Flytec V030-18

Contents

Flytec V030/V080 Remote Control Instruction Manual

Model: V030-18 | Brand: Flytec

1. Product Overview

This manual provides detailed instructions for the Flytec V030/V080 Remote Control, designed specifically for the Flytec 12V GPS Bait Boat models V030 and V080. This controller features a built-in battery and is essential for operating your bait boat's various functions, including navigation, bait release, and fish finding capabilities.

Front view of the Flytec V030/V080 remote control
Front view of the Flytec V030/V080 Remote Control, showing the screen and control sticks.
Rear view of the Flytec V030/V080 remote control
Rear view of the remote control, highlighting the integrated stand.

2. Setup

2.1 Unpacking

Carefully remove all components from the packaging. Ensure you have the remote control and any included accessories, such as the hanging rope.

2.2 Battery Information

The remote control features a built-in Lithium Battery. It comes with batteries included. Ensure the remote control is adequately charged before first use. Specific charging instructions are not provided, but typically involve connecting to a standard USB power source.

2.3 Pairing the Remote Control with the Boat

It is crucial to correctly pair the remote control with the boat's circuit board, especially after replacing either component. The remote control is only suitable for original Flytec V030/V080 models.

  1. Place the bait boat in a horizontal position.
  2. Hold down the 'CALIBRATION' button on the remote control.
  3. While holding 'CALIBRATION', turn on the boat's power switch.
  4. Observe the boat's tail lights. When they start to flicker, quickly turn on the remote control's power switch.
  5. Continue to observe the remote control's indicator light. Once it stays on and the boat signal icon appears on the screen (refer to Figure 2 in the diagram below), you can release the 'CALIBRATION' button. The frequency matching is now successful.
Diagram showing the pairing process for the Flytec remote control and bait boat.
Figure 1 (left) shows the remote control and boat in position for pairing. Figure 2 (right) illustrates the successful pairing indication on the remote's screen.

Note: If the remote control is paired with a non-original or incompatible circuit board, it may not function correctly.

Diagram of the boat's circuit board with labeled components
Detailed diagram of the boat's circuit board, labeling key components such as GPS Module, Battery Indicator, Switch, Right Motor, Left Motor, and various lights and hook/silo connections.

3. Operating Instructions

The Flytec remote control provides comprehensive control over your bait boat's functions. Familiarize yourself with the buttons and their corresponding actions.

3.1 Basic Controls

  • Control Sticks: Used for directional movement of the boat.
  • CALIBRATION: Used during the pairing process and potentially for recalibrating boat movement.
  • FISHING GROUND: Allows setting and selecting specific fishing locations.
  • ORIGIN: Sets the home point for the boat, crucial for the electronic fence and return functions.
  • CLEAR: Clears selected settings or anchor points.
  • CANCEL: Cancels current operations or selections.
  • OK: Confirms selections or actions.
  • Directional Arrows: Used for menu navigation and fine-tuning settings.

3.2 Bait Boat Features

The remote control enables the following features on your Flytec bait boat:

  • Bait Loading: Supports single or dual hopper free switching, with a bait loading capacity of up to 3kg (6.6lbs).
  • Fish Finder Integration: Easy installation of a fish finder device. The fish finder operates wirelessly up to 100m (328ft) with a sonar beam angle of 90 degrees, detecting depths from 2-120ft.
  • Dual Motor System: Equipped with a 550 Dual Motor system, offering 2-speed mode switching for varied water conditions.
  • Fishing Net Release: Features a dual fishing net release device.
  • Hook Support: Designed to support hanging a fish hook and placing the hook into the den.
  • Control Range: Operates on a 2.4GHz frequency, providing an effective control distance of 800 meters.
  • Electronic Fence: After setting the origin, the boat activates an electronic fence function, preventing it from sailing beyond a safe distance of 500 meters.
  • Navigation Modes: Supports Normal, Autopilot, and Anchor Points Navigation. You can set up to 9 fishing grounds, with each ground allowing 20 anchor points, totaling 180 anchor points.
  • Night Operation: Features double high brightness night navigation lights and turn signal lights for visibility in low-light conditions.
  • Lost Signal Return: The boat is programmed to automatically return to its origin if the signal connection becomes poor.
Product demonstration video showcasing the Flytec V030/V080 bait boat's features and the remote control's capabilities.

4. Maintenance

4.1 General Care

  • Keep the remote control clean and dry. Avoid exposure to extreme temperatures, humidity, or direct sunlight.
  • Use a soft, dry cloth to clean the surface. Do not use harsh chemicals or abrasive cleaners.
  • Protect the screen from scratches.

4.2 Battery Care

  • The built-in Lithium Battery should be charged regularly, even if not in use, to maintain its lifespan.
  • Avoid fully discharging the battery frequently.
  • Store the remote control in a cool, dry place when not in use for extended periods.

5. Troubleshooting

If you encounter issues with your Flytec remote control, refer to the following common problems and solutions:

5.1 Remote Control Not Connecting/Pairing with Boat

This is a common issue, as indicated by user questions. Ensure you follow the pairing steps precisely:

  1. Place the boat horizontally and ensure both the boat and remote are powered off.
  2. Press and hold the 'CALIBRATION' button on the remote.
  3. Turn on the boat's power switch. The boat's tail lights should flicker.
  4. Immediately turn on the remote control's power switch.
  5. Release the 'CALIBRATION' button once the remote's indicator light is solid and the boat signal icon appears on the screen.

If pairing fails, repeat the steps. Ensure the remote control is an original Flytec V030/V080 model and compatible with your boat's circuit board.

5.2 Limited Control Range

  • Ensure the remote control's battery is fully charged.
  • Check for any obstructions between the remote and the boat.
  • Avoid operating in areas with high electromagnetic interference.
  • Verify that the boat's antenna is properly extended and undamaged.

5.3 Buttons Unresponsive

  • Check if the remote control's battery is low.
  • Ensure no debris is lodged around the buttons.
  • If the issue persists, contact customer support.

6. Specifications

FeatureSpecification
Model NumberV030-18
Brand NameFlytec
Dimensions (L x W x H)15.4 x 12.1 x 4.6 cm
Net Weight720g
MaterialComposite Material
Battery TypeBuilt-in Lithium Battery
Batteries IncludedYes
Control Frequency2.4GHz
Effective Control Distance800m
Electronic Fence Range500m (from origin)
Recommended Age14+ years
CertificationCE
UsageVehicles & Remote Control Toys (for Bait Boats)
Fish Finder Sonar Beam Angle90 degrees
Fish Finder Wireless Range100m / 328ft
Fish Finder Depth Detection2-120ft
Bait Loading Capacity3kg / 6.6lbs
Motor System550 Dual Motor, 2-speed
Flytec V030-18 Remote Control with hanging rope, showing item number, weight, and size.
Item No.: V030-18, Item: Remote Control & Hanging Rope, Net Weight: 720g, Size: 15.4x12.1x4.6cm.

7. User Tips

  • Always perform the pairing procedure carefully as outlined in Section 2.3 to ensure proper communication between the remote and the boat. Incorrect pairing is a common reason for operational issues.
  • Before each use, ensure both the remote control and the bait boat batteries are fully charged to maximize operational time and range.
  • When using the electronic fence function, always set your 'ORIGIN' point accurately to prevent the boat from exceeding your desired operational area.
  • Regularly inspect the remote control for any physical damage or wear, especially to the control sticks and buttons.

8. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your original Flytec bait boat or contact the Flytec Official Store directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.