Introduction
The JIKONG JK-BD4A24S6P is an intelligent active balance Battery Management System (BMS) designed for Li-Ion, LiFePo4, and LTO battery packs ranging from 8S to 24S configurations. This advanced BMS provides crucial protection and management functions, including active cell balancing, overcharge protection, over-discharge protection, overcurrent protection, and short circuit protection. Its robust design with a full aluminum alloy shell ensures excellent heat dissipation and durability. This manual provides essential information for the proper installation, operation, and maintenance of your JIKONG BMS.

Features
- Intelligent Active Balance: Transfers energy from higher to lower energy cells for minimal loss, operating continuously during charging, discharging, or idle states.
- Wide Battery Compatibility: Supports 8S-24S Li-ion, LiFePo4, and LTO battery types.
- High Current Capability: Continuous charge/discharge current of 60A, with instantaneous current up to 200A-450A.
- Multi-interface Display: Monitor battery status via mobile APP (iOS, Android, HarmonyOS), PC software, or an external dedicated display screen.
- Comprehensive Protection: Includes overcharge, over-discharge, overcurrent, and short circuit protection.
- Advanced Communication: Features major interfaces such as GPS, RS485, CAN, Display, Heating, and NTC.
- High-Performance MCU: Equipped with a main control chip for efficient and accurate operation.
- Robust Construction: Full aluminum alloy shell provides excellent heat dissipation, anti-voltage, and anti-vibration properties.
- Precise Monitoring: Voltage detection accuracy of ±0.015V and short circuit protection response within 10-500μs.
- Protocol Compatibility: Supports various mainstream inverter communication protocols (e.g., Deye, Pylontech, Growatt, Victron Energy).

Specifications
| Attribute | Value |
|---|---|
| Model | JK-BD4A24S6P |
| Cells Supported | 8S-24S |
| Battery Type | Li-ion, LiFePo4, LTO |
| Charging Current (Continuous) | 60A |
| Discharge Current (Continuous) | 60A |
| Balance Current | 0.4A - 2A (Active Balance) |
| Balance Function | Active Balanced BMS |
| BMS Type | Smart BMS |
| Charge and Discharge Port | Common Port BMS |
| Protection Functions | Overcharge, Over Discharge, Overcurrent, Short Circuit |
| Voltage Detection Accuracy | ±0.015V |
| Short Circuit Protection Response | 10-500μs |
| Certifications | CE, FCC |
| Usage Scenario | Power BMS, Energy Storage BMS, 3C Digital BMS |
| High-concerned chemical | None |
| Origin | Mainland China |

Setup
Package Contents
Before installation, verify that all components are present:
- BMS unit x 1
- Switch x 1 (50cm long)
- NTC thermistor x 1 (40cm long)
- Sampling line B x 1 (70cm long)
- Sampling line A x 1 (70cm long)

Installation and Wiring
Follow these general steps for installation. Refer to the wiring diagrams for specific connections based on your battery configuration.
- Connect all necessary cables (sampling lines, NTC, switch) to the BMS.
- Insert the sampling cables into the designated ports on the BMS.
- Connect the B-line (battery negative) and P-line (power output negative) to your battery pack.
Important: Ensure all connections are secure and correctly polarized to prevent damage to the BMS or battery pack.
Wiring Diagram for 24-String Cells

Wiring Diagram for 16-String Cells

BMS Interface Details

Operating the BMS
Monitoring and Data Connection
The JIKONG BMS offers multiple ways to monitor your battery system and access data:
- Mobile App: Download the "JIKONG SMART BMS" app, available for iOS, Android, and HarmonyOS. The app supports multiple languages and provides a clear overview of all battery information.
- PC Software: Utilize the dedicated PC software for detailed monitoring and parameter adjustments.
- External Display Screen: Connect a JIKONG home storage dedicated display for quick visual checks of key parameters like voltage, current, temperature, and state of charge (SOC).


Parameter Adjustment
You can freely adjust multiple protection values such as overcharge, over-discharge, overcurrent, temperature, and balance settings. If you need to adjust these parameters, first read the internal parameters of the protection board using the mobile app or PC software, and then make the desired changes.

Inverter Communication Protocol
The BMS supports protocol docking with mainstream inverter communication protocols. This can be set up easily through the mobile app or host computer software.

Maintenance
Proper maintenance ensures the longevity and optimal performance of your JIKONG BMS and battery pack.
- Regular Monitoring: Periodically check the battery parameters via the app or display to ensure all cells are within healthy voltage ranges.
- Firmware Updates: Keep the BMS firmware updated to benefit from performance improvements and new features. Check the official JIKONG website or app for updates.
- Connection Integrity: Periodically inspect all wiring connections for tightness and corrosion. Loose connections can lead to resistance and heat buildup.
- Environmental Conditions: Ensure the BMS operates within its specified temperature range. The aluminum alloy shell aids in heat dissipation, but extreme temperatures should be avoided.
- Cleaning: Keep the BMS clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquids or abrasive cleaners.
Active Balancing Benefits
The active balancing feature of the JIKONG BMS significantly improves the equilibrium efficiency of your battery pack, increasing it by up to 400%. This helps to prevent the dilemma of the battery not being fully charged or fully discharged, leading to a longer lifespan and more stable performance.

Excellent Balance Effect

Troubleshooting
This section provides general guidance for common issues. For complex problems, contact JIKONG technical support.
- BMS Not Powering On:
- Check all power connections (B- and P- lines) to ensure they are correctly connected and secure.
- Verify the battery pack voltage is within the operational range for the BMS.
- Cell Imbalance Issues:
- Ensure sampling lines are correctly connected to each cell and are not loose or damaged.
- Check the active balancing current setting in the app/software.
- Allow sufficient time for the active balancing to work, especially for large capacity packs.
- Over-protection Triggered (Overcharge/Over-discharge/Overcurrent):
- Review the protection parameters in the app/software. They might be set too aggressively for your application.
- Check the battery pack's health. A weak cell can trigger protection prematurely.
- For overcurrent, ensure the load does not exceed the BMS's continuous or instantaneous current ratings.
- Communication Issues (Bluetooth/RS485/CAN):
- Ensure the communication module is correctly connected.
- For Bluetooth, check that the app is installed correctly and permissions are granted.
- For RS485/CAN, verify wiring and protocol settings match your inverter or host system.
- Temperature Alarms:
- Check the NTC thermistor connection and placement.
- Ensure adequate ventilation around the BMS and battery pack.
- Reduce load if the temperature consistently runs high.
User Tips
- Optimize Battery Lifespan: Leverage the active balancing feature by allowing the BMS to operate continuously. This ensures cells remain balanced, which is crucial for maximizing the overall lifespan and performance of your battery pack.
- Regular Data Review: Periodically check the detailed data provided by the mobile app or PC software. Understanding your battery's behavior (voltage, current, temperature, SOC) can help you anticipate and prevent potential issues.
- Customization for Application: The JIKONG BMS is versatile and suitable for various applications, including e-bikes, electric tricycles, forklifts, RV energy storage, and power tools. Tailor the protection parameters in the software to best suit your specific use case and battery chemistry.
- Heat Management: While the aluminum alloy shell provides excellent heat dissipation, ensure the BMS is installed in a location with good airflow, especially in high-current applications, to maintain optimal operating temperatures.

Warranty and Support
JIKONG products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your seller. For technical support, troubleshooting assistance, or inquiries regarding customization, please reach out to JIKONG customer service or visit the official JIKONG website for contact information.