JIKONG JK-BD4A17S4P

Contents

JIKONG Smart BMS JK-BD4A17S4P User Manual

Model: JK-BD4A17S4P | Brand: JIKONG

1. Introduction

The JIKONG Smart BMS JK-BD4A17S4P is an intelligent active balance power management system designed for 8S-17S Li-Ion, LiFePo4, and LTO battery packs. This BMS provides comprehensive protection and management features, including active balancing, overcharge/discharge protection, overcurrent protection, and short circuit protection. It supports multi-interface display options and various communication protocols, making it suitable for a wide range of applications from power BMS to energy storage and 3C digital devices.

JIKONG Smart BMS with battery packs and phone app display

Figure 1: JIKONG Intelligent Active Balance Power Management System (BMS) in a typical setup.

2. Safety Information

Please read and understand all safety instructions before installing or operating the JIKONG Smart BMS. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always wear appropriate personal protective equipment (PPE) when working with batteries and electrical systems.
  • Ensure all power sources are disconnected before making any connections or disconnections.
  • Verify correct polarity for all connections to prevent damage to the BMS and battery pack.
  • Do not short-circuit the battery terminals or BMS connections.
  • Keep the BMS away from water, moisture, and flammable materials.
  • Only use the BMS within its specified voltage and current limits.
  • Installation should be performed by qualified personnel familiar with battery management systems and electrical safety.

3. Package Contents

Verify that all items are present in your package:

  • BMS x 1
  • Switch key x 1 (long 50cm)
  • NTC x 1 (long 40cm)
  • Sampling line B x 1 (long 70cm)
  • Sampling line A x 1 (long 70cm)
JIKONG Smart BMS Packing List

Figure 2: Contents of the JIKONG Smart BMS package.

JIKONG BMS Accessories

Figure 3: Optional JIKONG BMS accessories including various display types, switch key, RS485 module, and interface board.

4. Product Overview and Features

The JIKONG Smart BMS JK-BD4A17S4P is an advanced battery management system with intelligent active balancing technology. It is designed to optimize battery performance and prolong lifespan by efficiently managing cell voltage differences.

Key Features:

  • Active Balancing: Transfers energy from higher voltage cells to lower voltage cells with minimal energy loss, ensuring continuous voltage balance. Balancing current is 0.4A (400mA).
  • Wide Compatibility: Supports 8S-17S Li-ion, LiFePo4, and LTO battery types.
  • Robust Protection: Includes overcharge protection, over-discharge protection, overcurrent protection, and short circuit protection. Short circuit protection response time is 10-500μs.
  • High-Performance MCU: Equipped with a main control chip for efficient operation.
  • Excellent Heat Dissipation: Features a full aluminum alloy shell for superior thermal management.
  • Multi-interface Display: Supports mobile app (iOS, Android, HarmonyOS), PC software, and external display screens for comprehensive monitoring.
  • Rich Interfaces: Includes GPS, RS485, CAN, Bluetooth (BT), NTC (temperature sensors), Soft Switch, SOC Indicator, and Key Switch.
  • Adjustable Parameters: Freely adjust protection values such as overcharge, over-discharge, overcurrent, temperature, and balance via the software.
  • Inverter Communication: Compatible with mainstream inverter communication protocols (e.g., Deye, PYLONTECH, Growatt, Victron Energy, INVT, SMA, SRNE).
JIKONG Smart BMS JK-BD4A17S4P key features

Figure 4: Overview of JIKONG Smart BMS JK-BD4A17S4P features and specifications.

JIKONG Smart BMS internal components and cooling

Figure 5: Exploded view showing the internal components, Jikong MCU, NTC, sampling lines, and cooling aluminum alloy shell.

JIKONG Smart BMS rich interface diagram

Figure 6: Diagram illustrating the various communication and sensor interfaces available on the BMS.

5. Specifications

Detailed technical specifications for the JIKONG Smart BMS JK-BD4A17S4P:

Attribute Value
Model JK-BD4A17S4P
Brand Name JIKONG
Type LIFEPO4 Battery BMS
Battery Strings 8S-17S
Handware or Smart SMART BMS
Balance Function Active Balanced BMS
Balancing Current 400mA (0.4A)
Charge and Discharge Port Common Port BMS
Charging Current 40A
Discharge Current 40A
Function Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
Voltage detection accuracy ±0.015v
Short circuit protection response 10~500μs
Usage Scenario Power BMS, Energy Storage BMS, 3C Digital BMS
Certification CE, FCC
Package Weight 0.363 kg
Package Dimensions (L x W x H) 21 x 16 x 4 cm
JIKONG Smart BMS Product Parameters Table

Figure 7: Detailed product parameters table for various JIKONG BMS models, including the JK-BD4A17S4P.

6. Installation and Wiring

Proper installation and wiring are critical for the safe and effective operation of your BMS. Please follow these steps carefully:

  1. Prepare the Battery Pack: Ensure your battery cells are balanced and at a safe voltage level before connecting the BMS.
  2. Connect all Cables: Carefully connect all balance wires (sampling lines) to their respective battery cell terminals, starting from the lowest cell (B-) to the highest cell (B+). Ensure the order is correct.
  3. Insert Cables into BMS: Insert the balance cable connector into the designated port on the BMS. Ensure it is securely seated.
  4. Connect B-line and P-line: Connect the main negative (B-) wire from your battery pack to the B- terminal on the BMS. Connect the main output/charge negative (P-) wire from your load/charger to the P- terminal on the BMS. The main positive (P+) from the battery pack connects directly to the load/charger.
  5. Connect NTC (Temperature Sensor): If included, connect the NTC temperature sensor to the battery pack and plug its connector into the BMS.
  6. Connect Switch Key: Connect the switch key to its designated port on the BMS. This allows for manual power control.
  7. Verify Connections: Double-check all connections for correct polarity and secure fitment before applying power.

