JIKONG JK-BD4A17S4P

Contents

JIKONG JK-BD4A17S4P Smart Active BMS User Manual

Model: JK-BD4A17S4P

Supports 8S-17S Cells Compatible With Li-ion, LiFePO4, LTO Batteries

1. Product Overview

The JIKONG JK-BD4A17S4P Smart Active Battery Management System (BMS) is designed for large capacity series lithium battery packs. It features voltage acquisition, high current active balancing, overcharge, over-discharge, overcurrent, over-temperature protection, a coulomb meter, Bluetooth communication, and optional GPS remote functions. This BMS is compatible with lithium iron phosphate, ternary lithium, and lithium titanate battery types.

The protection board utilizes energy transfer active balancing technology with independent intellectual property rights, achieving a maximum continuous 0.4A balance current. This high-current active equalization technology ensures battery consistency, improves battery range, and extends battery life.

A mobile APP (supporting Android and iOS) is available for connecting to the protection board via Bluetooth. The APP allows users to check battery status, modify working parameters, and control charge/discharge switches. Its compact size, simple operation, and comprehensive functions make it suitable for various applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

JIKONG JK-BD4A17S4P Smart Active BMS with key features
Figure 1.1: JIKONG JK-BD4A17S4P BMS with highlighted features: BT/Display, Battery BMS, 0.4A Balancing Current, 8S-17S Battery Strings, 40A Charge/Discharge, Li-ion/LiFePO4/LTO Battery Type.
JIKONG Intelligent Active Balance Power Management System (BMS) overview
Figure 1.2: Overview of JIKONG Intelligent Active Balance Power Management System (BMS).
Detailed features of JIKONG BMS including multi-interface display, major interfaces, high-performance MCU, full aluminum alloy shell, continuous current, and instantaneous current.
Figure 1.3: Key features: Multi-interface Display, Major interfaces (GPS/RS485/CAN/Display/Heating/NTC), High-performance MCU, Full Aluminum Alloy Shell, Continuous Current (40A-80A), Instantaneous Current (200A-450A).
Rich interface diagram showing various communication modes and physical ports on the BMS.
Figure 1.4: Rich interface diagram illustrating CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer, and physical ports for GPS, NTC, Heat, Display/Switch Key, Sampling port A/B.

2. Functional Characteristics

The JIKONG JK-BD4A17S4P BMS offers a wide range of functional characteristics:

  • LED Bluetooth status indicator
  • APP Bluetooth remote operation
  • Battery capacity calculation
  • High precision voltage acquisition (±3mV)
  • High precision current acquisition
  • Support information screen display
  • Accurate time logging
  • Support RS485 (Optional)
  • Support CAN (Optional)
  • Support parallel function (Optional)
  • Support alarm function (Optional)
  • Support heating function (Optional)
  • Support GPS communication
  • Charge overcurrent protection
  • Charge overvoltage protection
  • Charge over temperature protection
  • Low temperature protection during charge
  • Discharge overcurrent protection
  • Discharge undervoltage protection
  • Discharge over temperature protection
  • Short circuit protection
Animation demonstrating active balancing of battery cells
Figure 2.1: Active Balancing (Lossless Balancing) in action, showing energy transfer between cells.
Exploded view of the BMS showing internal components and cooling aluminum alloy.
Figure 2.2: High-quality design with cooling aluminum alloy, MOS, Jikong MCU, and sampling lines for efficient performance.
Close-up of the BMS board highlighting core components and protection response times.
Figure 2.3: Selected core components ensure voltage detection accuracy of ±0.015V and short circuit protection response of 10-500μs.
Diagram showing the full aluminum alloy shell and its superior heat dissipation.
Figure 2.4: The full aluminum alloy shell provides superior heat dissipation, protecting electronic components.

