1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the JIKONG JK-B2A8S20P Smart Battery Management System (BMS). Designed for 4S-8S Li-ion, LiFePO4, and LTO battery packs, this BMS offers advanced protection and balancing features to ensure optimal battery performance and longevity. Please read this manual thoroughly before using the product.
2. Product Overview
The JIKONG JK-B2A8S20P is an intelligent protection board specifically designed for large-capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, over-temperature protection, coulomb metering, Bluetooth communication, and optional GPS remote capabilities.
This BMS utilizes energy transfer active balancing technology with independent intellectual property rights, achieving a maximum continuous balance current of 1A/2A. This high-current active equalization technology significantly enhances battery consistency, extends battery range, and delays battery aging.
A mobile application (APP) compatible with Android and iOS operating systems is available. The APP connects to the BMS via Bluetooth, allowing users to monitor battery status, modify working parameters, and control charge/discharge switches. Its compact size, ease of operation, and comprehensive functionality make it suitable for various applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.


3. Features
The JIKONG JK-B2A8S20P Smart BMS offers a wide range of features to ensure comprehensive battery management:
- LED Bluetooth status indicator
- APP Bluetooth remote operation
- Battery capacity calculation
- High precision voltage acquisition (±3mV)
- High precision current acquisition
- Support information screen display
- Accurate time logging
- Support RS485 (Optional)
- Support CAN (Optional)
- Support ACC detection function (Optional)
- Support heating function (Optional)
- Support parallel function (Optional)
- Support alarm function (Optional)
- Support GPS communication
- Charge overcurrent protection
- Charge overvoltage protection
- Charge over temperature protection
- Low temperature protection during charge
- Discharge overcurrent protection
- Discharge undervoltage protection
- Discharge over temperature protection
- Short circuit protection



4. Specifications
4.1. General Specifications
- Brand Name: JIKONG
- Type: LI-ION Battery BMS
- Hardware or Smart: SMART BMS
- Balance Function: Active Balanced BMS
- Charge and Discharge Port: Common Port BMS
- Functions: Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
- Charging Current: 200A
- Usage Scenario: Power BMS, Energy Storage BMS, 3C Digital BMS
- Certification: NONE
- High-concerned chemical: None
- Origin: Mainland China
4.2. Basic Parameters
| Parameter | Value | Unit |
|---|---|---|
| Supply voltage | 7.5-36 | V |
| Operating power consumption | <900 | mW |
| Operating temperature | -30-70 | °C |
| Maximum number of collection strings | 8 | String |
| Maximum balancing current | 1 or 2 | A |
| Maximum charging current | 200 | A |
| Maximum discharge current | 200 | A |
| Maximum instantaneous current | 400 | A |
| Maximum internal loop resistance | 0.35 | mΩ |
| Protective plate size | 152.25×127.26×15.6 | mm |
| Finished weight | 424 | g |

4.3. Dimensions


5. Setup & Installation
5.1. Packing List
Please verify that all components are present in the package:
- BMS x 1
- Sampling line x 1 (70cm long)
- NTC (Temperature Sensor) x 1 (40cm long)
- Switch x 1 (50cm long)

5.2. Wiring Instructions
The JK-BxA8S-20P series protection board is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure correct polarity and secure connections.
- Connect all balance cables to the BMS.
- Insert the main cable into the BMS.
- Connect the B-line and the P-line to the battery.


