. You can observe the process through the transparent window. Each cycle produces 9 ice cubes in approximately 6-13 minutes.
  4. Ice Full Alert: The 'ICE FULL' indicator light will illuminate when the ice basket is full. The machine will pause ice production until some ice is removed.
  5. Water Shortage Reminder: If the water reservoir runs low, the 'ADD WATER' indicator light will turn on. Add more water to resume ice production.
  6. Collecting Ice: Use the provided ice shovel to remove ice cubes from the basket.
Three-step visual guide for ice making: add water, press start, collect ice.
Simple 3 steps for easy ice making: Power on and fill water, set parameters and start, then enjoy the ice.
Close-up of the smart control panel with illuminated buttons for adding water, ice full, power, and on/off/select.
The smart control panel allows for one-key operation.
Demonstration of the ice maker's operation, including adding water, selecting ice size, ice production, and draining.

7. Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your ice maker.

  • Draining Water: When not in use or for cleaning, puff out the drain plug located at the bottom of the unit to free water easily.
  • Interior Cleaning: Clean the interior water reservoir and ice basket with a diluted solution of water and vinegar or a mild detergent. Rinse thoroughly with clean water.
  • Exterior Cleaning: Wipe the exterior of the ice maker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: If storing for an extended period, ensure the unit is completely dry, drain all water, and store in a cool, dry place.
Image showing various design details including the comfortable portable handle, cooling fan cover, pure copper nickel-plated evaporator, and simple operation panel.
Key design features for durability and ease of maintenance: comfortable handle, cooling fan, pure copper nickel-plated evaporator, and simple control panel.

8. Troubleshooting

If you encounter issues with your ice maker, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Ice maker not turning onNo power, loose plugEnsure unit is properly plugged into a working outlet. Check circuit breaker.
No ice productionWater reservoir empty, drain plug not inserted, ambient temperature too highAdd water to the reservoir. Ensure the drain plug is securely in place. Operate in a cooler environment.
"ADD WATER" indicator is onWater level is lowRefill the water reservoir.
"ICE FULL" indicator is onIce basket is fullRemove ice from the basket.
Ice cubes are too small or softWater temperature too high, selected ice size is smallUse colder water. Select the 'L' (large) ice cube size.
Unusual noise during operationNormal compressor operation, unit not levelSome noise is normal. Ensure the unit is on a stable, level surface.

9. User Tips

  • For optimal ice quality and to prevent mineral buildup, use filtered or distilled water.
  • To speed up the initial ice production, use pre-chilled water in the reservoir.
  • Regularly empty and clean the water reservoir and ice basket to maintain hygiene and prevent odors.
  • If you notice a decrease in ice production efficiency, ensure the air vents are not blocked to allow for proper heat dissipation.

10. Warranty and Support

For warranty information or technical support, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.