3. Specifications

3.1. Basic Parameters

ParameterValueUnit
Supply voltage20-100V
Operating power consumption<800mW
Operating temperature-30-70°C
Maximum number of collection strings24String
Maximum balancing current0.4A
Maximum charging current40A
Maximum discharge current40A
Maximum instantaneous current80A
Maximum internal loop resistance2.8mΩ
Protective plate size116*103*17.6mm
Finished weight205g

3.2. Default Parameters

ParameterLi-ionLiFePO4LTOUnit
Balancing initial voltage332V
Maximum balancing current0.40.40.4A
Unit overcharge voltage4.23.62.7V
Single overcharge protection recovery4.183.552.65V
Monomer undervoltage protection2.822.61.8V
Single undervoltage protection recovery2.852.651.85V
Automatic shutdown voltage2.82.51.7V
SOC-0% voltage2.92.61.85V
SOC-100% voltage4.183.52.65V
Trigger balancing differential pressure0.010.010.01V
Charging overcurrent protection delay303030S
Charge overcurrent protection release time606060S
Discharge overcurrent protection delay300300300S
Discharge overcurrent protection release time606060S
Short-circuit protection delay555μS
Short circuit protection release time303030S
Charging overtemperature protection temperature707070°C
Charge overtemperature restore temperature606060°C
Discharge overtemperature protection temperature707070°C
Discharge overtemperature recovery temperature606060°C
Charging low temperature protection temperature-20-20-20°C
Charge low temperature to restore temperature-10-10-10°C
MOS Overtemperature protection temperature100100100°C
MOS Overtemperature protection recovery temperature808080°C
Device address000/
Table of JIKONG Product Specifications
Figure 3.1: Detailed JIKONG Product Specifications table.

4. Installation & Wiring

4.1. Packing List

Before installation, please verify that all components are present:

Packing list for JIKONG BMS
Figure 4.1: Packing List: 1. BMS x 1, 2. Switch x 1 (long 50cm), 3. NTC x 1 (long 40cm), 4. Sampling line B x 1 (long 70cm), 5. Sampling line A x 1 (long 70cm).

4.2. Wiring Method

The JK-BD4A17S4P series protection board is suitable for 7-24 series lithium battery packs. Wiring methods vary depending on the number of cells in the battery pack. Always ensure all connections are secure and correct before powering on the BMS.

Wiring diagram for 24-string cells
Figure 4.2: Wiring diagram for a 24-string cell configuration, showing connections for B-, P-, P+, motor load, inverter, and charger.
Wiring diagram for 16-string cells
Figure 4.3: Wiring diagram for a 16-string cell configuration.

4.3. Interface Definition

The BMS features various connectors for different functions:

Product appearance with labeled connectors P1-P9
Figure 4.4: Product appearance with labeled connectors P1-P9.

P1 (HY2.0-15P) - Balance with Acquisition Interface:

  • Pin 1: B- (Total negative battery)
  • Pin 2-15: B1-B14 (Positive terminals for cells 1-14)

P2 (HY2.0-11P) - Balance with Acquisition Interface:

  • Pin 1-7: B15-B21 (Positive terminals for cells 15-21)
  • Pin 8-10: B22-B24 (Positive terminals for cells 22-24)
  • Pin 11: B+ (Protection board power supply, connected to the battery)

P3 (HY2.0-4P) - Temperature Interface:

  • Pin 1: T1A (First temperature sensor pin A)
  • Pin 2: T1B (First temperature sensor pin B)
  • Pin 3: T2A (Second temperature sensor pin A)
  • Pin 4: T2B (Second temperature sensor pin B)

P4 (HY2.0-4P) - 4 External Optional Temperature Interface:

  • Pin 1: T3A (Third temperature sensor pin A)
  • Pin 2: T3B (Third temperature sensor pin B)
  • Pin 3: T4A (Fourth temperature sensor pin A)
  • Pin 4: T4B (Fourth temperature sensor pin B)

P5 (1.25T-4PWT) - GPS Interface:

  • Pin 1: GND (Power/signal ground)
  • Pin 2: RX (UART_RX, 3.3V)
  • Pin 3: TX (UART_TX, 3.3V)
  • Pin 4: VGPS (Power output, voltage close to B+)

P6 (A1254WF-2A) - Buzzer Interface (Optional):

  • Pin 1: GND (Buzzer power negative)
  • Pin 2: VCC (Buzzer power supply positive)

