To Users
Thank you for choosing LTWOO products. For your safety and to ensure correct usage, please read this operation manual carefully before using the product. Follow all instructions provided.
Notice!
This manual contains information applicable to all products in this series and other products of the same class. Some information about products or functions not configured for your specific purchase may appear. For installation, adjustment, maintenance, and other information not explicitly covered here, please consult your local dealer or seller, or visit the official website of L-TWOO (http://www.ltwoo.com/). Product images in this manual may differ from the actual product; always refer to the physical product. Proper use ensures product quality and a better riding experience.
Warning!
- To prevent injury or damage to equipment, do not dismantle, install, or modify the product abnormally. Such actions may cause severe damage to the equipment and endanger personal safety.
- The package contains small parts and mechanical transmissions. Keep them away from children to prevent accidents like accidental ingestion or pinching. In case of such incidents, seek immediate first aid and medical treatment.
Product Overview
The LTWOO T3 1x8 Speed system includes a right-hand shifter and a rear derailleur designed for reliable and precise gear changes on bicycles.
Video: Overview of the LTWOO T3 Shifter and Rear Derailleur components.
Component Identification
Rear Derailleur (RD-T800-L)
Familiarize yourself with the key parts of the rear derailleur:
- Mounting Screw: Secures the derailleur to the frame.
- Tension Adjustment Screw: Adjusts cable tension for shifting precision.
- Shift Cable Groove: Path for the shifting cable.
- L Limit Screw (Low Limit Screw): Prevents the chain from overshifting into the spokes on the largest cassette cog.
- H Limit Screw (High Limit Screw): Prevents the chain from overshifting off the smallest cassette cog.
- Locking Screw: Secures the shifting cable.
- Guide Wheel: Upper pulley that guides the chain.
- Tension Wheel: Lower pulley that maintains chain tension.
- Damper: Internal mechanism for stabilizing the derailleur.
Image: LTWOO T3 Rear Derailleur (RD-T800-L).
Diagram: Detailed view of the Rear Derailleur with labeled parts.
Shifter (SL-T800)
Familiarize yourself with the key parts of the shifter:
- Lever: Main lever for shifting.
- Two-way Release Lever: Allows shifting to smaller cogs by pushing or pulling.
- Fine-tuning Knob: Micro-adjusts cable tension for precise shifting.
Image: LTWOO T3 Right Shifter (SL-T800).
Diagram: Detailed view of the Shifter with labeled parts.
Setup and Installation
Shifter Installation
- Install the shifter and brake lever onto the handlebar. It is recommended that the handlebar's outer diameter be 22.2 mm or less. Position the shifter on the inner side of the brake lever and tighten its screws securely.
- Completely release the shifter's gear position by pulling the release lever until it can no longer move. Remove the rubber plug from the shifter. Pass the shifting cable through the wire groove. Once the cable is through, replace the rubber plug and install the shifting cable tube.
Image: Shifter and brake lever mounted on a handlebar, showing the locking screw.
Diagram: Shifter cable routing through the shifter body and cable tube.
Rear Derailleur Installation
- Tighten the mounting screw of the rear derailleur to the frame. When installing, ensure that the stop plate and the hook blocker are in seamless contact. A gap between these parts can negatively affect shifting performance. Recommended torque: 8-10 N·m.
- Pass the shifting cable through the wire groove on the rear derailleur and slightly turn the locking screw to secure the shifting cable.
- Chain Length Adjustment: First, cut the chain to a suitable length. For optimal chain length, install the chain on the largest cassette sprocket and the largest chainring. After joining the two ends of the chain, there should be 4-5 extra links.
- Pass the chain correctly through the rear derailleur, ensuring proper threading, and then connect the buckle.
Diagram: Rear Derailleur mounting points, emphasizing tight contact between stop plate and hook blocker.
Diagram: Shifting cable routing and locking screw on the rear derailleur.
Diagram: Method for determining correct chain length.
Diagram: Correct chain threading through the rear derailleur.
Adjustment
- H Limit Screw Adjustment (Smallest Cassette): After the chain is correctly installed, turn the crank. Adjust the H screw while observing from the rear. The center of the guide wheel should be aligned with the outer end surface of the smallest cassette. Ensure the guide pulley is clear of the smallest cassette to prevent the chain from falling off or causing noise.