5.3. Interface Definitions
The BMS features various interfaces for connectivity and functionality:

| Connector | Pin | Name | Definition |
|---|---|---|---|
| P1 (XH-10AW-2.54) Balance & Acquisition Interface | 1 | B- | Total negative battery |
| 2 | B1 | The first battery positive | |
| ... | ... | ... | |
| 9 | B8 | The eighth battery positive | |
| 10 | B+ | Protection board power supply, connected to the battery | |
| P2 (A1254WF-2A) Buzzer Interface (Optional) | 1 | GND | Buzzer power negative |
| 2 | VCC | Buzzer power supply positive | |
| P3 (A1254WF-4A) Communication Interface (Optional) | 1 | CAN_L | CAN signal negative terminal |
| 2 | CAN_H | CAN signal positive terminal | |
| 3 | RS485_A | RS485 signal positive terminal | |
| 4 | RS485_B | Negative terminal of RS485 signal | |
| P4 (1.25T-4PWT) GPS Interface | 1 | GND | Power/signal ground |
| P5 (HY2.0-4P) 4-way External Temperature Interface (Optional) | 1 | T5A | Fifth temperature sensor pin A |
| 2 | T5B | Fifth temperature sensor pin B | |
| 3 | T4A | Fourth temperature sensor pin A | |
| 4 | T4B | Fourth temperature sensor pin B | |
| P6 (HY2.0-4P) Temperature Interface | 1 | T2A | Second temperature sensor pin A |
| 2 | T2B | Second temperature sensor pin B | |
| 3 | T1A | First temperature sensor pin A | |
| 4 | T1B | First temperature sensor pin B | |
| P7 (A1254WF-6A) Display Interface | 1 | VCC | Display power output |
| 2 | A | The display RS485 signal is positive | |
| 3 | B | Display RS485 signal negative | |
| 4 | GND | Negative terminal | |
| 5 | K+ | Activate the positive signal | |
| 6 | K- | Activation signal negative electrode | |
| P8 (A1254WF-3A) Parallel Interface (Optional) | 1 | P-status | Parallel module status signal |
| P9 (A1254WF-5A) ACC Interface (Optional) | 1 | ACC+ | ACC Positive |
| 2 | ACC- | ACC Negative | |
| 4 | C_Detect+ | The charger output 12V positive | |
| Heating wire (16AWG-Orange-15CM) | 1 | HT- | Heater element negative electrode |
Bluetooth Connection Indicator (D1): When Bluetooth is connected to the protection board, the indicator is steady on. When the connection is disconnected, the indicator blinks.
P- Terminal: Connects to external load or negative terminal of charger, equipped with M6 screws.
B- Terminal: Connects to the negative battery terminal, equipped with M6 screws.
6. Operation
6.1. Device Activation
Before powering on the protection board, ensure the balance cable is properly connected and that P- and B- terminals are correctly wired. Verify that the protection board is securely fixed to the battery pack. Incorrect installation can lead to abnormal operation or damage.
The protection board does not have a power-on control switch. It is designed for charging activation mode, meaning the charger voltage must be 2V higher than the battery voltage. After battery assembly, connect the charger to activate the BMS.
Alternatively, the BMS supports key activation and display activation. If you have an optional display screen and button, simply connect the cable to the display interface and press the button to activate.
6.2. APP Installation and Parameter Setting
To install the mobile APP, scan the QR code below. An Android device requires Android Version 7 minimum.

After installation, connect the APP to the BMS via Bluetooth to access settings. Refer to the "Instructions for Setting Protection Board Parameters" for detailed guidance on configuring parameters such as:
- Active Equalization: Set balance trigger voltage difference (mV). The default balance current is 1A/2A. Adjust based on battery capacity (recommended not to exceed 0.2C).
- GPS & Display Interface: The BMS reserves a GPS port for location tracking and a display interface for optional JIKONG displays to view battery information.
- Heating Function (Optional): For low-temperature environments, the BMS supports heating via resistance heaters or films (20A current). Control via APP. A temperature control switch (45°C to 65°C normally closed) is recommended for secondary protection.
- Alarm Function (Optional): The BMS can trigger external alarms for safety risks like over-temperature, overcharge, or over-discharge.
- Battery Parallel Function (Optional): Supports parallel battery packs when used with parallel modules. Disable "charging current limiting" in the APP.
- ACC Detection Function (Optional): Enables discharge. Can be activated by applying 20V-100V between ACC+ and ACC-, or by short-circuiting them. Also includes charger detection (C_detect+ and C_detect- for 12V charger output).
- Protection Functions:
- Charge Overvoltage Protection: User-set single overcharge protection and recovery voltages. BMS turns off charging if any cell exceeds the set voltage.
- Discharge Undervoltage Protection: User-set battery undervoltage protection, recovery, and automatic shutdown voltages. BMS closes discharge if any cell falls below the set voltage.
- Charge/Discharge Overcurrent Protection: User-set continuous current, delay, and release times. BMS closes charge/discharge if current exceeds limits. (Max continuous discharge current not to exceed 200A).
- Over/Low Temperature Protection: User-set charge/discharge over-temperature and low-temperature protection and recovery values. BMS closes charge/discharge if temperatures are outside safe ranges.
- Short Circuit Protection: User-set delay (µs) and recovery time (S). BMS protects against short circuits.
- Emergency Switch: Activates charge and discharge for 30 minutes in case of over-temperature, over-discharge, over-charge, or cell drop issues, allowing emergency use.
- Intelligent Sleep: BMS enters sleep mode if charge/discharge current is less than 1A for 26 consecutive hours to reduce self-consumption. Activate via button or charger.
- Communication Function (Optional): Supports CAN and RS485. Set address and protocol via APP.


