Introduction
This manual provides instructions for the setup, operation, and maintenance of your 10.4-inch LTD104EDZS LCD Screen and HDMI LCD Controller Board (VS-TY2660H-V1). This kit is designed to provide a high-resolution display solution for various applications, including retro video game systems and custom display projects.
Product Specifications
LCD Controller Board (VS-TY2660H-V1)
- Compatibility: Works for LVDS Interface LCD Screens.
- Input Power Adapter: 12V DC, more than 2A.
- Standby Mode: Less than 1W power consumption when no signal input.
- Video Input: HDMI.
- OSD Functions: Brightness, Contrast, Auto Adjustment, Language selection (English, French, German, Spanish, Italian, etc.).
- Board Dimensions: 74mm x 53mm x 12mm.
10.4" LTD104EDZS LCD Screen
- Display Mode: IPS, Normally Black, Transmissive.
- Resolution: 1024 (RGB) × 768.
- Outline Size: 219.1 × 173.8 × 6.3 mm (H×V×D).
- Display Area: 210.432 × 157.824 mm (H×V).
- Brightness: 245 cd/m² (Typical).
- Contrast Ratio: 250:1 (Typical) (TM).
- Viewing Angle: 60/70/70/60 (Typical) (CR≥10) [Left / Right / Up / Down].
- Signal Interface: LVDS (1 channel, 6-bit) 25-Pin Connector.
- Backlight: WLED.
- Input Voltage: 3.3V (Typical).
Packing List
The package includes the following components:
- 1 × HDMI LCD Controller Board (VS-TY2660H-V1)
- 1 × 10.4" LTD104EDZS 1024x768 LCD Screen
- 1 × LVDS Cable
- 1 × Keyboard with Cable
- 1 × Remote Control (Battery not included)
Setup Instructions
Follow these steps to assemble and connect your LCD screen and controller board:
- Connect the LVDS Cable: Carefully connect the LVDS cable to the 25-pin connector on the 10.4" LTD104EDZS LCD screen. Ensure the connection is secure and correctly oriented.
- Connect LVDS Cable to Controller Board: Connect the other end of the LVDS cable to the 30P LVDS Interface on the HDMI LCD Controller Board (VS-TY2660H-V1).
- Connect Keyboard: Attach the keyboard with its cable to the designated "KeyBoard" connector on the controller board.
- Connect Inverter (if applicable): If your specific LCD panel requires an external inverter for the backlight, connect it to the "Inverter" port on the controller board. The LTD104EDZS uses WLED backlight, which is typically integrated, but verify your specific panel.
- Connect Power Supply: Connect a 12V DC power adapter (minimum 2A) to the "Power Supply" input on the controller board.
- Connect HDMI Source: Connect your HDMI video source (e.g., retro console, PC, Raspberry Pi) to the "HDMI" input port on the controller board.
Important Note:
Always ensure all connections are made while the power supply is disconnected to prevent damage to the components. Double-check the orientation of the LVDS cable to avoid incorrect insertion.
Operating Instructions
Once the setup is complete and power is applied, the LCD screen should power on. You can control the display settings using the provided remote control or the onboard keyboard.
Using the Remote Control
The remote control allows access to the On-Screen Display (OSD) menu for various adjustments. (Note: Batteries for the remote control are not included.)
- Power Button: Turns the display on/off.
- Menu Button: Opens the OSD menu.
- Arrow Buttons (Up/Down/Left/Right): Navigate through menu options and adjust values.
- Enter/OK Button: Confirms selections.
OSD Menu Functions
The OSD menu provides options to adjust display parameters:
- Brightness: Adjusts the overall luminance of the screen.
- Contrast: Controls the difference between the brightest and darkest areas of the display.
- Auto: Automatically adjusts display settings for optimal picture quality (often used for initial setup).
- Language: Selects the OSD menu language (English, French, German, Spanish, Italian, etc.).
- Other settings may include color temperature, aspect ratio, and input source selection.
Maintenance
To ensure the longevity and optimal performance of your LCD screen and controller board, follow these maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth to gently wipe the screen. For stubborn marks, slightly dampen the cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials.
- Dust: Keep the controller board and connectors free from dust. Use compressed air or a soft brush if necessary.
- Temperature and Humidity: Operate and store the unit in a dry environment within recommended temperature ranges. Avoid extreme temperatures and high humidity.
- Power: Always use the specified 12V DC power adapter. Disconnect power when not in use for extended periods.
Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/Black screen |
|
|
| Distorted or flickering image |
|
|
| Remote control not working |
|
|
User Tips
Based on common practices for electronic components, here are some helpful tips:
- When connecting the LVDS cable, ensure the correct side is facing up. Incorrect insertion can damage the board or screen.
- For retro gaming setups, ensure your video source is configured to output 1024x768 resolution for optimal display quality.
- Consider mounting the controller board securely to prevent accidental disconnections or damage, especially in portable or frequently moved projects.
Warranty and Support
This product is covered by a warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the seller's policy or contact customer support.
If you experience any issues or have questions not covered in this manual, please contact the seller for assistance. Provide your product model number and a detailed description of the problem to facilitate quicker support.
The seller offers a 30-day money-back or replacement policy for defective or non-working products upon receipt. Returned items must be in original, unused condition with all accessories and the warranty label intact.
Product Video Overview
Watch this video for a visual overview of the product components and their appearance.