P7 (A1254WF-4A) - Communication Interface (Optional):

  • Pin 1: CAN L (CAN signal negative terminal)
  • Pin 2: CAN H (CAN signal positive terminal)

P8 (A1254WF-6A) - Display Interface:

  • Pin 1: K- (Activation signal negative electrode)
  • Pin 2: K+ (Activation signal positive)
  • Pin 3: GND (Negative terminal)
  • Pin 4: B (Display RS485 signal negative)
  • Pin 5: A (Display RS485 signal positive)
  • Pin 6: VCC (Display power output)

P9 (A1254WF-3A) - Parallel Interface (Optional):

  • Pin 1: P-status (Parallel module status signal)
  • Pin 2: P-EN (Parallel module enable signal, output low level to turn on parallel module)
  • Pin 3: GND (Signal ground)

Heating Wire (16AWG-Orange-15CM) (Optional):

  • Pin 1: HT- (Heater element negative electrode)

4.4. Device Activation

Before powering on the protection board, ensure the balance cables are properly connected and that the P- and B- terminals are correctly connected. Verify that the protection board is securely fixed to the battery cells. Incorrect connections can lead to abnormal operation or damage.

The protection board does not have a physical power-on switch. It is designed for charging activation mode: after battery assembly, connect a charger (with voltage 2V higher than battery voltage) to activate the BMS.

Key activation and display activation are also supported. If using a display screen and button, simply insert the cable into the display interface and press the button to activate.

5. Operation Instructions

5.1. APP Installation and Parameter Setting

To download the mobile APP, scan the QR code below. The Android APP requires Android Version 7 or higher.

QR code for APP download and PC software interface
Figure 5.1: Mobile APP link QR code and PC software interface for intelligent interaction and parameter adjustment.

Once the APP is installed, you can connect to the BMS via Bluetooth to view battery information and adjust various parameters. For detailed parameter settings, refer to the 'Instructions for Setting Protection Board Parameters' document (PDF).

Multi-screen display options for JIKONG BMS data
Figure 5.2: Multi-screen display options: Mobile APP, PC software, and JIKONG home storage display.

5.2. Active Equalization

The BMS uses active equalization to transfer energy from higher voltage cells to lower voltage cells. Before using this function, set basic battery parameters (battery type, number of cells, battery capacity, trigger equalization differential pressure, voltage calibration, current calibration) in the APP. The default balance current is 0.4A. It is recommended that the balance current does not exceed 0.2C of the battery capacity. If not needed, the balancing function can be turned off in the APP.

Table showing excellent balance effect before and after balancing
Figure 5.3: Comparison of cell voltage differences before and after balancing, demonstrating improved cell consistency.

5.3. Protection Functions

The BMS includes several standard protection features, configurable via the APP:

  • Charge Overvoltage Protection: Prevents overcharging by shutting off charging when any cell exceeds the set overvoltage protection voltage. Charging resumes when all cells drop below the recovery voltage.
  • Discharge Undervoltage Protection: Prevents over-discharging by shutting off discharge when any cell drops below the set undervoltage protection voltage. Discharge resumes when all cells rise above the recovery voltage. Automatic shutdown occurs if any cell drops below the automatic shutdown voltage.
  • Charge Overcurrent Protection: Shuts off charging if the current exceeds the set continuous charging current for a specified delay. Charging resumes after the overcurrent release time.
  • Discharge Overcurrent Protection: Shuts off discharge if the current exceeds the set continuous discharge current for a specified delay. Discharge resumes after the overcurrent release time. The maximum continuous discharge current is 40A.
  • Over Temperature Protection: Shuts off charging/discharging if the BMS detects temperatures above the set limits. Operation resumes when temperatures return to safe levels.
  • Low Temperature Protection: Shuts off charging if the BMS detects temperatures below the set limits. Charging resumes when temperatures rise to safe levels. For extremely cold areas, the optional heating function is recommended.
  • Short Circuit Protection: Automatically triggers with a default delay and recovery time. If short circuit protection is triggered upon initial connection of a charger or load, increasing the protection delay in the APP may resolve issues caused by high peak currents or large load capacitance.