7. Maintenance
To ensure the longevity and reliable operation of your JIKONG JK-B2A8S20P Smart BMS, regular maintenance is recommended:
- Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage. Ensure the BMS is securely mounted and free from physical stress.
- Cleaning: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
- Firmware Updates: Check the JIKONG official website or APP for any available firmware updates. Keeping the firmware up-to-date can improve performance, add new features, and fix bugs.
- Environmental Conditions: Ensure the BMS operates within its specified temperature range (-30°C to 70°C). Avoid exposing the unit to excessive moisture or extreme temperatures.
8. Troubleshooting
If you encounter issues with your JIKONG JK-B2A8S20P Smart BMS, refer to the following common problems and solutions:
- BMS Not Activating: Ensure all battery connections (B-, P-, and balance leads) are correct and secure. The BMS requires activation by connecting a charger (charger voltage 2V higher than battery voltage) or by pressing an optional activation button/display.
- Balancing Issues: Verify that active equalization is enabled in the APP and that the balance trigger voltage difference is set appropriately. Ensure all cell voltages are within a reasonable range.
- Protection Triggered Frequently: Check the APP for specific protection alarms (e.g., overvoltage, undervoltage, overcurrent, over-temperature). Adjust protection parameters if necessary, ensuring they align with your battery's specifications and operating conditions.
- Bluetooth Connectivity Problems: Ensure the BMS is powered on and within range. Restart the APP and try reconnecting. Check your mobile device's Bluetooth settings.
- Inaccurate Readings: If voltage or current readings appear incorrect, perform a calibration via the APP if available, or consult the detailed parameter setting instructions.
For persistent issues, please refer to the comprehensive PDF user manual or contact JIKONG customer support.
9. User Tips
- Initial Setup: Always double-check all wiring connections before applying power to prevent damage. Incorrect wiring is a common cause of issues.
- APP Monitoring: Regularly use the mobile APP to monitor your battery's health and performance. This allows you to catch potential issues early.
- Parameter Customization: Take advantage of the customizable protection parameters in the APP. Tailor them to your specific battery chemistry (Li-ion, LiFePO4, LTO) and application needs for optimal safety and efficiency.
- Temperature Management: If operating in cold climates, consider utilizing the optional heating function to maintain battery performance and prevent low-temperature charging issues.
- Documentation: Keep this user manual and the detailed PDF manual handy for quick reference during installation, operation, and troubleshooting.
10. Frequently Asked Questions (FAQ)
- Q: What battery types are compatible with the JK-B2A8S20P BMS?
- A: The BMS is compatible with Li-ion, LiFePO4, and LTO battery types, supporting 4S-8S configurations.
- Q: How do I activate the BMS after installation?
- A: The BMS activates when a charger is connected, with the charger voltage being 2V higher than the battery voltage. Optional button or display activation is also available.
- Q: Can I monitor the BMS from my smartphone?
- A: Yes, the JIKONG Smart BMS has a dedicated mobile APP for Android and iOS that connects via Bluetooth for monitoring and parameter adjustment.
- Q: What is the maximum continuous discharge current?
- A: The maximum continuous discharge current is 200A. The maximum instantaneous current is 400A.
- Q: Is there protection against short circuits?
- A: Yes, the BMS includes short circuit protection with customizable delay and recovery times.
11. Warranty & Support
For detailed warranty information and technical support, please refer to the official JIKONG documentation or contact your seller. A comprehensive PDF user manual is available for download at JIKONG User Manual (PDF).
JIKONG Technology Co. LTD is committed to providing high-quality products and customer service. For any inquiries or assistance, please reach out to their authorized support channels.