Warning: Incorrect wiring can cause severe damage to the BMS, battery, and connected equipment, and poses a fire hazard.

JIKONG Smart BMS 16-string wiring diagram

Figure 8: Example wiring diagram for a 16-string cell configuration. Adapt this diagram to your specific battery string count (8S-17S).

7. Operating Instructions

The JIKONG Smart BMS offers multiple ways to monitor and control your battery system:

7.1 Mobile App (JIKONG SMART BMS)

The mobile app provides real-time data and control over your BMS. It supports iOS, Android, and HarmonyOS. Scan the QR code on the BMS unit or refer to the product packaging for the app download link.

  • Connection: Connect to the BMS via Bluetooth.
  • Monitoring: View real-time voltage, current, temperature, State of Charge (SOC), and cycle count.
  • Parameter Adjustment: Adjust protection values such as overcharge/discharge voltage, overcurrent limits, and temperature thresholds.
  • Communication Protocols: Select and configure inverter communication protocols directly from the app.

7.2 PC Software

For more advanced configuration and detailed data logging, use the JIKONG PC software. The software allows for precise adjustment of all BMS parameters and provides a comprehensive overview of battery performance.

  • Connection: Connect the BMS to your PC via an RS485 or CAN interface (if customized and available).
  • Real-time Data: Monitor all battery parameters, including individual cell voltages, temperatures, and protection statuses.
  • Parameter Configuration: Adjust all configurable parameters of the BMS. Always understand the implications of changes before applying them.
  • Firmware Updates: The PC software may also be used for firmware updates (refer to official JIKONG support for instructions).

7.3 External Display Screen

Optional external display screens (2.5-inch, 3.2-inch, 4.3-inch touch display) can be connected to the BMS to provide a quick visual overview of key battery parameters without needing a phone or PC.

JIKONG Smart BMS display options

Figure 9: Various display options for the JIKONG Smart BMS, including mobile app, PC software, and dedicated hardware display.

JIKONG Smart BMS PC software interface

Figure 10: Screenshot of the JIKONG PC software interface for intelligent interaction and parameter adjustment.

JIKONG Smart BMS mobile app CAN protocol selection

Figure 11: Mobile app interface demonstrating the selection of supported CAN communication protocols.

8. Maintenance

To ensure the longevity and optimal performance of your JIKONG Smart BMS, consider the following maintenance guidelines:

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
  • Cleanliness: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Environmental Conditions: Operate the BMS within its specified temperature and humidity ranges. Avoid extreme conditions.
  • Software Updates: Check for and install any available firmware or software updates from JIKONG to ensure you have the latest features and bug fixes.
  • Battery Health: Regularly monitor your battery pack's health through the app or PC software. Address any cell imbalances or abnormal readings promptly.

9. Troubleshooting

If you encounter issues with your JIKONG Smart BMS, refer to the following basic troubleshooting steps:

9.1 Common Issues and Solutions:

  • BMS Not Powering On:
    • Check all main power connections (B- and P-) to ensure they are secure and correctly wired.
    • Verify the battery pack voltage is within the operational range of the BMS.
    • Ensure the switch key is in the 'ON' position, if applicable.
  • App/PC Software Not Connecting:
    • For Bluetooth (app), ensure Bluetooth is enabled on your device and the BMS is within range.
    • For RS485/CAN (PC), verify the communication cable is correctly connected and the correct COM port/settings are selected in the software.
    • Restart the app/software and try again.
  • Cell Imbalance Warnings:
    • Allow the BMS to perform active balancing. This may take time depending on the imbalance and battery capacity.
    • Check individual cell voltages via the app/software to identify severely imbalanced cells.
    • Inspect balance wiring for loose connections or damage.
  • Overcharge/Over-discharge Protection Triggered:
    • Ensure your charger's voltage is set correctly and not exceeding the BMS's overcharge protection voltage.
    • Avoid deep discharging your battery pack. Adjust load or charging habits.
    • Check the protection parameters in the app/software to ensure they are set appropriately for your battery type.
  • Overcurrent/Short Circuit Protection Triggered:
    • Reduce the load on the battery.
    • Check for any short circuits in the wiring or connected devices.
    • Ensure the BMS's continuous and peak current ratings are sufficient for your application.

For persistent issues, consult the detailed troubleshooting guide within the JIKONG app/PC software or contact JIKONG technical support.

10. User Tips

  • Initial Setup: Before connecting the BMS, ensure all individual battery cells are as close in voltage as possible. This will significantly reduce the initial balancing time.
  • Software Familiarization: Spend time exploring the JIKONG mobile app or PC software. Understanding its features and settings will help you optimize your battery system's performance and diagnose issues quickly.
  • Temperature Monitoring: Pay attention to the temperature readings from the NTC sensors, especially during high charge/discharge cycles. Excessive heat can degrade battery life.
  • Regular Data Review: Periodically review the historical data and logs available in the software to track battery health and identify any trends that might indicate potential problems.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact JIKONG Official Store directly through their official channels. Keep your purchase receipt as proof of purchase.

JIKONG is committed to providing high-quality products and customer satisfaction. For the most up-to-date support resources, please visit the official JIKONG website or contact their customer service team.

© 2024 JIKONG Official Store. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.