Introduction
Thank you for choosing the ROMOSS PPB10 10000mAh 10W Power Bank. This portable charger is designed to provide reliable power for your mobile devices on the go. With its compact size and efficient charging capabilities, it's an ideal companion for daily use and travel. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new power bank.

Figure 1: ROMOSS PPB10 Power Bank Overview
Product Features
- High Capacity: 10000mAh (37Wh) rated battery capacity.
- Dual-Channel Output: 10W output for efficient charging.
- Compact & Lightweight: Weighs approximately 229g, ultra-thin design.
- Multiple Protections: Built-in 10 layers of protection for safe charging.
- LED Indicator: Four LED lights to display remaining power.
- Universal Compatibility: Compatible with various smartphones and tablets.
Setup
1. Initial Charging of the Power Bank
Before first use, it is recommended to fully charge your ROMOSS PPB10 Power Bank. Use a 5V/2.1A adapter (not included) with the Type-C input port for optimal charging speed.

Figure 2: Charging the Power Bank via Type-C Input
Charging times vary based on the adapter used:
- With a 5V/2.1A adapter: Approximately 6.5 hours.
- With a 5V/1A adapter: Approximately 13 hours.

Figure 3: Power Bank Charging Speed Comparison
2. Identifying Ports
The power bank features the following ports and indicators:

Figure 4: Power Bank Ports and Display
- Type-C Port: 5V/2.1A Input (for charging the power bank).
- USB-A Port: 5V/2.1A Output (for charging external devices).
- LED Display: Indicates the remaining battery capacity.
Operating Instructions
1. Charging Your Devices
To charge your smartphone, tablet, or other compatible devices:
- Connect one end of your device's charging cable to the USB-A output port of the power bank.
- Connect the other end of the cable to your device.
- The power bank will automatically begin charging your device.

Figure 5: Charging a Device via USB-A Output
The power bank supports simultaneous charging of multiple devices if both output ports are used.

Figure 6: Simultaneous USB Output Charging
2. Understanding the LED Indicator
The power bank features four LED lights that indicate the remaining battery capacity:
- 1 LED lit: ≤ 20% capacity remaining
- 2 LEDs lit: 26%-50% capacity remaining
- 3 LEDs lit: 51%-75% capacity remaining
- 4 LEDs lit: 76%-100% capacity remaining

Figure 7: LED Capacity Indicator Guide
Maintenance
- Keep the power bank away from extreme temperatures, direct sunlight, and humid environments.
- Avoid dropping or subjecting the power bank to strong impacts.
- Clean the power bank with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store the power bank in a cool, dry place when not in use for extended periods.
- It is recommended to fully charge and discharge the power bank at least once every three months to maintain battery health.
Troubleshooting
1. Power Bank Not Charging
- Ensure the charging cable is securely connected to both the power bank's Type-C input and the power adapter.
- Verify that the power adapter is functioning correctly and plugged into a live power outlet.
- Try using a different Type-C cable and/or power adapter.
2. Device Not Charging from Power Bank
- Check if the power bank has sufficient charge (refer to the LED indicator).
- Ensure the charging cable is securely connected to both the power bank's USB-A output and your device.
- Try using a different charging cable for your device.
- Verify that your device is compatible with 5V/2.1A charging.
3. Slow Charging
- Ensure you are using a 5V/2.1A power adapter to charge the power bank for faster charging.
- For charging devices, ensure your cable is of good quality and supports the required current.
- Some devices may limit charging speed based on their battery status or internal temperature.
Specifications
The ROMOSS PPB10 Power Bank offers the following technical specifications:
| Attribute | Value |
|---|---|
| Product Name | Fast charging source |
| Product Model | PPB10 |
| Battery Type | Rechargeable Lithium-ion Battery |
| Rated Capacity | 5800mAh (5V/3A) |
| Rated Battery Capacity | 10000mAh (37Wh) |
| Weight | ~229g |
| Input (Type-C) | 5V⎯3A or 9V⎯2A or 12V⎯1.67A |
| Output (USB-A) | 5V⎯3A or 9V⎯2A or 12V⎯1.5A |
| Output (Type-C) | 5V⎯3A or 9V⎯2.22A or 12V⎯1.67A |
| Max Output | 10W |
| Dimensions | ~L142 x W66 x H15.9mm |
| Shell Material | Plastic |
| Features | With LED Lamp |
| Support Quick Charge Technology | No (Note: QC18W+PD20+FCP18 output is mentioned in raw data, but 'No' for general quick charge support. Clarifying based on 'Max Output 10W' and 'No' in properties.) |
| Certification | RoHS, CE, FCC |
| Meets Air Transport Standards | Yes |

Figure 8: Packaging Parameters and Specifications
Safety Features
The power bank is equipped with 10 layers of protection for safe and reliable operation:

Figure 9: Built-in Safety Protections
- Over-charge Protection
- Over-current Protection
- Reset Protection
- Over-temperature Protection
- Over-voltage Protection
- Over-discharge Protection
- Anti-reverse Protection
- Power-surge Protection
- Short-circuit Protection
- RFI Protection
User Tips
- For best performance, use original or certified charging cables with your power bank and devices.
- The compact size makes it ideal for travel; it meets air transport standards.
- Always check the LED indicators to monitor the power bank's remaining charge before heading out.
- Avoid fully draining the power bank regularly to prolong its lifespan.
Warranty and Support
ROMOSS provides 12-months free maintenance for this product. The buyer is responsible for shipping costs associated with returning the product for maintenance. If any parts require replacement, the buyer will be responsible for the cost of those parts.
For further assistance or warranty claims, please contact the seller or ROMOSS customer support with your purchase details.