5.4. Additional Functions

  • Heating Function (Optional): Heats the battery at low temperatures to prevent reduced activity. Designed for a 10A heating current. Control via APP. A secondary temperature control switch (45-65°C) in series is recommended.
  • Alarm Function (Optional): Provides alerts for safety risks like overtemperature, overcharge, and overdischarge.
  • Battery Parallel Function (Optional): Supports parallel battery packs. Requires parallel modules and disabling 'charging current limiting' in the APP.
  • Emergency Switch: A standard feature that allows 30 minutes of simultaneous charge and discharge operation in critical situations (e.g., over-temperature, over-discharge, over-charge, cell drop) to prevent system failure.
  • Intelligent Sleep: A standard feature that can be enabled/disabled via the APP. The BMS enters sleep mode (shuts down) if charge/discharge current is less than 1A for 26 consecutive hours, reducing self-consumption. It can be reactivated by a button or charger.
  • Communication Function (Optional): Supports CAN and RS485. Configurable via the APP for address and protocol. Refer to the Jikong Protection Board communication protocol document for details.
JIKONG home storage dedicated display showing battery status
Figure 5.4: JIKONG home storage dedicated display provides real-time information on voltage, current, temperature, and number of strings.
Mobile app interface for selecting CAN protocols
Figure 5.5: Mobile app interface for protocol docking, allowing selection of various CAN protocols.

6. Maintenance

The JIKONG BMS is designed for durability and reliability. Regular maintenance primarily involves ensuring proper connections and monitoring performance via the APP.

  • Connection Checks: Periodically inspect all wiring, especially balance cables and main power connections (P- and B-), for looseness, corrosion, or damage.
  • Firm Mounting: Ensure the BMS remains securely fixed to the battery pack to prevent vibration-induced damage.
  • Software Updates: Keep the mobile APP updated to the latest version to benefit from new features, bug fixes, and improved performance.
  • Parameter Review: Occasionally review the BMS parameters in the APP to ensure they are still appropriate for your battery configuration and usage patterns.
  • Environmental Conditions: Operate the BMS within its specified temperature range (-30°C to 70°C). If operating in extreme cold, utilize the optional heating function to protect battery cells.

7. Troubleshooting

If you encounter issues with your JIKONG JK-BD4A17S4P BMS, consider the following:

  • BMS Not Activating: Ensure the balance cables are correctly connected and the P- and B- terminals are secure. The BMS activates via charging (charger voltage 2V higher than battery voltage) or by pressing a button if a display is connected.
  • Frequent Short Circuit Protection: If short circuit protection triggers upon initial connection of a charger or load, it might be due to high peak currents or large load capacitance. Try increasing the short circuit protection delay in the APP settings.
  • Protection Triggered (Overvoltage, Undervoltage, Overcurrent, Overtemperature): Check the battery cell voltages, currents, and temperatures via the APP. Adjust the protection and recovery parameters if necessary, ensuring they are within safe limits for your battery type.
  • Communication Issues: Ensure Bluetooth is enabled on your mobile device and the BMS. If using optional CAN/RS485, verify the physical connections and check the communication protocol settings in the APP.
  • Unusual Behavior/Burning Smell: Immediately disconnect power from the battery pack and BMS. This indicates a serious issue, likely a wiring error or component failure. Do not re-energize until the problem is identified and resolved.

8. User Tips

  • Always double-check all wiring connections before applying power to prevent damage to the BMS or battery pack.
  • For optimal battery life, ensure your active balancing current is set appropriately, ideally not exceeding 0.2C of your battery's capacity.
  • In cold environments, consider using the optional heating function to maintain battery performance and longevity.
  • Regularly monitor your battery's health and BMS parameters through the mobile APP for proactive maintenance.

9. Support & Documentation

For more detailed information, including comprehensive parameter settings and advanced troubleshooting, please refer to the official user manual PDF:

View User Manual (PDF)

For further assistance, please contact JIKONG Smart BMS Store customer support.

© 2024 JIKONG Smart BMS Store. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.