- Shift Cable Tension and Fine-tuning Knob: Tighten the shift cable. Use the fine-tuning knob on the shifter to adjust the smoothness of the chain moving up and down the cassette.
- L Limit Screw Adjustment (Largest Cassette): When the chain is on the largest cassette, adjust the L screw on the derailleur. This prevents the chain from falling between the sprocket and the spokes. The center of the guide wheel should be aligned with the center of the largest cassette.
Diagram: Adjusting the H screw to align the guide wheel with the smallest cassette cog.
Diagram: Adjusting the L screw to align the guide wheel with the largest cassette cog.
Operating Instructions
The LTWOO T3 1x8 Speed system is designed for intuitive gear changes:
- Shifting to Larger Cogs (Easier Gear): Use the main lever to shift the chain to larger sprockets on the cassette.
- Shifting to Smaller Cogs (Harder Gear): Use the two-way release lever. This lever can be pushed forward or pulled towards you to shift the chain to smaller sprockets.
- Fine-tuning: If shifting feels imprecise, use the fine-tuning knob on the shifter to make small adjustments to cable tension until shifting is smooth and crisp.
Maintenance
- Replace Shifting Cable Core: If the wire core shows signs of wear (fraying, broken strands), replace it promptly. To do this, adjust the shifter to the high-speed gear (smallest cassette cog), loosen the rear derailleur's cable locking screw, apply slight force to push out the old cable, and then install the new shifting cable core.
- Adjust Damping Strength: Over time, if the damping strength of the rear derailleur feels reduced, you can adjust it. Open the damping cover and turn the damper screw to increase the damping strength as needed.
- Add Grease: Regular maintenance should include applying special grease to the joints of the rear derailleur to maintain smooth shift quality, especially after extended use.
Diagram: Steps for replacing the shifting cable core.
Diagram: Location of the damper screw for adjusting damping strength.
Troubleshooting
- Chain Noise or Falling Off: This often indicates incorrect H or L limit screw adjustment. Re-check and adjust according to the 'Adjustment' section. Ensure the guide wheel is properly aligned with the smallest (H) and largest (L) cogs.
- Shifting Not Smooth or Hesitant: This can be due to incorrect cable tension. Use the fine-tuning knob on the shifter to adjust the tension. Also, check if the shifting cable core is worn and needs replacement.
- Reduced Damping Strength: If the rear derailleur feels less stable or chain slap increases, the damping strength may need adjustment. Refer to the 'Adjust Damping Strength' section under 'Maintenance'.
- Stiff Shifter Lever: Ensure the shifter is properly lubricated and the cable runs freely without kinks or excessive friction.
Specifications
LTWOO T3 Right Shifter (SL-T800)
| Feature | Specification |
|---|---|
| Model | SL-T800-8 |
| Speed | 8S |
| Side | Right |
| Main Material | Composite Plastic |
| Lever Material | Composite Plastic |
| Window Indicator | No |
| Wire Length | 2100mm |
| Color | Black+White |
| Weight | 141g |
LTWOO T3 Stabilize Damping Rear Derailleur (RD-T800-L)
| Feature | Specification |
|---|---|
| Model | RD-T800-L |
| Speed | 8S |
| Main Material | Aluminium |
| Cage Material | Steel |
| Cage Length | Long (Wheel base: 83mm) |
| Max Gear Range | 11T-42T |
| Color | Black+White |
| Weight | 358g |
User Tips
- For a stiffer clutch and to potentially reduce chain noise on 8-speed setups, consider tightening the removable clutch mechanism bolt screw on the rear derailleur to approximately 8 N·m.
- The derailleur cable guide is made of a firm plastic (possibly POM or glass fiber reinforced nylon). While robust, be mindful of potential damage from impacts.
- Note that the shifter lever for engaging smaller cogs (harder gears) may primarily operate by pushing forward, rather than pulling towards the rider.
- The cable entrance on the shifter is covered by a soft rubber pad. This might be prone to degradation over time. For long-term durability, some users might prefer a design with a more robust plastic screw for cable insertion, similar to some other brands.
Warranty and Support
For detailed warranty information, technical support, or to find a local dealer, please visit the official LTWOO website at http://www.ltwoo.com/. You may also refer to the original user manual PDF for additional information: User Manual (PDF).